Utilization of UV‐A and UV‐C radiation in advanced oxidation processes with the intention of removing color and organic matter from the gross leachate of a stabilized sanitary landfill

The present work investigated color and biochemical oxygen demand (COD) removal from treated landfill leachate via advanced oxidative processes (AOPs) artificially emitted. The AOP H₂O₂/UV, TiO₂/UV, and photolysis were tested in two bench‐scale photoreactors: The first one with UV‐C lamp and the other with UV‐A lamp associated or not with coagulation / flocculation pretreatment. Crude leachate samples with pH ranging from 8 to 3 were used, and time varied in 30, 45, and 60 minutes. Experiments were performed in two stages: step 1 with a 20 mL volume from each sample and step 2 with repetition of the best results from the previous step, adopting the 150 mL volume. In step 1, the AOP applied in the crude leachate sample showed the best results, standing out H₂O₂/UV‐C with 30 minutes and TiO₂/UV‐A with 60 minutes. In step 2, H₂O₂/UV‐C had a 60% color removal and 25% COD reduction, while TiO₂/UV‐A had a 10% color removal and 20% COD reduction. Therefore, the H₂O₂/UV‐C process was the most efficient, because the complex characteristics of the effluent interfered in the TiO₂/UV‐A efficiency, but it is necessary to eliminate the process interferences. The use of artificial radiation is a viable alternative; however, it can be costly, being relevant in the associations between processes with artificial UV and solar UV, as the natural radiation becomes more attractive and allows the process operating costs reduction.     

Comparison of active and passive sampling for the determination of persistent organic pollutants (POPs) in sewage treatment plants

Semipermeable membrane devices (SPMDs) and conventional active sampling methods were used for the sampling of wastewater from the wastewater treatment plant of Thessaloniki, northern Greece. The occurrence of 22 POPs was shown by both sampling methods. The most abundant compounds were heptachlor-exo-epoxide and PCBs-52; -101 and -180. Concentrations of POPs detected by active sampling and those estimated by the SPMDs matched very well in some cases, but significant mismatches were also observed. Regression analysis of the results detected by both methods showed moderate correlations. The highest uptake rate of hydrophobic compounds by SPMDs was observed for analytes with log K(OW) between 5.5 and 6.0. Our data suggest that active and passive sampling are complimentary, and that at least for the outflow of a WWTP, SPMDs could be used for the routine monitoring of compounds that are listed at the Water Framework Directive of the European Commissions.     

Trace elements in atmospheric particulate matter over a coal burning power production area of western Macedonia, Greece

Total suspended particle (TSP) concentrations were determined in the Eordea basin (western Macedonia, Greece), an area with intensive lignite burning for power generation. The study was conducted over a one-year period (November 2000–November 2001) at 10 sites located at variable distances from the power plants. Ambient TSP samples were analyzed for 27 major, minor and trace elements. Annual means of TSP concentrations ranged between 47 ± 33 μg m⁻³ and 110 ± 50 μg m⁻³ at 9 out of the 10 sites. Only the site closest to the power stations and the lignite conveyor belts exhibited annual TSP levels (210 ± 97 μg m⁻³) exceeding the European standard (150 μg m⁻³, 80/779/EEC). Concentrations of TSP and almost all elemental components exhibited significant spatial variations; however, the elemental profiles of TSP were quite similar among all sites suggesting that they are affected by similar source types. At all sites, statistical analysis indicated insignificant (P < 0.05) seasonal variation for TSP concentrations. Some elements (Cl, As, Pb, Br, Se, S, Cd) exhibited significantly higher concentrations at certain sites during the cold period suggesting more intense emissions from traffic, domestic heating and other combustion sources. On the contrary, concentrations significantly higher in the warm period were found at other sites mainly for crustal elements (Ti, Mn, K, P, Cr, etc.) suggesting stronger influence from soil resuspension and/or fly ash in the warm months. The most enriched elements against local soil or road dust were S, Cl, Cu, As, Se, Br, Cd and Pb, whereas negligible enrichment was found for Ti, Mn, Mg, Al, Si, P, Cr. At most sites, highest concentrations of TSP and elemental components were associated with low- to moderate-speed winds favoring accumulation of emissions from local sources. Influences from the power generation were likely at those sites located closest to the power plants and mining activities.     

Occurrence and fate of heavy metals in the wastewater treatment process

The occurrence and the fate of heavy metals (Cd, Pb, Mn, Cu, Zn, Fe and Ni) during the wastewater treatment process were investigated in the wastewater treatment plant (WTP) of the city of Thessaloniki, northern Greece, operating in the activated sludge mode. For this purpose, wastewater and sludge samples were collected from six different points of the plant, namely, the influent (raw wastewater, RW), the effluent of the primary sedimentation tank (primary sedimentation effluent, PSE), the effluent of the secondary sedimentation tank (secondary sedimentation effluent, SSE), sludge from the primary sedimentation tank (primary sludge, PS), activated sludge from the recirculation stream (activated sludge, AS), and the digested/dewatered sludge (final sludge, FS).

The distribution of metals between the aqueous and the solid phase of wastewater was investigated. Good exponential correlation was found between the metal partition coefficient, logK_p, and the suspended solids concentration. The mass balance of heavy metals in the primary, secondary and the whole treatment process showed good closures for all metal species. The relative distribution of individual heavy metals in the treated effluent and the sludge streams indicated that Mn and Cu are primarily (>70%) accumulated in the sludge, while 47–63% of Cd, Cr, Pb, Fe, Ni and Zn remain in the treated effluent.