Biomechanical pulping: a mill-scale evaluation

Mechanical pulping process is electrical energy intensive and results in low paper strength. Biomechanical pulping, defined as the fungal treatment of lignocellulosic materials prior to mechanical pulping, has shown at least 30% savings in electrical energy consumption, and significant improvements in paper strength properties compared to the control at a laboratory scale. In an effort to scale-up biomechanical pulping to an industrial level, 50 tons of spruce wood chips were inoculated with the best biopulping fungus in a continuous operation and stored in the form of an outdoor chip pile for 2 weeks. The pile was ventilated with conditioned air to maintain the optimum growth temperature and moisture throughout the pile. The control and fungus-treated chips were refined through a thermomechanical pulp mill (TMP) producing lightweight coated paper. The fungal pretreatment saved 33% electrical energy and improved paper strength properties significantly compared to the control. Since biofibers were stronger than the conventional TMP fibers, we were able to reduce the amount of bleached softwood kraft pulp by at least 5% in the final product. Fungal pretreatment reduced brightness, but brightness was restored to the level of bleached control with 60% more hydrogen peroxide. The economics of biomechanical pulping look attractive.     

Waste management strategies for concrete

Recycling and reuse of waste such as building rubble, concrete lumps, etc. generated at construction and demolition sites form part of a wider, complex issue, primarily relating to improving supplies of construction material and solving problems of disposal of waste construction material. Within the framework of the sustainable development of the environment, the use of waste materials with minimum environmental impact has received much attention. The conversion of a large amount of demolished waste into an alternative resource will conserve the depleting natural resources of building materials. Demolished waste is mainly used as a non-stabilized base or sub-base in highway construction. The present paper discusses the recycling process and makes an effort to assess a safe and economic use of recycled concrete as a structural grade material for the construction industry. Extensive tests of structural properties such as compressive strength, flexural strength and split tensile strength of recycled concrete were carried out, in which cement and similarly fine aggregate were partially replaced by demolished waste to obtain recycled concrete and recycled aggregate concrete whose properties were compared with results for the conventional concrete.     

Polycentric agglomeration and haze pollution: evidence from China

Polycentric agglomeration has gradually become a salient feature of rapid growth in urbanization in China. Using province-level balanced panel data over the period 2000–18, we examine the impact of polycentric agglomeration on haze pollution and its mechanism of action. The results show that the impact of polycentric agglomeration on haze pollution exhibits a significant inverted U-shaped feature. Nevertheless, except for a few provinces where polycentric agglomeration exceeds the turning point, the degree of polycentric concentration in most provinces lies to the left of the turning point. Further, a mediating effect model illustrates that industrial structure rationalization and technological progress are effective paths through which polycentric agglomeration affects haze pollution. Finally, we demonstrate that the effect of polycentric agglomeration on haze pollution is influenced by transportation and communication infrastructure; improved transportation and communication infrastructure contributes to the haze control effect of polycentric agglomeration.

     

Correction to: Increasing water productivity,nitrogen economy,and grain yield of rice by water saving irrigation and fertilizer-N management

Environmental Science and Pollution Research - The original publication of this paper contains a mistake.     

Biochemical,hematological, and pathological related healing effects of Elaeagnus angustifolia hydroalcoholic extract in 5-fluorouracil-induced oral mucositis in male golden hamster

Oral mucositis (OM) is one of the cancer chemotherapy-related side effects which can affect the quality of life of affected patients. This study was designed to investigate the healing effect of Elaeagnus angustifolia in 5-flurouracil (5-FU)-induced OM in golden hamster. Fifty-six adult male golden hamsters received three intraperitoneal injections of 5-FU at a dose of 60 mg/kg on days 0, 5, and 10. The cheek pouch mucosa was scratched superficially under local anesthesia. Then, two horizontal scratches were made across the everted cheek pouch on days 3 and 4. All treatments were started on day 12 for equal number of animals in control group with no treatments, gel base group that was treated with carboxy methyl cellulose as gel base which used in preparation of the topical gel, topical gel group that used gel containing 10% hydroalcoholic extract of E. angustifolia (HEEA) topically, and dietary group which was treated with 300 mg/kg HEEA. At 2 and 5 days after treatment, blood and pouch tissue sampling were done and analyzed for blood composition, tissue malondialdehyde (MDA) level, and myeloperoxidase (MPO) and superoxide dismutase (SOD) activities plus histopathological evaluations. Both topically and orally HEEA-treated groups showed a significant relief in OM compared to the control and base gel groups. However, the systemic form had higher efficiency in some parts especially decreasing the MPO (0.27 ± 0.17 vs. 0.56 ± 0.17 IU/L) and increasing SOD (6.46 ± 0.15 vs. 5.36 ± 0.18 IU/L) activities in pouch tissue in comparison to topical form mostly at 5 days after treatment. It seems that hydroalcoholic extract of E. angustifolia can be used as an appropriate drug choice for the treatment of oral mucositis based on its healing stimulatory and anti-inflammatory properties.

     

Differential neuroprotective effect of curcuminoid formulations in aluminum chloride–induced Alzheimer’s disease

Environmental Science and Pollution Research - Alzheimer’s disease (AD) is a slowly progressive brain degenerative disorder which gradually impairs memory, thinking, and ability to perform...     

STREAMFLOW MODELING OF UPPER INDUS RIVER CATCHMENTS1

ABSTRACT: The streamflows of three tributaries, Siran, Haro, and Soan in the upper Indus River catchment in Pakistan were simulated using SSARR and Tank Models. Channel characteristics of the main Indus River were also determined using the two models. The basin characteristics were derived by trial and error method and were verified using the data for the period 1964–1970. Comparison of the two model performances showed that low flows were better reproduced by SSARR while the high flows were simulated with equal accuracy by both the models.     

Biosynthesis and Characterization of Poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) from Bacillus cereus S10

The biodegradable and biocompatible copolymer poly-(3-hydroxybutyrate-co-5 mol% 3-hydroxyvalerate), poly-(3HB-co-5 mol% 3HV), was synthesized by Bacillus cereus S10 and the highest yield was determined as 69.91 % at pH 7 and 30 °C after 48 h of incubation using a glucose as the sole carbon source. Poly-(3HB-co-5 mol% 3HV) was purified from bacterial biomass using chloroform. FTIR analysis showed absorption bands at 1,723, 1,274, 1,373, 1,453, 2,932 cm^?1 corresponding to C=O, C–O stretching, CH₃, –CH₂ and –CH groups, respectively. ¹H-NMR and ¹³C-NMR analysis confirmed that the copolymer was composed of 95 mol% of 3-hydroxybutrate and 5 mol% of 3-HV monomeric units. Poly-(3-HB-co-5 mol% 3HV) was used for nanoparticles preparation. The diameter of nanoparticles was 202 nm.     

Mutagenicity and genotoxicity assessment of industrial wastewaters

The genotoxicity of industrial wastewaters from Jajmau (Kanpur), was carried out by Ames Salmonella/microsome test, DNA repair-defective mutants, and Allium cepa anaphase–telophase test. Test samples showed maximum response with TA98 strain with and without metabolic activation. Amberlite resins concentrated wastewater samples were found to be more mutagenic as compared to those of liquid–liquid extracts (hexane and dichloromethane extracts). The damage in the DNA repair defective mutants in the presence of Amberlite resins concentrated water samples were found to be higher to that of liquid–liquid-extracted water samples at the dose level of 20 μl/ml culture. Among all the mutants, polA exhibited maximum decline with test samples. Mitotic index (MI) of root tip meristematic cells of A. cepa treated with 5, 10, 25, 50, and 100 % (v/v) wastewaters were significantly lower than the control. Complementary to the lower levels of MI, the wastewaters showed higher chromosomal aberration levels in all cases investigated.