Enhancing viability of biofuel-based decentralized power projects for rural electrification in India

Decentralized power generation, using locally available biofuels from non-edible oilseeds, is an option for rural electrification in many developing countries. However, due to prevailing high price of non-edible oilseeds, such as Jatropha curcas, the cost of electricity generation is very high. This paper provides detailed financial analysis of straight vegetable oil (SVO)-based decentralized power project and proposes an innovative model for enhancing their financial viability. While for implementing agency operational cost recovery is the key for viability, affordable tariff is crucial for end-users. The paper attempts to estimate minimum desired price of electricity from the stakeholders' (producer and users) perspective using data gathered from selected operational SVO-based power generation projects in India. Analysis carried out in this paper indicates that operating the decentralized power plant at higher capacity utilization factor, by introduction of productive load, and differentiated tariffs for commercial and domestic consumers may not alone be sufficient to achieve the financial viability. The paper proposes an innovative integrated model of using biogas, obtained from the by-product de-oiled cake of non-edible oilseeds, as a feedstock for power generation, instead of using the SVO in engines. This reduces the fuel cost of power generation, thereby helping to bring down the tariff within the paying capacity of rural consumers. The main produce, viz. extracted non-edible oil, which was otherwise used as fuel for generating power, can be sold in local market for earning revenue, thereby enhancing the project’s economic viability. This paper sets forth the proposed integrated model as a viable biofuel-based decentralized power project for sustainable rural development in areas with adequate availability of oilseeds.     

Kinetics of degradation of carbendazim by B. subtilis strains: possibility of in situ detoxification

Food safety is a global concern due to the increased use of pesticides in agriculture. In grapes, carbendazim is one of the frequently detected fungicides. However, it is amenable to biodegradation. In this study, we aimed to assess the degradation of carbendazim by four Bacillus subtilis strains, which had earlier shown potential for biocontrol of grape diseases. In liquid medium, each of the four strains, namely, DR-39, CS-126, TL-171, and TS-204, could utilize carbendazim as the sole carbon source. The half-life was minimized from 8.4 days in the uninoculated spiked control to 4.0–6.2 days by the four strains. In Thompson Seedless sprayed with carbendazim at 1.0 g L^?1, the residue on grape berries in control was 0.44 mg kg^?1 after 25 days of application, whereas in grapes treated with the four B. subtilis strains, the residues had decreased to 0.02 mg kg^?1. The degradation kinetics showed low half-lives of 3.1 to 5.2 days in treated grapes as compared to 8.8 days in control. In inoculated soils, the half-lives were 5.9 to 7.6 days in autoclaved and 6.5 to 7.2 days in nonautoclaved soils as compared to 8.2 and 8.0 days in respective controls. The growth dynamics of these strains in all the three matrices was not affected by presence of carbendazim. Bacillus strains TS-204 and TL-171 showed higher degradation rate than the other two strains in all the three matrices and show promise for in situ biodegradation of carbendazim.     

Energy pricing and groundwater use

The current policy of many state governments in India to supply cheap and subsidized power to farmers for irrigation pumping is being increasingly questioned by many environmentalists and agriculturalists. States where power tariffs for irrigation are subsidized and cheap have seen a fall in their groundwater tables which could threaten the long-term sustainability of irrigated agriculture in these areas. This paper presents the results of a survey, undertaken to understand the effect of energy pricing on groundwater tables. The paper argues that current energy pricing policies are at cross purposes to groundwater conservation. Equity effects of energy pricing for irrigation pumping is also discussed .     

Ecofriendly approach of urban solid waste management: a case study of Jalgaon city, Maharashtra

In India, the traditional methods are used for urban solid waste management. These practices are associated with degradation of the urban environment Hence, an environmentally sound garbage management system is required for the urban waste management. The concept of waste minimization needs to be adopted in such systems. It is possible to implement certain corrective measures at collection, storage, transport and disposal of urban solid waste to minimize the adverse impacts on the environment The present investigations are emphasized on generation, characterzation and ecofriendly disposal of solid waste generated in Jalgaon city, Maharashtra. In the present study the waste generation at source was studied in the various income groups of the city. The per capita waste generation was studied by sampling the waste directly from the source of generation. The study reveals that the waste generation is large in the high-income group followed by middle and low-income group public. Further the physicochemical characterization of the waste was also studied. The data generated will help to develop environmentally sound and economically feasible solid waste management system for Ihe city.     

Distribution of heavy metals in sediment and water of river Gomti

Gomti river receives industrial as well as domestic wastes from various drains of Lucknow city. In the process the water and sediment of the river Gomti get contaminated with heavy metals and other pollutants. In the present study, impacts of domestic/industrial wastes on the water and sediment chemistry of river Gomti with special reference to heavy metals have been investigated in different seasons (summer, winter and rainy). For this, seven sampling sites: Gaughat, Mohan Meakin, Martyrs Memorial, Hanuman Setu, Nishatganj bridge, Pipraghat and Malhaur, in the river Gomti in Lucknow region were identified and samples of water and sediments were collected in all the three seasons. In the collected water and sediment samples, six metals (Cd, Cr, Cu, Ni, Pb, and Zn) were analyzed on ICP-AES (Inductively coupled plasma emission spectroscopy) Labtam Plasmalab 8440. High concentrations of all the metals were noticed in water and sediment in rainy season compared to summer and winter. Because in rainy season runoff from open contaminated sites, agricultural field and industries, directly comes into the river without any treatment. In both the cases, the concentration of zinc was maximum (0.091 g/ml in water and 182.13 g/g in sediment) and the concentration of cadmium (0.001 g/ml in water and 17.26 g/g in sediment) was minimum. Higher concentration of metal in water and sediment during rainy season could be due to the industrial/agricultural/domestic runoff coming into the river.     

Municipal landfills exhale newly formed organotins

For the first time we are able to report the identification and quantification of several unexpected alkylated tin compounds such as dimethyldiethyltin, trimethylethyltin and propyltrimethyltin in European municipal waste deposits, by using GC-ICP-MS. Future studies will reveal whether their origin is from the degradation of butyl-, or octyltin compounds or simply products of de novo synthesis within the landfill environment.     

Bricks as historical record of heavy metals fallout: Study on copper accumulation in Agra soils since 1910

Peat, ice deposits and aquatic sediments, which have been used as a geochemical monitor of atmospheric heavy metal pollution until now, are open and dynamic systems and can be easily affected by climatic variations. In contrast, bricks, which are more compact, can act as a better geochemical monitor. Analysis of Cu, Cr, Ni, Pb and Zn in scores of soil and brick (baked/unbaked) samples, collected from a large area in and around a rapidly growing Indian city, Agra, reveals approximately similar concentrations in soils and bricks, thereby showing insignificant fractionation of these metals during brick making. Further, metals concentration in the core of bricks remains unaffected by any significant amount of acidic and alkaline rain. Thus, the feasibility of a novel role of bricks as a geochemical monitor of atmospheric heavy metal pollution has been tested. Utilizing this concept, an attempt has also been made to trace the history of atmospheric copper depositions in the soils of Agra during the last 100 years.     

Reactive Compatibilization of Biobased Polyurethane Prepolymer Toughening Polylactide Prepared by Melt Blending

Polylactide (PLA) is a major biodegradable polymer, which has received extensive interests over the past decades and holds great potential to replace several petroleum-based polymeric materials. Nevertheless, the inherent brittleness and low impact strength have restricted its invasion to niche markets. In this paper, the authors demonstrate that the entirely bio-sourced blends, namely PLA and castor oil-based polyurethane prepolymer (COPUP), were first melt-compounded in an effort to prepare novel biodegradable materials with an excellent balance of properties. NCO-terminated COPUP was successfully synthesized and subsequently mixed with variable concentration of PLA matrix using melt-compounded by twin-screw extrusion technique. The miscibility, phase morphology, mechanical properties, and thermal resistance of the blends were investigated. During FTIR analysis, it suggests that the interfacial compatibilization between COPUP and PLA phase occurred by the reaction of –NCO group of MDI with terminal hydroxyl group of PLA. DMA analysis showed that COPUP and PLA showed some limited miscibility with shifted glass transition temperature. The morphologies of fracture surface showed a brittle-to-ductile transition owing by the addition of COPUP. The crystallization behavior was studied by differential scanning calorimeter (DSC). The strain at break and notched impact strength of PLA/COPUP blends were increased more than 112–15.4 times elegant of neat PLA; the increase is superior to previous toughening effect by using petroleum-based tougheners. Furthermore, the thermal resistances and melt flow properties of the materials were also examined by analysis of the melt flow index and heat deflection temperature use in the work. With enhanced toughness, the PLA/COPUP blends could be used as replacements for some traditional petroleum-based polymeric materials.     

Changing scenario of municipal solid waste management in Kanpur city,India

Journal of Material Cycles and Waste Management - Generation of municipal solid waste (MSW) depends upon lifestyle, urbanization and income level of population. Solid waste management is one of the...