Potential use of thermophilic dark fermentation effluents in photofermentative hydrogen production by Rhodobacter capsulatus

Biological hydrogen production by a sequential operation of dark and photofermentation is a promising route to produce hydrogen. The possibility of using renewable resources, like biomass and agro-industrial wastes, provides a dual effect of sustainability in biohydrogen production and simultaneous waste removal. In this study, photofermentative hydrogen production on effluents of thermophilic dark fermentations on glucose, potato steam peels (PSP) hydrolysate and molasses was investigated in indoor, batch operated bioreactors. An extreme thermophile Caldicellulosiruptor saccharolyticus was used in the dark fermentation step, and Rhodobacter capsulatus (DSM1710) was used in the photofermentation step. Addition of buffer, Fe and Mo to dark fermentor effluents (DFEs) improved the overall efficiency of hydrogen production. The initial acetate concentration in the DFE needed to be adjusted to 30–40 mM by dilution to increase the yield of hydrogen in batch light-supported fermentations. The thermophilic DFEs are suitable for photofermentative hydrogen production, provided that they are supplemented with buffer and nutrients. The overall hydrogen yield of the two-step fermentations was higher than the yield of single step dark fermentations.     

Metal accumulation in sediment,water, and freshwater fish in a Dam Lake

Metal concentrations were determined in water, sediment, and freshwater fish samples (Squalus cephalus, Barbus esocinus, and Barbus xanthopterus) collected from Karakaya Dam Lake, Turkey, to estimate the risk of human consumption and pollution. Metal concentrations differed between the species (p??Zn?=?Cu in water and Fe?>?Zn?>?Mn?>?Ni?>?Cu in sediment. In general, the accumulation order of elements in the tissues all of the species sampled were found as Fe?>?Zn?>?Se?>?Mn?>?Cu?>?Ni?>?Cd in muscle, Zn?>?Fe?>?Mn?>?Se?>?Cu?>?Ni?>?Cd in gills, Fe?>?Zn?>?Se?>?Mn?>?Cu?>?Ni?>?Cd in liver and gonad, and Zn?>?Fe?>?Cu?>?Mn?>?Se?>?Ni?>?Cd in kidney. It was concluded that the fish from the dam lake are not heavily burdened with metals, but they should be controlled periodically to avoid excessive intake of trace metals by humans, and to monitoring the pollution of aquatic environment.     

Prenatal diagnosis of laryngeal atresia

Prenatal diagnosis of congenital atresia of the larynx is difficult but is possible by the findings of increased lung echogenicity and size coexisting with fetal ascites in ultrasonography. Sonographic findings may not always be typical. We report on a case of congenital laryngeal atresia diagnosed prenatally by the findings of fetal hydrops and hyperechogenic lungs. Our case presented with oligohydramnios. We also review syndromes that demonstrate laryngeal anomalies. Copyright © 2003 John Wiley & Sons, Ltd.     

Biological hydrogen production by Rhodobacter capsulatus in solar tubular photo bioreactor

The purpose of this study was to develop a pilot scale tubular photo bioreactor (80 L) for photo fermentative hydrogen production by photosynthetic purple-non-sulfur bacterium, Rhodobacter capsulatus, operating in outdoor conditions, using acetate as the carbon source. The reactor was operated continuously in fed-batch mode for 30 days throughout December 2008 in Ankara. It was placed in a greenhouse in order to keep the temperature above freezing levels. It was found that R. capsulatus had a rapid growth with a specific growth rate of 0.025 h^?1 in the exponential phase. The growth was defined with modified logistic model for long term duration. The hydrogen production and feeding started in the late exponential phase. Evolved gas contained 99% hydrogen and 1% carbon dioxide by volume. The average molar productivity calculated during daylight hour was 0.31 mol H₂/(m³ h) with regard to the total reactor volume and 0.112 mol H₂/(m²·day) with regard to the total illuminated surface area. It was proven that even at low light intensities and low temperatures, the acetic acid which was fed to the system can be utilized for biosynthesis, growth and hydrogen production. The overall hydrogen yield was 0.6 mole H₂ per mole of acetic acid fed. This study showed that photofermentation in a pilot scale tubular photo bioreactor can produce hydrogen, even in winter conditions.     

Nanosecond pulsed laser micromachining of PMMA-based microfluidic channels

This paper reports an investigation into the effects of nanosecond laser processing parameters on the geometry of microchannels fabricated from polymethylmethacrylate (PMMA). The Nd:YAG solid-state pulsed laser has a wavelength of 1064 nm and a measured maximum power of 4.15 W. The laser processing parameters are varied in a scanning speed range of 400–800 pulses/mm, a pulse frequency range of 5–11 Hz, a Q-switch delay time range of 170–180 μs. Main effects plots and microchannel images are utilized to identify the effects of the process parameters for improving material removal rate and surface quality simultaneously for laser micromachining of microchannels in PMMA polymer. It is observed that channel width and depth decreased linearly with increasing Q-switch delay time (hence average power) and increased non-linearly with higher scanning rates and not much affected by the increase in pulse frequency.     

Quality and Quantity of Leachate in Aerobic Pilot-Scale Landfills

In this study, two pilot-scale aerobic landfill reactors with (A1) and without (A2) leachate recirculation are used to obtain detailed information on the quantity and quality of leachate in aerobic landfills. The observed parameters of leachate quality are pH, chloride (Cl⁻), chemical oxygen demand (COD), biological oxygen demand (BOD), total Kjeldahl nitrogen (TKN), ammonia nitrogen (NH₃-N), and nitrate (NO₃^–-N). pH values of the leachate increased to 7 after 50 days in reactor A1 and after 70 days in reactor A2. Cl⁻ concentrations increased rapidly to 6100 (A1) and 6900 (A2) mg/L after 80 days, from initial values of 3000 and 2800 mg/L, respectively. COD and BOD values decreased rapidly in the A1 landfill reactor, indicating the rapid oxidation of organic matter. The BOD/COD ratio indicates that leachate recirculation slightly increases the degradation of solid waste in aerobic landfills. NH₃-N concentrations decreased as a result of the nitrification process. Denitrification occurred in parts of the reactors as a result of intermittent aeration; this process causes a decrease in NO₃⁻ concentrations. There is a marked difference between the A1 and A2 reactors in terms of leachate quantity. Recirculated leachate made up 53.3% of the leachate generated from the A1 reactor during the experiment, while leachate quantity decreased by 47.3% with recirculation when compared with the aerobic dry landfill reactor.     

Seasonal variations of heavy metals in some organs of carp (Cyprinus carpio L., 1758) from Beyşehir Lake (Turkey)

In this study which was carried out between March 2003 and February 2005 Fe, Cu, Zn, Mn, Cr, Pb and Cd contents were determined in muscle, liver and gill of carp (Cyprinus carpio L., 1758) caught from Beyşehir Lake. Among the heavy metals analyzed Cr, Pb and Cd were below the detection limit (<0.03). Heavy metal concentrations varied significantly depending on the type of the tissue and season. The highest metal concentrations were found in the liver, followed by gill and muscle. Heavy metal levels in tissues of carp were increased in summer and winter, while were decreased in autumn and spring. The present study shows that precautions need to be taken in Beyşehir Lake in order to prevent heavy metal pollution that can occur in the future.