Effects of different vermicompost extracts of palm oil mill effluent and palm-pressed fiber mixture on seed germination of mung bean and its relative toxicity

Several treatment technologies are available for the treatment of palm oil mill wastes. Vermicomposting is widely recognized as efficient, eco-friendly methods for converting organic waste materials to valuable products. This study evaluates the effect of different vermicompost extracts obtained from palm oil mill effluent (POME) and palm-pressed fiber (PPF) mixtures on the germination, growth, relative toxicity, and photosynthetic pigments of mung beans (Vigna radiata) plant. POME contains valuable nutrients and can be used as a liquid fertilizer for fertigation. Mung bean seeds were sown in petri dishes irrigated with different dilutions of vermicomposted POME-PPF extracts, namely 50, 60, and 70% at varying dilutions. Results showed that at lower dilutions, the vermicompost extracts showed favorable effects on seed germination, seedling growth, and total chlorophyll content in mung bean seedlings, but at higher dilutions, they showed inhibitory effects. The carotenoid contents also decreased with increased dilutions of POME-PPF. This study recommends that the extracts could serve as a good source of fertilizer for the germination and growth enhancement of mung bean seedlings at the recommended dilutions.     

Performance of a small-scale solar-powered adsorption cooling system

In this study, an experimental investigation on the performance of a small-scale residential-size solar-driven adsorption (silica gel-water) cooling system that was constructed at Assiut University campus, Egypt is carried out. As Assiut area is considered as hot, arid climate, field tests for performance assessment of the system operation during the summer season are performed under different environmental operating conditions. The system consists of an evacuated tube with a reflective concentration parabolic surface solar-collector field with a total area of 36 m², a silica gel-water adsorption chiller of 8 kW nominal cooling capacity, and hot and cold water thermal storage tanks of 1.8 and 1.2 m³ in volume, respectively. The results of summer season field test show that under daily solar insolation varying from 21 to 27 MJ/m², the solar collectors employed in the system had high and almost constant thermal efficiency. The daily solar-collector efficiency during the period of system operation ranged from about 50% to 78%. The adsorption chiller performance shows that the chiller average daily coefficient of performance (COP) was 0.41 with the average cooling capacity of 4.4 kW when the cooling-water and chilled-water temperatures were about 31°C and 19°C, respectively. As the chiller cooling water is cooled by the cooling tower in the hot arid area, the cooling water is at a higher temperature than the design point of the chiller. Therefore, an experiment was carried out using the city water for cooling. The results show that an enhancement in the chiller COP by 40% and the chilling power by 17% has been achieved when the city water was 27.7°C.     

Utilization of Cellulosic Wastes in Textile and Garment Industries: 2. Synthesis and Characterization of Cellulose Acetate from Knitted Rag

Cellulose acetate (CA) was synthesized from knitted rag, a cellulosic waste of Textile and Garment industries, in the glacial acetic acid, and subsequently acetic anhydride (Ac₂O) in presence of concentrated H₂SO₄ reaction medium. A low to high substitution products were obtained from single step up to seven steps acetylation of cellulose. In this way, it was possible to produce low cost and different grades or substituted acetylation derivatives of cellulose. The synthesized CA was characterized and investigation of its physical characteristics was done. Solubility, acetyl content, acetic acid content, degree of substitution, and molecular weight of CA increased gradually with the increase of the number of reaction steps attaining optimum value at the fourth step. The acetyl and acetic acid content of CA were increased from 39.95 % to 44.25 %, and from 55.73 % to 61.73 % respectively. Similarly, degree of substitution and molecular weight of CA were increased from 2.47 to 2.94, and from 74,249 to 121,437 respectively.     

Source Type Evaluation of Polycyclic Aromatic Hydrocarbons (PAHs) in Surface Sediments from the Muar River and Pulau Merambong,Peninsular Malaysia

This article is the most recent report of polycyclic aromatic hydrocarbons (PAHs) in the Muar River and Pulau Merambong, Peninsular Malaysia. A total of 16 priority pollutant PAHs in addition to methylphenanthrene among alkylated PAHs were analyzed in surface sediments during May 2013. Total PAHs ranged from 212 to 440 and 151 to 412 ng g^?1 dw in sediments from the Muar River and the Pulau Merambong, respectively. The Muar River showed an increasing trend of PAH concentrations, while no previous data exist for the Pulau Merambong. Generally, mixed petrogenic and pyrogenic sources of PAHs with predominance of the latter were detected in the study area. Effective management of oil pollution has caused a drastic decrease in petrogenic sources of PAHs.     

The use of date palm as a potential adsorbent for wastewater treatment: a review

Background

In tropical countries, the palm tree is one of the most abundant and important trees. Date palm is a principal fruit grown in many regions of the world. It is abundant, locally available and effective material that could be used as an adsorbent for the removal of different pollutants from aqueous solution.

Review

This article presents a review on the role of date palm as adsorbents in the removal of unwanted materials such as acid and basic dyes, heavy metals, and phenolic compounds. Many studies on adsorption properties of various low cost adsorbent, such as agricultural waste and activated carbons based on agricultural waste have been reported in recent years.

Conclusion

Studies have shown that date palm-based adsorbents are the most promising adsorbents for removing unwanted materials. No previous review is available where researchers can get an overview of the adsorption capacities of date palm-based adsorbent used for the adsorption of different pollutants. This review provides the recent literature demonstrating the usefulness of date palm biomass-based adsorbents in the adsorption of various pollutants.     

Polar organic chemical integrative sampler (POCIS) uptake rates for 17 polar pesticides and degradation products: laboratory calibration

Polar organic chemical integrative samplers (POCIS) are useful for monitoring a wide range of chemicals, including polar pesticides, in water bodies. However, few calibration data are available, which limits the use of these samplers for time-weighted average concentration measurements in an aquatic medium. This work deals with the laboratory calibration of the pharmaceutical configuration of a polar organic chemical integrative sampler (pharm-POCIS) for calculating the sampling rates of 17 polar pesticides (1.15?≤?logK _ow?≤?3.71) commonly found in water. The experiment, conducted for 21 days in a continuous water flow-through exposure system, showed an integrative accumulation of all studied pesticides for 15 days. Three compounds (metalaxyl, azoxystrobine, and terbuthylazine) remained integrative for the 21-day experiment. The sampling rates measured ranged from 67.9 to 279 mL?day^?1 and increased with the hydrophobicity of the pesticides until reaching a plateau where no significant variation in sampling rate is observed when increasing the hydrophobicity.     

Comparative acute toxicity of two phytosanitary molecules,lambda-cyhalothrin and acetamiprid,on Nile Tilapia (Oreochromis Niloticus) juveniles

Abstract

This study aimed to compare the toxicity for fish of two active ingredients (lambda-cyhalothrin-20?g L^?1, a pyrethroid, and acetamiprid-15?g L^?1, a neonicotinoid) which are components of a commercial insecticide (Acer 35 EC) used in cotton crop in many West African countries. The juveniles of Oreochromis niloticus (4.01?±?0.34?g, mean body weight) were exposed for 96?h to increasing concentrations of active ingredients (lambda-cyhalothrin and acetamiprid) or a mixture similar to Acer 35 EC (composed by 20?g of chemical compound lambda-cyhalothrin and 15?g of acetamiprid dissolved in 1?L of acetone). The experiments were carried out under controlled conditions in aquaria according to OECD Guidelines. During the experiments, the behavioral responses (loss of balance, color change, hyperactivity, etc.) that usually precede death were observed in exposed fish. Mortalities were recorded in each aquarium and the LC₅₀-96h of each chemical was determined. The LC₅₀-96h obtained were respectively 0.1268, 0.0029, 182.9 and 0.5685?ppm for Acer 35 EC, lambda-cyhalothrin, acetamiprid and mixture. All insecticides used in this study had profound impact on Nile tilapia behavior which may confirm the neurotoxicity of each single active compound as well as of their mixture.     

Effect of Ionizing Radiation on the Morphological,Thermal and Mechanical Properties of Polyvinyl Alcohol/Polyethylene Glycol Blends

Blends of water—soluble polymers based on Poly vinyl alcohol (PVA) and Polyethylene glycol (PEG) have been prepared by the solution casting technique. The effect of various doses of γ-radiation on the structural properties of PVA/PEG polymer blends with all its compositions has been investigated. From the visual observation of all the blend compositions, it was found that, the best compatibility of the blend is up to 40% PVA/60%PEG. The structure–Property behavior of all the prepared blends before and after γ-irradiation was investigated by IR Spectroscopy, thermogravimetric analysis (TGA), mechanical properties and Scanning electron microscope (SEM). The gel content and the swelling behavior of the PVA/PEG blends were investigated. It was found that the gel content increases with increasing irradiation dose and PVA concentration in the blend. Swelling percent increased as the composition of PEG increased in the blend. The results obtained by FTIR analysis and SEM confirm the existence of possible interaction between PVA and PEG homopolymers. TGA of PVA/PEG blend, before and after γ-irradiation, showed that the unirradiated and irradiated PVA/PEG blends are more stable against thermal decomposition than pure PVA. Improvement in tensile mechanical properties of PVA/PEG blends was occurred.     

A review of medical error taxonomies: A human factors perspective

Although a large number of medical error taxonomies have been published, there is little evidence to suggest that these taxonomies have been systematically compared. This paper describes a study comparing 26 medical error taxonomies using a human factors perspective. The taxonomies were examined to determine if they classified systemic factors of medical errors and if they utilized theoretical error concepts in their classifications. Scope of classification was also examined. It was found that two-thirds of the taxonomies classified systemic factors of medical errors and only a third utilized theoretical error concepts. Medical error taxonomies based on theoretical error concepts were more likely to be generic in applicability and also more likely to classify systemic factors and psychological error mechanisms of medical errors. In addition to terminology, the medical error taxonomies also varied in terms of domain-specificity, granularity, and developmental process. Different medical error taxonomies provide different information; how these differences affect medical error management needs to be investigated.     

Application of multivariate statistical analyses in the interpretation of geochemical behaviour of uranium in phosphatic rocks in the Red Sea,Nile Valley and Western Desert,Egypt

Factor and cluster analyses as well as the Pearson correlation coefficient have been applied to geochemical data obtained from phosphorite and phosphatic rocks of Duwi Formation exposed at the Red Sea coast. Nile Valley and Western Desert. Sixty-six samples from a total of 71 collected samples were analysed for SiO2, TiO2, Al203, Fe2O3, CaO, MgO, Na2O, K2O, P2O5, Sr, U and Pb by XRF and their mineral constituents were determined by the use of XRD techniques. In addition, the natural radioactivity of the phosphatic samples due to their uranium, thorium and potassium contents was measured by gamma-spectrometry. The uranium content in the phosphate rocks with P2O5 > 15% (average of 106.6 ppm) is higher than in rocks with P2O5 < 15% (average of 35.5 ppm). Uranium distribution is essentially controlled by the variations of P2O5 and CaO, whereas it is not related to changes in SiO2, TiO2, Al2O3, Fe2O3, MgO, Na2O and K2O concentrations.-Factor analysis and the Pearson correlation coefficient revealed that uranium belaves geochemically in different ways in the phosphatic sediments and phosphorites in the Red Sea, Nile Valley and Western Desert. In the Red Sea and Western Desert phosphorites, uranium occurs mainly in oxidized U6+ state where it seems to be fixed by the phosphate ion, forming secondary uranium phosphate minerals such as phosphuranylite. In the Nile Valley phosphorites, ionic substitution of Ca2+ by U4 is the main controlling factor in the concentration of uranium in phosphate rocks. Moreover, fixation of U6- by phosphate ion and adsorption of uranium on phosphate minerals play subordinate roles.