山东半岛城市群人居环境质量综合评价

随着中国城市化的高速发展,"城市病"问题日益突出,城市群作为统筹区域协调发展、建设宜居人居环境的重点地区,其人居环境发展状况备受关注。基于此,本文以山东半岛城市群为例,从人文环境、经济环境、社会环境和生态环境4个方面构建人居环境质量综合评价指标体系,利用人居环境质量计算模型和系统协调度模型,对其人居环境质量进行静态定量化评价和动态综合性评价。研究表明:(1)山东半岛城市群人居环境质量与社会环境的关联性最大,经济实力、基础设施水平时空发展不均衡、地域差异大,是制约山东半岛城市群人居环境发展的突出问题。(2)2000—2014年山东半岛城市群人居环境综合水平呈现良好的上升趋势,且增速较稳,增幅较小;各要素间的协调性均达到了中级协调等级;系统层的评价值除人文环境外,均呈现不同程度的波动式上升态势;领域层的评价值差异明显,发展不均衡。(3)城市群内部各城市人居环境综合质量水平逐步提高,且排名相对稳定;各要素间的协调度等级差异较小,但起伏变化较大;人居环境质量时空分异特征明显,呈现东西高、中间低的格局,内部级别差异显著,可分为较好、一般、较差、差4个等级。在今后的发展中,应针对山东半岛不同城市人居环境问题采取因时因地制宜的协调对策,创造整体最优人居环境。不仅要提高城市群的整体经济水平,提升城市群的短板建设,推动人居环境协调发展,还要符合新常态下城市发展与建设的要求,加快山东半岛城市群的区域创新体系构建,科学引领产业转型升级,优化产业结构,加强山东半岛城市规划研究与实施力度,探索"多规合一"模式。     

基于遥感反演长江中游地区悬浮泥沙研究

悬浮泥沙定量研究对于调查长江的水质、地貌、生态环境等起着至关重要的作用。以长江中游武汉地区2012~2013年14幅不同时相的Landsat ETM+遥感影像为主要数据源,结合野外采样悬浮泥沙浓度数据,分析了悬浮泥沙遥感定量反演方法,数据处理中针对ETM+SLC OFF影像缝隙问题,采用自适应局部回归匹配算法（ALR）进行影像自动恢复处理,在波段选择中对悬浮泥沙浓度和光谱反射率数据进行相关性分析,并运用传统关系建模方法和高斯模型方法对比,比较悬浮泥沙定量反演模型,利用实测验证数据对反演模型精度进行评估。研究结果表明：（1）ALR可以有效的获取悬浮泥沙敏感波段的遥感光谱反射率;（2）ETM+Band3悬浮泥沙浓度的高斯模型相关系数最高,通过对比得到模型反演的验证精度较高,研究证明遥感定量反演适合于长江流域武汉段泥沙含量大范围监测     

基于MODIS数据的安徽区域日蒸散量估算与分析

蒸散的估算在区域能量平衡和水资源研究中具有重要意义,遥感技术发展促进了区域蒸散的研究。利用安徽省气象资料、MODIS数据产品及GIS背景信息,基于SEBAL模型,按1 km空间分辨率进行了面尺度的安徽省日蒸散量估算,并在GIS空间分析模块的支持下对不同土地覆盖类型的日蒸散量进行统计分析。结果表明：遥感估算的蒸散量与利用Penman Monteith公式计算的蒸散量比较,两者之间具有较好的相关性,遥感蒸散估算值整体偏小,不同土地利用类型的日蒸散量间差异显著。遥感蒸散估算方法在安徽省具有一定的实用性,需优化模型参数,以提高其进一步技术推广的前景     

Composition and quantification of the anthropogenic and natural fractions of wastes collected from the stormwater drainage system for discussions about the waste management and people behavior

A study was made of the composition of wastes collected from the pipes of the stormwater drainage system of Sorocaba, SP, Brazil (600 thousand inhabitants). A total of 10 samples weighing at least 100 kg each were sorted into 19 items to determine the fraction that can be considered natural (earth/sand, stones, organic matter, and water, the latter determined after oven-drying the samples) and the anthropogenic fraction (the remaining 15 items, especially construction and demolition wastes and packaging). Soil/sand was found to be the main item collected (52.5 % dry weight), followed by the water soaked into the waste (24.3 %), which meant that all the other wastes were saturated in mud, whose contents varied from 6.4 % (glass) to 87.2 % (metalized plastics packaging). In general, 83 % of the collected wastes can be classified as “natural,” but the remaining 17 % represent 2,000 kg of the most varied types of wastes discarded improperly every day on the streets of the city. This is an alarming amount of wastes that may clog parts of the drainage systems, causing troubles for all the population (like flooding) and must be strongly considered in municipal solid wastes management and in environmental education programs.     

Evaluation of heavy metal content in digestate from batch anaerobic co-digestion of sunflower hulls and poultry manure

In this experimental study, the biogas digestate from mesophilic batch anaerobic co-digestion of poultry manure and an agricultural residue, sunflower hulls, was characterized, particularly in terms of heavy metal content, in order to evaluate whether the biogas digestate was suitable for land applications. Ni, Zn, Cu, Pb, Cr, Cd, and Hg were detected in the biogas digestate in each trial, however, their concentrations were always lower than the limit values stated in Turkish regulations. The main source of heavy metals in the biogas digestate seemed to be the poultry manure, not the agricultural residue. The commercial feedstuffs that are frequently supplemented with various essential elements to promote optimum nutrient supply and optimum growth rates may have contributed to heavy metals presence in the biogas digestate. The results indicated that the biogas digestate from anaerobic co-digestion of manure and agricultural residue could be utilized as fertilizer in agricultural applications.     

Advances in the recycling of plastic wastes for metallurgical coke production

This paper aims to provide useful knowledge on the use of plastic wastes as additives to coking blends for the production of metallurgical coke. It focuses on the influence that the composition of plastic wastes has upon the development of coal fluidity, the generation of pressure during the coking process and the quality of the cokes produced in a semipilot oven. Several plastic mixtures of two types of thermoplastics, polyolefins (HDPE, LDPE and PP) and aromatic polymers such as PET, were used. The overall addition rate of plastics to a medium-fluid coal blend was 2 wt%. It is shown that polyolefins, weaker modifiers of coal fluidity, may be employed to maintain coke quality but that they have a negative effect on the generation of coking pressure, while plastics of the aromatic type such as PET, a strong modifier of coal fluidity, can be used to counteract the generation of coking pressure. From the results, it is deduced that the protocol developed is useful for determining the optimum amount of each type of polymer (polyolefins and aromatic polymers) that is needed in order to counteract the generation of pressure during the coking process and to maintain the quality of the cokes.     

Physical Properties, Photo- and Bio-degradation of Baked Foams Based on Cassava Starch, Sugarcane Bagasse Fibers and Montmorillonite

The objectives of this work were to develop biodegradable trays from cassava starch, sugarcane fibers and Na-montmorillonite (Na-MMT) using a baking process and to study the effects of these components on the physical properties, photo- and bio-degradation of the trays. The sample F20 (produced with 20 g fiber/100 g formulation) showed the maximum yield production (100 %). All formulations resulted in well-shaped trays with densities between 0.1941 and 0.2966 g/cm³. The addition of fibers and Na-MMT resulted in less dense and less rigid trays compared to control samples (only starch). The studied processing conditions resulted in good nanoclay dispersion, leading to the formation of an exfoliated structure. The evaluation of the photo-degradation stability of the trays under UV exposure for 336 h showed that a sample produced with a specific combination of fiber and nanoclay (20 g fiber and 5 g nanoclay/100 g formulation) had the highest loss in stress at break (91 %). Biodegradation assays showed that Control trays (starch) and F20 (20 g fiber/100 g formulation) lost a greater percentage of their weight after 90 days of incubation in soil, with losses of up to 85.50 and 82.70 %, respectively.     

Preparation and Characterization of Three Different Derivatized Potato Starches

The use of native starch as a thermoplastic polymer is limited by its fragility and high water absorption. Due to the presence of several hydroxyl groups in its structure, water acts as a natural plasticizer of starch, modifying its properties. It is necessary to chemically modify starch molecules by replacing hydroxyl groups with other functional groups to reduce water absorption. Chemical modification of starch granules also alters its swelling and gelatinization behavior. In this contribution we describe the chemical modification of starch and its influence on its hydrophilicity and heat resistance. Acetic acid, maleic anhydride and octanoyl chloride were used as derivatizing reagents. The effectiveness of the treatments was evaluated by means of infrared spectroscopy. Different tests were conducted in order to evaluate the influence of the different chemical modifications on starch structure and properties. Results showed that the treatments effectively reduced starch moisture susceptibility, while substantially altering other properties such as amylose content, swelling power, solubility, and heat resistance. Finally, films were prepared from native and derivatized starch and their surface polarity was evaluated.     

报废汽车拆解利用循环产业链建设的初步探讨

在分析我国报废汽车拆解与利用行业的发展现状、存在问题和严峻的环境影响基础上,依据循环经济的理念,吸取发达国家经验,并结合中国国情,对建立报废汽车拆解与利用循环产业模式进行了初步探讨,并对于汽车拆解与利用循环产业链的建设提出了相关建议.     

Developmental toxicity of PAH mixtures in fish early life stages. Part II: adverse effects in Japanese medaka

In aquatic environments, polycyclic aromatic hydrocarbons (PAHs) mostly occur as complex mixtures, for which risk assessment remains problematic. To better understand the effects of PAH mixture toxicity on fish early life stages, this study compared the developmental toxicity of three PAH complex mixtures. These mixtures were extracted from a PAH-contaminated sediment (Seine estuary, France) and two oils (Arabian Light and Erika). For each fraction, artificial sediment was spiked at three different environmental concentrations roughly equivalent to 0.5, 4, and 10 μg total PAH g^?1 dw. Japanese medaka embryos were incubated on these PAH-spiked sediments throughout their development, right up until hatching. Several endpoints were recorded at different developmental stages, including acute endpoints, morphological abnormalities, larvae locomotion, and genotoxicity (comet and micronucleus assays). The three PAH fractions delayed hatching, induced developmental abnormalities, disrupted larvae swimming activity, and damaged DNA at environmental concentrations. Differences in toxicity levels, likely related to differences in PAH proportions, were highlighted between fractions. The Arabian Light and Erika petrogenic fractions, containing a high proportion of alkylated PAHs and low molecular weight PAHs, were more toxic to Japanese medaka early life stages than the pyrolytic fraction. This was not supported by the toxic equivalency approach, which appeared unsuitable for assessing the toxicity of the three PAH fractions to fish early life stages. This study highlights the potential risks posed by environmental mixtures of alkylated and low molecular weight PAHs to early stages of fish development.