Vertical distribution of <Emphasis Type="Italic">Todarodes pacificus</Emphasis> (Cephalopoda: Ommastrephidae) paralarvae near the Oki Islands,southwestern Sea of Japan

The diel vertical distribution patterns of Japanese common squid, Todarodes pacificus, paralarvae were examined using a Multiple Opening Closing Net and Environmental Sensing System (MOCNESS) in the southwest Sea of Japan near the Oki Islands (Japan) during five late-autumn surveys in 1998–2002. A total of 1,511 paralarvae ranging in mantle length (ML) from 0.7 to 7.3 mm were collected at 63 of the 68 stations surveyed. Most (84%) were collected above 75 m depth and in the mixed layer. The vertical distribution patterns varied little between day and night. Hatchling-sized (<1.0 mm ML) paralarvae were abundant at 0–25 m depth, and paralarval ML increased with increasing sampling depth. Our results suggest that T. pacificus paralarvae do not exhibit large diel vertical migration patterns, but as they increase in size, paralarvae gradually descend in the water column and the variability in depth increases with ontogeny.     

Soil characteristics under cash crop farming in upland areas of Sarawak,Malaysia

This study discusses soil fertility under perennial cash crop farming (para rubber, Hevea brasiliensis; black pepper, Piper nigrum; oil palm, Elaeis guineensis) conducted by local farmers and an oil palm estate in an upland area of Sarawak, Malaysia, in comparison with the surrounding secondary forests. In the farmlands of the local farmers, rubber farming was conducted without fertilizer application, while 2–5 t ha^?1 of NPK compounds were applied annually on pepper farms. Soils under rubber farming were acidic with poor nutrient contents, resembling soils in secondary forests. In pepper farms, soils were less acidic and showed high nutrient contents, especially with respect to available P and exchangeable Ca. This trend became stronger with increasing farming duration. Fertilizers applied around pepper vines appeared to migrate and spread across the fields. Bulk density and hardness of surface soils were higher in pepper farms than in secondary forests, indicating soil compaction due to field works. In the oil palm estate, annual fertilizer application rates were moderate at 0.4–0.8 t ha^?1 of NPK compound fertilizers. However, the soil properties in the oil palm estate were similar to those of the small-scale pepper farms. Close to the bases of the palms where fertilizers usually are applied, the contents of exchangeable Ca and available P were high. Nutrient uptake by the dense root systems of the palms seemed to prevent excessive loss of nutrients through leaching. Loss of soil organic matter and deterioration of soil physical properties were brought about by terrace bench construction, but the soils seemed to recover to some extent over time. In conclusion, technologies such as intercropping and the appropriate allocation of different crops to specific locations as well as the proper selection and dosage of fertilizers should be developed and adopted to improve fertilizer efficiency and prevent water pollution due to fertilizer wash-off from farmlands.     

Principal components derived from soil physicochemical data explained a land degradation gradient,and suggested the applicability of new indexes for estimation of soil productivity in the Sakaerat Environmental Research Station,Thailand

To find a principal component (PC) that quantifies the degree of soil degradation, we analyzed various physicochemical characteristics of soils over a land degradation gradient related to aboveground vegetation in the Sakacrat Environmental Research Station (SERS), Thailand. The aboveground vegetative types representing the degradation gradient were bare ground (BG, highly degraded), dry dipterocarp forest (DDF, moderately disturbed) and dry evergreen forest (DEF, the original vegetation). Soils under these vegetative types were sampled in February (dry season). March just after temporal precipitation) and June (rainy season) 2001. Through the period of this research, the degradation was consistently explained by sandy texture, high bulk density, lower pH, high exchangeable acidity, poor mineral and organic nutrients and dryness. Principal component analysis (PCA) was applied to determine significant principal components (PCs) that clarify the differences in soil properties between the vegetative types and between the timing of soil sampling. The PC loadings suggested that the first PC was the component that indicates total fertility of soil in the site, while the fifth PC indicates the dry to wet seasonal transition. The first PC was named the total fertility component (TFC). The linear regression between the TFC score and recently proposed indexes, the soil fertility index (SFI) or the soil evaluation factor (SEF), was highly significant (p < 0.001), indicating that the SFI and the SEF are applicable to measuring total fertility of soils in the SERS.     

Removing arsenic from groundwater in Cambodia using high performance iron adsorbent

In Cambodia, groundwater has been contaminated with arsenic, and purification of the water is an urgent issue. From 2010 to 2012, an international collaborative project between Japan and Cambodia for developing arsenic-removing technology from well water was conducted and supported by the foundation of New Energy and Industrial Technology Development Organization, Japan. Quality of well water was surveyed in Kandal, Prey Veng, and Kampong Cham Provinces, and a monitoring trial of the arsenic removal equipment using our patented amorphous iron (hydr)oxide adsorbent was performed. Of the 37 wells surveyed, arsenic concentration of 24 exceeded the Cambodian guideline value (50 μg L^?1), and those of 27 exceeded the WHO guideline for drinking water (10 μg L^?1). Levels of arsenic were extremely high in some wells (>1,000–6,000 μg L^?1), suggesting that arsenic pollution of groundwater is serious in these areas. Based on the survey results, 16 arsenic removal equipments were installed in six schools, three temples, two health centers, four private houses, and one commune office. Over 10 months of monitoring, the average arsenic concentrations of the treated water were between 0 and 10 μg L^?1 at four locations, 10–50 μg L^?1 at eight locations, and >50 μg L^?1 at four locations. The arsenic removal rate ranged in 83.1–99.7 %, with an average of 93.8 %, indicating that the arsenic removal equipment greatly lower the risk of arsenic exposure to the residents. Results of the field trial showed that As concentration of the treated water could be reduced to <10 µg L^?1 by managing the As removal equipment properly, suggesting that the amorphous iron (hydr)oxide adsorbent has high adsorbing capacity for As not only in the laboratory environment but also in the field condition. This is one of the succeeding As removal techniques that could reduce As concentration of water below the WHO guideline value for As in situ.     

Restoration of cadmium-contaminated paddy soils by washing with ferric chloride: Cd extraction mechanism and bench-scale verification

The ability of FeCl3 to extract Cd from three paddy soils was compared with that of various irons, manganese, and zinc salts to elucidate the extraction mechanism. Manganese, zinc and iron salts (including FeCl3) extracted 4-41%, 8-44% and 24-66% of total Cd, respectively. This difference reflected the pH of the extraction solution, indicating that the primary mechanism of Cd extraction by FeCl3 is proton release coupled with hydroxide generation, as iron hydroxides are insoluble. Washing with FeCl3 led to the formation of Cd-chloride complexes, enhancing Cd extraction from the soils. FeCl3 effectively extracted Cd from all of the three soils compared to HCl that is a conventional washing chemical, when the concentrations of the two washing chemicals were between 15 and 60mM(c) (at above extraction pH 2.4), while the corresponding extraction pH of FeCl3 was slightly higher than HCl. As HCl is the strong acid of complete dissociation, if excess amount of HCl was added to soil, it is possible to give the dissolution of clay minerals in soils. In contrast, proton release from FeCl3 is controlled by the chemical equilibrium of hydroxide formation. While soil fertility properties were affected by a bench-scale soil washing with 45mM(c) FeCl3, adverse effects were not crucial and could be corrected. The bench-scale test confirmed the effectiveness of FeCl3 for removal of soil Cd. The washing had no negative effect on rice yield and lowered the Cd concentration of rice grain and rice straw in a pot experiment.     

Development of active and diffusive sampling methods for determination of 3-methoxybutyl acetate in workplace air

Monitoring of the workplace concentration of 3-methoxybutyl acetate (MBA), which is used in printer's ink and thinner for screen-printing and as an organic solvent to dissolve various resins, is important for health reasons. An active and a diffusive sampling method, using a gas chromatograph equipped with a flame ionization detector, were developed for the determination of MBA in workplace air. For the active sampling method using an activated charcoal tube, the overall desorption efficiency was 101%, the overall recovery was 104%, and the recovery after 8 days of storage in a refrigerator was more than 90%. For the diffusive sampling method using the 3M 3500 organic vapor monitor, the MBA sampling rate was 19.89 cm(3) min(-1). The linear range was from 0.01 to 96.00 microg ml(-1), with a correlation coefficient of 0.999, and the detection limits of the active and diffusive samplers were 0.04 and 0.07 microg sample(-1), respectively. The geometric mean of stationary sampling and personal sampling in a screen-printing factory were 12.61 and 16.52 ppm, respectively, indicating that both methods can be used to measure MBA in workplace air.     

Distribution of Todarodes pacificus (Cephalopoda: Ommastrephidae) paralarvae near the Kuroshio off southern Kyushu, Japan

The distribution and abundance of Japanese common squid [Todarodes pacificus (Steenstrup, 1880)] paralarvae off southern Kyushu Island near the Kuroshio were examined in relation to water types in the region. Surveys were conducted in 1996 and 1997 using paired, 70 cm diameter Bongo nets. Temperature–salinity plots from 0, 50 and 100 m depths were used to assign sampling stations to three water types: inshore, mixing and Kuroshio. In total, 4103 T. pacificus paralarvae were collected at 59 of 72 stations. Catch densities at positive stations ranged between 8 and 4282 ind./50 m² sea surface area. Catches during both years were highest in mixing waters, followed by inshore and Kuroshio waters. Total catches were highest just north of the oceanographic front at the inshore edge of the Kuroshio and declined with increasing distance away from the front. Catches of paralarvae ≤1.0 mm mantle length also peaked near the front. In both years, ≥85% of all paralarvae and ≥69% of those ≤1.0 mm mantle length occurred less than 25 km from the front. We conclude that most spawning off southwest Kyushu occurs near the frontal zone, where Kuroshio and inshore waters meet. Received: 18 November 1998 / Accepted: 11 May 1999     

Dietary uptake kinetics of polychlorinated biphenyls from sediment-contaminated sandworms in a marine benthic fish (Pseudopleuronectes yokohamae)

To evaluate the dietary uptake of polychlorinated biphenyls (PCBs) from live food, we investigated the dietary uptake and depuration kinetics of PCBs in a marine benthic fish (marbled sole, Pseudopleuronectes yokohamae) by using as food live sandworms (Perinereis nuntia) that were laboratory-exposed to field-collected PCB-contaminated sediment. Marbled sole were fed the PCB-contaminated sandworms for 28 d and then uncontaminated sandworms for 56 d. The assimilation efficiencies (AEs) of 84 PCB congeners via the gastrointestinal tract (GIT) to the muscle of the fish ranged from 0.21 to 0.78; whole-body AEs would be lower than those of muscle because of the lower PCB concentrations, on a lipid basis. The AEs determined in this study were lower than those in other studies that used PCB-spiked commercial pelletized food. The lower AEs found in this study might be attributable to differences in the food administered (live sandworms vs. commercial pellet food), possibly because of low digestibility of sandworm lipids by marbled sole. In addition, the AEs in this study tended to increase with increasing log octanol-water partition coefficients (K_OW) up to about seven, although AEs in the other studies using commercial pelletized food did not increase with increasing log K_OW. This result suggests the co-transport of highly hydrophobic PCB congeners along with lipids and fatty acids from the digested sandworms into the GIT epithelium cells. The growth-corrected half-lives of 26 PCB congeners in the muscle of fish ranged from 20 to 107 d.     

Genetic Engineering of Cyanobacteria to Enhance Biohydrogen Production from Sunlight and Water

To mitigate global warming caused by burning fossil fuels, a renewable energy source available in large quantity is urgently required. We are proposing large-scale photobiological H₂ production by mariculture-raised cyanobacteria where the microbes capture part of the huge amount of solar energy received on earth’s surface and use water as the source of electrons to reduce protons. The H₂ production system is based on photosynthetic and nitrogenase activities of cyanobacteria, using uptake hydrogenase mutants that can accumulate H₂ for extended periods even in the presence of evolved O₂. This review summarizes our efforts to improve the rate of photobiological H₂ production through genetic engineering. The challenges yet to be overcome to further increase the conversion efficiency of solar energy to H₂ also are discussed.     

Use of the electrical aerosol detector as an indicator of the surface area of fine particles deposited in the lung

Because of recent concerns about the health effects of ultrafine particles and the indication that particle toxicity is related to surface area, we have been examining techniques for measuring parameters related to the surface area of fine particles, especially in the 0.003- to 0.5-microm size range. In an earlier study, we suggested that the charge attached to particles, as measured by a prototype of the Electrical Aerosol Detector (EAD, TSI Inc., Model 3070), was related to the 1.16 power of the mobility diameter. An inspection of the pattern of particle deposition in the lung as a function of particle size suggested that the EAD measurement might be a useful indicator of the surface area of particles deposited in the lung. In this study, we calculate the particle surface area (micrometer squared) deposited in the lung per cubic centimeter of air inhaled as a function of particle size using atmospheric particle size distributions measured in Minneapolis, MN, and East St. Louis, IL. The correlations of powers of the mobility diameter, Dx, were highest for X = 1.1-1.6 for the deposited surface area and for X = 1.25 with the EAD signal. This overlap suggested a correspondence between the EAD signal and the deposited surface area. The correlation coefficients of the EAD signal and particle surface area deposited in the alveolar and tracheobronchial regions of the lung for three breathing patterns are in the range of Pearson's r = 0.91-0.95 (coefficient of determination, R2 = 0.82-0.90). These statistical relationships suggest that the EAD could serve as a useful indicator of particle surface area deposited in the lung in exposure and epidemiologic studies of the human health effects of atmospheric particles and as a measure of the potential surface area dose for the characterization of occupational environments.