Polychlorinated biphenyls and chlorinated pesticides in mussels from the Egyptian Red Sea coast

The residues of 17 organochlorine pollutants were analyzed in bivalve Brachiodontes sp. collected from 11 different locations in April 2000 along the Egyptian Red Sea coast. The pollutants studied were 10 individual polychlorinated biphenyl (PCB) congeners, alpha,alpha,alpha-hexachlorocyclohexane (HCHs), cyclodienes (heptachlor, heptachlorepoxide, aldrin, dieldrin) and dichlorodiphenyltrichloroethanes (DDTs) (p,p'-DDE, p,p'-DDD and p,p'-DDT). The concentration of total DDTs ranged between 125 and 772 ng/g of wet weight whereas the concentration of the PCBs, HCHs and cyclodienes ranged from 6.7 to 66.4 ng/g; 16.2 to 183.4 ng/g and 8.8 to 221.6 ng/g of wet weight, respectively. The levels are low to moderate in relation to the published data from other coastal areas. The present results indicate low to moderate PCBs and pesticides contamination in the investigated mussels except DDTs.     

Detection of organic pollutants in sandy soils via TDR and eigendecomposition

In this study, organic pollutants in sandy soils are detected using a time domain relectrometry (TDR) probe system and eigendecomposition technique. As a demonstration, four types of organic fluids (motor oil, diesel oil, methanol and ethanol) were examined. Samples were prepared with different combinations of deionized water and organic fluid contents. For each experiment, reflected signals were captured by an oscilloscope, and their characteristics were identified using eigendecomposition technique. Autoregressive modeling and singular value decomposition methods were utilized for calculating the eigenvalues. The most significant eigenvalues were then identified based on their relative magnitude. Experimental results indicated that the presented system is sensitive to both water and pore fluid organic contents. For saturated conditions, signature curves were determined for identification of organic and/or water contents in soil pore fluids.     

Anaerobic digestion of agro-industrial waste enriched with bovine bone meal for improved biogas production and biofertilization

The increase in animal and agro-industrial production must be accompanied by the development of appropriate waste and by-product management strategies. Anaerobic digestion is a promising approach to recycle these wastes and reintegrate them into the economic production cycle of biogas and biofertilizer. In order to improve the performance of the anaerobic mesophilic digestion of abundant agro-industrial wastes constituted by potato peel (PP), and poultry waste (PW) and study the contribution of bovine bone meal (BB) as additive rich in phosphorus, which can help to neutralize the acidity of the substrate. The 10-point simplex-centroid design and the isoresponse surfaces strategy were used. This study demonstrated that in mesophilic bio-digestion, the using bovine bones in admixture with agroindustrial residue provided for the proper balance of chemical components required for proliferation of microbiological agent of bioconversion, which also resulted in an increase in biogas production capacity. The best formula was so composed by 66.67% bovine bone, 16.67% potatoes peel, and 16.67% poultry waste. The stability was achieved here after only 12 days. The digestate generated from it was fulfilled with the microbiological and chemical requirements for safety defined by the NF U44-551 standard. Germination test revealed that this optimal produced digestate, did not hinder growth, in fact, almost 85% of seed was germinated. Finally, fertilization experiments prove that this digestate can boost the growth of bell pepper (Capsicum annuum).     

Impact of heavy metals of industrial plant wastewater on benthic communities of Bizerte Lagoon (Tunisia)

ABSTRACT

The aim of this study was to assess the consequences of human impact on the characteristics of sediments heavy metal concentration, grain size and its influence on the structure of the microbial and meiofaunal community assemblages. A survey was carried out in July 2013 within six sites located in the Bizerte Lagoon (Tunisia), both downstream and upstream of industrial effluents. The highest total sediment metal concentrations were detected in stations located close to the industrial sewage discharge points. In these stations, the lowest densities of the total meiofauna (33?±?13?ind/10?cm^?2) and conversely the highest densities of cultivable bacteria that are heavy metal resistant have been reported (16?±?80.34?CFU?g^?1). Univariate (ANOVA) and multivariate (MDS/CCA) analyses demonstrate high dissimilarity (0.06) in meiofaunal and bacterial community structures between downstream and upstream industrial sewages. Furthermore, canonical correspondence analysis CCA results indicated that heavy metal sediment contamination promoted bacteria that are resistant to heavy metals, while heterotrophic bacteria supported the development of meiofauna taxa. The results highlight the importance of bacteria/meiofauna interactions, as both meiofaunal and microbial communities give indications of the ecological impact of heavy metal contamination in sediment.     

Mercury contamination in selected foodstuffs and potential health risk assessment along the artisanal gold mining,Gilgit-Baltistan,Pakistan

This study investigates the mercury (Hg) contaminations in soil and foodstuffs along the artisanal gold mining areas, Gilgit-Baltistan Province, Pakistan. For this purpose, soils were analyzed for Hg concentrations and evaluated for the enrichment/contamination using enrichment factor or contamination factors (CF). The CF values ranged from 18.9 to 153 showed multifold higher levels of Hg contamination as compared to background or reference site. Foodstuffs including vegetables, seeds or grains and fish muscles showed Hg accumulation. Results revealed that Hg concentrations in foodstuffs were higher than the critical human health value set by European Union. The Hg in foodstuffs was consumed and, therefore, evaluated for the risk assessment indices using the daily intake (DI) and health risk index (HRI) for the exposed human population both children and adults. Results of this study revealed that cumulative HRI values through foodstuffs consumption were <1 (within safe limit), but if the current practices continued, then the Hg contamination could pose potential threat to exposed population in near future.     

Green technology for sustainable surface protection of steel from corrosion: a review

Plants contain substances that inhibit corrosion. Here we review biomass-based corrosion inhibitors from plant leaves, nuts, and fruit peels, after treatment with acids, bases or saline solutions. The mechanism of corrosion inhibition involves a monolayer coverage, according to isotherm and Langmuir models. Plant extract-based corrosion inhibitors contain heteroatoms whose electrons pair in the p-electron level in multiple bonds and the vacant d-orbitals of iron. Corrosion inhibition under marine conditions involves various chemical interactions between metals and dissolved ionic components.

     

The Distribution and Sources of Polycyclic Aromatic Hydrocarbons in Surface Sediments Along the Egyptian Mediterranean Coast

Coastal marine sediment samples were collected from 31 sampling stations along the Egyptian Mediterranean Sea coast. All sediment samples were analyzed to determine aliphatic and polycyclic aromatic hydrocarbons (PAHs) as well as total organic carbon (TOC) contents and grain size analysis. Total concentrations of 16 EPA-PAHs in the sediments were varied from 88 to 6338 ng g⁻¹ with an average value of 154 ng g⁻¹ (dry weight). However, the concentrations of total aliphatic were varied from 1.3 to 69.9 ng g⁻¹ with an average value of 15.6 ng g⁻¹ (dry weight). The highest contents of PAHs were found in the Eastern harbor (6338 ng g⁻¹), Manzala (5206 ng g⁻¹) and El-Jamil East (4895 ng g⁻¹) locations. Good correlations observed between a certain numbers of PAH concentrations allowed to identify its origin. The average total organic carbon (TOC) percent was varied from 0.91 to 4.54%. Higher concentration of total pyrolytic hydrocarbons (∑COMB) than total fossil hydrocarbons (∑PHE) declared that atmospheric fall-out is the significant source of PAHs to marine sediments of the Egyptian Mediterranean coast. The selected marked compounds, a principal component analysis (PCA) and special PAHs compound ratios (phenanthrene/anthracene vs fluoranthene/pyrene; ∑COMB/∑EPA-PAHs) suggest the pyrogenic origins, especially traffic exhausts, are the dominant sources of PAHs in most locations. Interferences of rather petrogenic and pyrolytic PAH contaminations were noticed in the harbors due to petroleum products deliveries and fuel combustion emissions from the ships staying alongside the quays.     

Effect of Humic Acids and Fungal Inoculations on Cesium and Lead Concentrations in Lettuce Plants Grown in Contaminated Soils

A study was carried out to evaluate the effect of humic acid additives, applied either individually or in combination with Fusarium oxysporum fungi, on uptake and translocation of cesium and lead in cultivated Lettuce (Lactuca sativa) grown on Mostorud (clayey) and El‐Gabal El‐Asfar (sandy loam soil) soils in a complete randomized block experimental design. The selected soils from contaminated areas (Mostorud soil was irrigated with contaminated industrial water for more than 30 years and El‐Gabal EL‐Asfar soil was irrigated with sewage effluent for more than 50 years). The results indicated that the cesium and lead content was reduced by all treatments of humic acid application individually or when combined with Fusarium oxysporum inoculations, especially at 200 mmol/kg compared to a control and other treatments. On the other hand, retention of cesium and lead occurred in roots more than shoots. ©2016 Wiley Periodicals, Inc.     

Cleaner production in the management of water use at a poultry slaughterhouse of Vale do Taquari,Brazil: a case study

This study included the layout characterization for the production process of a poultry slaughterhouse using qualitative and quantitative flow charts for water management; analysis of general parameters for pollution load in the wastewater produced in critical stages of the production process and assessment of environmental impact indicators. Prognoses for cleaner production based on water management were established. The diagnostic stage revealed that the scalding, pre-chilling, separated points of wastewater disposal for the wastewater treatment plant and disposal of treated and non-reused wastewater were critical for water management. Dissolved oxygen depletion and eutrophication account for the major environmental impacts of these wastewaters, resulting in an environmental pressure index of 32.1. The opportunities for cleaner production implementation resulting from this study include the reuse of wastewaters from pre-chilling and chilling for pre-washing of carcasses, since average temperatures of these wastewaters range between 4 and 16 °C. This will contribute to lowering the oil and grease pollution load. Another strategy concerns the standardization of cleaning procedures with rational water use in all work shifts and implementation of water meters on a sector-by-sector basis. In the latter case, which has already been implemented, water consumption was reduced by 13%.     

Mediterranean forests,land use and climate change: a social-ecological perspective

Regional Environmental Change - Mediterranean forests are found in the Mediterranean basin, California, the South African Cape Province, South and southwestern Australia and parts of Central Chile....