Cell preparation methods influence Escherichia coli D21g surface chemistry and transport in saturated sand

The effect of cell preparation methods on the surface chemistry and retention of Escherichia coli D21 g was investigated over a range of ionic strength conditions. The cell preparation methods that were considered included filtration and centrifugation (at various speeds and for different durations). For a given ionic strength condition, it was found that cells prepared by filtration were more negatively charged and hydrophobic than cells prepared by centrifugation. Increasing the centrifugation speed (force imposed) or duration produced cells with a higher zeta potential (less negative) and a lower hydrophobicity. Column transport experiments for E. coli D21 g were also conducted with ultra pure quartz sand and the same solution chemistries. The first-order retention rate coefficient for E. coli D21 g increased with increasing speed and duration of centrifugation, and was lowest in the case of filtered cells. Moreover, the influence of cell preparation method was more pronounced in lower ionic strength solutions.     

Real-world in-use activity, fuel use, and emissions for nonroad construction vehicles: a case study for excavators

A study design was developed and demonstrated for deployment of a portable emission measurement system (PEMS) for excavators. Excavators are among the most commonly used vehicles in construction activities. The PEMS measured nitric oxide, carbon monoxide, hydrocarbons, carbon dioxide, and opacity-based particulate matter. Data collection, screening, processing, and analysis protocols were developed to assure data quality and to quantify variability in vehicle fuel consumption and emissions rates. The development of data collection procedures was based on securing the PEMS while avoiding disruption to normal vehicle operations. As a result of quality assurance, approximately 90% of the attempted measurements resulted in valid data. On the basis of field data collected for three excavators, an average of 50% of the total nitric oxide emissions was associated with 29% of the time of operation, during which the average engine speed and manifold absolute pressure were significantly higher than corresponding averages for all data. Mass per time emission rates during non-idle modes (i.e., moving and using bucket) were on average 7 times greater than for the idle mode. Differences in normalized average rates were influenced more by intercycle differences than intervehicle differences. This study demonstrates the importance of accounting for intercycle variability in real-world in-use emissions to develop more accurate emission inventories. The data collection and analysis methodology demonstrated here is recommended for application to more vehicles to better characterize real-world vehicle activity, fuel use, and emissions for nonroad construction equipment.     

Approaches for prevention and environmental management of novel COVID-19

Environmental Science and Pollution Research - The World Health Organization (WHO) recognized a novel coronavirus as the causative agent of a new form of pneumonia. It was subsequently named...     

Combined Effects of Physical Demands and Shift Working on Low Back Disorders Among Nursing Personnel

The aim of this study was to investigate the synergistic effects of physical demands and shift working on low back disorders (LBDs) among nursing personnel. The study used 2 questionnaires: a self-administered questionnaire composed of parts of Nordic musculoskeletal questionnaire to assess LBDs and job content questionnaire to assess physical demands. The participants were divided into 4 groups: from group 1 (low physical demands day workers) to group 4 (high physical demands shift workers). In regression analysis, high physical demands were associated with the prevalence of LBDs independently (OR 4.4, 95% CI [2.40, 8.00] and p < .05), but there was no association between shift working and LBDs (p > .05). Odds ratio in high physical demands shift workers was 9.33 compared to the reference group (p < .001). Calculated synergistic index was 7.37. Simultaneous impacts of shift working and high physical demands may increase the prevalence of LBDs among nursing personnel.     

Synthesis and characterization of ZnO decorated reduced graphene oxide (ZnO-rGO) and evaluation of its photocatalytic activity toward photodegradation of methylene blue

Environmental Science and Pollution Research - Photocatalytic treatment is one of the techniques used for the treatment of dyes-contaminated wastewater. It is important to develop an effective...     

Integrated multitrophic aquaculture (IMTA) as an environmentally friendly system for sustainable aquaculture: functionality,species, and application of biofloc technology (BFT)

Environmental Science and Pollution Research - Aquaculture is one of the fastest-growing industries in the world, and its prominent role has been proven in supplying food for the growing world...     

Assessment of major food crops production-based environmental efficiency in China,India, and Pakistan

Environmental Science and Pollution Research - Global warming and food security have led to increasing concern about agricultural crop production efficiency, especially wheat and rice farming. The...     

Optimization of COVID-19 face mask waste fibers and silica fume as a balanced mechanical ameliorator of fat clay using response surface methodology

Environmental Science and Pollution Research - The balanced amelioration of mechanical characteristics of fat clay with an additive refers to the attainment of high strength without compromising...     

Preparation and Optimization of Starch/Poly Vinyl Alcohol/ZnO Nanocomposite Films Applicable for Food Packaging

Pollution and destruction of the environment due to the accumulation of non-degradable plastics are some of the most important concerns in the world. A significant amount of this waste is related to the polymers used in food packaging. Therefore, experts in the food industry have been looking for suitable biodegradable alternatives to synthetic polymers. Preparing biocompatible and biodegradable films based on starch is a good choice. In this study, various factors affecting films of starch/polyvinyl alcohol (PVA)/containing ZnO nanoparticles such as the amount of starch, PVA, glycerol, and ZnO were evaluated by response surface methodology (RSM). Film formation by solvent casting method, mechanical properties, swelling, solubility, and water vapor permeability (WVP) were selected as responses of RSM. The results showed that hydrogen bonding interactions between polyvinyl alcohol and starch improved the film formation. The effect of glycerol and PVA content on the mechanical strength was contrary to each other. As the amount of PVA increased, the tensile strength first decreased and then increased. The value of WVP was for all Runs from 0 to 6.77?×?10^??8 g m^??1 s^??1 Pa^??1. Finally, films with high film formation, maximum tensile strength, and high elongation at break, minimum solubility, permeability, and swelling were optimized.

     

Proteomics study of Southern Punjab Pakistani cobra (Naja naja: formerly Naja naja karachiensis) venom

Because of the potential of significant geographic variation in the compositions of snake venoms, much insight can be gained by examining individuals originating from diverse locations, and detailed characterization of any species can only be done by including animals from the entire range. Pakistani N. naja (formerly N. naja karachiensis) venom was decomplexed by applying diverse techniques and found a concoction of proteins (a total of 43 venomous proteins comprising 11 super families) from 6 to 200 kilodaltons in size. Among them three finger toxins (58%), phosphoplipses A₂ (19%), snake venom metalloproteinases (5%), l-amino acid oxidases (5%), helvepryns (3%), vespryns (2%), cobra venom factor (2%), 5′-nucleotidases (2%), venom nerve growth factor (2%), and Kunitz type serine protease inhibitor (2%) were included. It is the first report that this venom possesses significantly higher percentage of three finger toxins belonging to the cytotoxins (32% overall) and α‐neurotoxins (32% overall, predominately long chain neurotoxins, 24% overall) compared to N. naja from other geographic locations. Better understanding of intraspecific variations in venom can improve the development of location-specific anti-venoms. Furthermore, this pool of diverse toxins could potentially be a source of novel drug candidates for the treatment of muscarinic acetylcholine receptors mediated nervous disorders.