How to bend down the environmental Kuznets curve: the significance of biomass energy

Sources of renewable energy have received wide attention in the literature because of serious threats to the environment. However, some renewable resources, including biomass energy role is debatable in the energy economics literature. This empirical work focuses to analyze the role of biomass energy in carbon dioxide (CO₂) emissions using the framework of the environmental Kuznets curve (EKC) in Pakistan over the period from 1980 to 2015. The bound testing approach suggests there is cointegration among study variables. The study uses an auto-regressive distributed lag model (ARDL) with a structural break in the series. To summarize the findings of the study, it can be inferred that biomass energy increase CO₂ emissions. In addition, biomass energy helps to form a U-shaped relationship between income and CO₂ emissions that support the EKC hypothesis. Also, the feedback hypothesis is found between biomass energy and CO₂ emissions. The findings would guide policymaker with practical guidelines to formulate policies to utilize a high amount of biomass energy in a sustainable manner.

     

Scandium,yttrium, and lanthanide contents in soil from Serbia and their accumulation in the mushroom Macrolepiota procera (Scop.) Singer

The mobility (fractionation) of rare earth elements (REEs) and their possible impacts on ecosystems are still relatively unknown. Soil samples were collected from two sites in central Serbia, an unpolluted mountain region (site 1) and a forest near a city (site 2). In order to investigate REE fractions (acid-soluble/exchangeable, reducible, oxidizable, and residual) in soils, BCR sequential extraction was performed. Additionally, the content of REEs was also determined in stipes and caps of the mushroom Macrolepiota procera, growing in the observed sites. Sc, Y, and lanthanide contents were determined by inductively coupled plasma mass spectrometry (ICP-MS), and results were subjected to multivariate data analysis. Application of pattern recognition technique revealed the existence of two distinguished clusters belonging to different geographical sites and determined by greater levels of Sc, Y, and lanthanides in Go? soil compared to Trstenik soil. Additionally, PCA analysis showed that REEs in soil were concentrated in two groups: the first consisted of elements belonging to light REEs and the second contained heavy REEs. These results suggest that the distribution of REEs in soils could indicate the geographical origin and type of soil. The bioconcentration factors and translocation factors for each REE were also calculated. This study provides baseline data on the rare earth element levels in the wild edible mushroom M. procera, growing in Serbia. In terms of bioconcentration and bioexclusion concept, Sc, Y, and REEs were bioexcluded in M. procera for both studied sites.

     

Nitrogen and plant population change radiation capture and utilization capacity of sunflower in semi-arid environment

The combination of nitrogen and plant population expresses the spatial distribution of crop plants. The spatial distribution influences canopy structure and development, radiation capture, accumulated intercepted radiation (Sa), radiation use efficiency (RUE), and subsequently dry matter production. We hypothesized that the sunflower crop at higher plant populations and nitrogen (N) rates would achieve early canopy cover, capture more radiant energy, utilize radiation energy more efficiently, and ultimately increase economic yield. To investigate the above hypothesis, we examined the influences of leaf area index (LAI) at different plant populations (83,333, 66,666, and 55,555 plants ha^?1) and N rates (90, 120, and 150 kg ha^?1) on radiation interception (Fi), photosynthetically active radiation (PAR) accumulation (Sa), total dry matter (TDM), achene yield (AY), and RUE of sunflower. The experimental work was conducted during 2012 and 2013 on sandy loam soil in Punjab, Pakistan. The sunflower crop captured more than 96% of incident radiant energy (mean of all treatments), 98% with a higher plant population (83,333 plants ha^?1), and 97% with higher N application (150 kg ha^?1) at the fifth harvest (60 days after sowing) during both study years. The plant population of 83,333 plants ha^?1 with 150 kg N ha^?1 ominously promoted crop, RUE, and finally productivity of sunflower (AY and TDM). Sunflower canopy (LAI) showed a very close and strong association with Fi (R ² = 0.99 in both years), PAR (R ² = 0.74 and 0.79 in 2012 and 2013, respectively), TDM (R ² = 0.97 in 2012 and 0.91 in 2013), AY (R ² = 0.95 in both years), RUE for TDM (RUE_TDM) (R ² = 0.63 and 0.71 in 2012 and 2013, respectively), and RUE for AY (RUE_AY) (R ² = 0.88 and 0.87 in 2012 and 2013, respectively). Similarly, AY (R ² = 0.73 in 2012 and 0.79 in 2013) and TDM (R ² = 0.75 in 2012 and 0.84 in 2013) indicated significant dependence on PAR accumulation of sunflower. High temperature during the flowering stage in 2013 shortened the crop maturity duration, which reduced the LAI, leaf area duration (LAD), crop growth rate (CGR), TDM, AY, Fi, Sa, and RUE of sunflower. Our results clearly revealed that RUE was enhanced as plant population and N application rates were increased and biomass assimilation in semi-arid environments varied with radiation capture capacity of sunflower.     

Optimal design of additional sampling pattern for drinking-water quality control

A crucial step in complementary studies of the water quality determination is to design the additional sampling pattern or, in other words, to determine the number and location of the additional samples. Since location and number of samples highly affect decisions’ uncertainties, and because sampling process is quite costly and time-consuming, optimization of the sampling pattern will enhance the efficiency and productivity. Solution of such an optimization problem requires defining an objective function and constraints. There exist many previous studies regarding locating additional samples in other environmental problems wherein the objective function is defined as the minimization of the kriging variance (based on the problem nature), but the point is that kriging variance is not sensitive to local variability. Since manner and extent of small-scale variations are both important and necessary in water quality studies, it is required to resolve this shortcoming of the traditional objective function. Solution is to make use of the combined variance consisting of kriging and local variances. In this study, the applicability and efficiency of the minimization of combined variance as the objective function of the additional sampling was adopted and proved for a salt marsh (east of Iran) on the basis of a simulated annealing-based algorithm. It was shown, practically, that the locational distribution of additional sampling points is quite logical and more compatible with experts’ proposed methods using this objective function (compared to the traditional one).     

Induction of apoptosis and cytokine markers in colon cancer cells by magnesium oxide (MgO) nanoparticles

Magnesium oxide nanoparticles (MgONP) are predominantly utilized in industrial products. This study was undertaken to elucidate the mechanisms underlying toxic effect of MgONP in human colon cancer (HT 29) cells over 48 hr period. Cytotoxicity was evaluated by using MTT and neutral red uptake assays. Data demonstrated that MgONP reduced cell viability in concentration- and time-dependent manner. MgONP induced oxidative stress by decreasing glutathione (GSH) concentrations and elevation of reactive oxygen species (ROS) and lipid peroxidation levels. Increased caspase-3 enzyme activity and greater condensed, damaged chromosome was observed following MgONP exposure in HT 29 cells. The level of interleukin-4 (IL-4), tumor necrosis factor (TNF-α), and DNA fragmentation were significantly higher in MgONP incubated cells. The results showed that MgONP-induced toxicity in HT 29 cells may be mediated through oxidative stress.     

Numerical modelling of the groundwater inflow to an advancing open pit mine: Kolahdarvazeh pit,Central Iran

The groundwater inflow into a mine during its life and after ceasing operations is one of the most important concerns of the mining industry. This paper presents a hydrogeological assessment of the Irankuh Zn-Pb mine at 20 km south of Esfahan and 1 km northeast of Abnil in west-Central Iran. During mine excavation, the upper impervious bed of a confined aquifer was broken and water at high-pressure flowed into an open pit mine associated with the Kolahdarvazeh deposit. The inflow rates were 6.7 and 1.4 m³/s at the maximum and minimum quantities, respectively. Permeability, storage coefficient, thickness and initial head of the fully saturated confined aquifer were 3.5?×?10^?4 m/s, 0.2, 30 m and 60 m, respectively. The hydraulic heads as a function of time were monitored at four observation wells in the vicinity of the pit over 19 weeks and at an observation well near a test well over 21 h. In addition, by measuring the rate of pumping out from the pit sump, at a constant head (usually equal to height of the pit floor), the real inflow rates to the pit were monitored. The main innovations of this work were to make comparison between numerical modelling using a finite element software called SEEP/W and actual data related to inflow and extend the applicability of the numerical model. This model was further used to estimate the hydraulic heads at the observation wells around the pit over 19 weeks during mining operations. Data from a pump-out test and observation wells were used for model calibration and verification. In order to evaluate the model efficiency, the modelling results of inflow quantity and hydraulic heads were compared to those from analytical solutions, as well as the field data. The mean percent error in relation to field data for the inflow quantity was 0.108. It varied between 1.16 and 1.46 for hydraulic head predictions, which are much lower values than the mean percent errors resulted from the analytical solutions (from 1.8 to 5.3 for inflow and from 2.16 to 3.5 for hydraulic head predictions). The analytical solutions underestimated the inflow compared to the numerical model for the time period of 2–19 weeks. The results presented in this paper can be used for developing an effective dewatering program.     

Evaluation of anthropogenic effects on water quality and bacterial diversity in Rawal Lake,Islamabad

Water quality and bacterial diversity in the surface water of Rawal Lake was investigated for a period of 8 months to evaluate the pollution load from anthropogenic effects of surrounding areas. Rawal Lake in Islamabad, Pakistan is an artificial reservoir that provides the water needs for the residents of Rawalpindi and Islamabad. Grabbed water samples were collected according to standard protocols from ten different locations of the lake and tributaries keeping in view the recharge points from adjacent areas. Temperature, pH, electrical conductivity, dissolved oxygen, total dissolved solids, hardness, alkalinity, and turbidity of water samples were determined to study the water quality characteristics. The physicochemical parameters showed higher values at the tributaries as compared to the sampling locations within the lake such as values of hardness and alkalinity were 298 and 244 mg/L, respectively, at the tributary of the Nurpur stream. Bacterial strains were isolated by streaking on differential and selective growth media by observing colony morphology and other biochemical tests such as Gram reaction, oxidase, and catalase test. Template DNA was prepared from pure cultivated bacteria and 16S rRNA gene analysis was performed using universal primers for bacteria. Sequencing was performed by using BigDye terminator cycle sequencing kit. Sequences of nearest relative microbial species were identified by using basic local alignment search tool and used as reference sequences for phylogenetic analysis. Phylogenetic trees were inferred using the neighbor-joining method. Sequencing and phylogenetic characterization of microbes showed various phylotypes, of which Firmicutes, Teobacteria, and Proteobacteria were predominant.     

Recruiting chemical grafting method for surface modification of stainless steel to fabricate a selective sorbent for solid phase microextraction of mercury metal ion

Environmental Science and Pollution Research - Keeping selectiveness and efficiency in view with solid-phase microextraction (SPME) of metal ions, this work was aimed at synthesis of a novel...     

Lead isotope ratios as tool for elucidation of chemical environment in a system of Macrolepiota procera (Scop.) Singer - soil

Environmental Science and Pollution Research - The analysis of isotope ratios of lead in the mushrooms and soil, where they were grown, assisted with a principal component analysis, offered a new...