The objective of the experimental work described in this paper is the study of the separation of PS (polystyrene) from PET (polyethylene terephthalate) and PVC (polyvinyl chloride) from drop-off points using a fluidized bed separator. This is a low-cost process commonly used in the hydro-classification of mineral ores. Firstly, experimental tests were carried out with artificial granulated samples with different grain sizes, types and sources of plastic ("separability tests"). The particle settling velocities were determined under different operating conditions. Then, based on the results, the laboratory tests continued with real mixtures of waste plastics ("separation tests") and the efficiency of the process was evaluated. From a PET-rich mixture, a concentrate of PS with a 75% grade in PS was produced while the underflow was quite clear from PS (grade less than 0.5% in PS). 相似文献
The content of heavy metals is the major limitation to the application of sewage sludge in soil. However, assessment of the pollution by total metal determination does not reveal the true environmental impact. It is necessary to apply sequential extraction techniques to obtain suitable information about their bioavailability or toxicity. In this paper, sequential extraction of metals from sludge before and after aerobic digestion was applied to sludge from five WWTPs in southern Spain to obtain information about the influence of the digestion treatment in the concentration of the metals. The percentage of each metal as residual, oxidizable, reducible and exchangeable form was calculated. For this purpose, sludge samples were collected from two different points of the plants, namely, sludge from the mixture (primary and secondary sludge) tank (mixed sludge, MS) and the digested-dewatered sludge (final sludge, FS). Heavy metals, Al, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Ti and Zn, were extracted following the sequential extraction scheme proposed by the Standards, Measurements and Testing Programme of the European Commission and determined by inductively-coupled plasma atomic emission spectrometry. The total concentration of heavy metals in the measured sludge samples did not exceed the limits set out by European legislation and were mainly associated with the two less-available fractions (27-28% as oxidizable metal and 44-50% as residual metal). However, metals as Co (64% in MS and 52% in FS samples), Mn (82% in MS and 79% in FS), Ni (32% in MS and 26% in FS) and Zn (79% in MS and 62% in FS) were present at important percentages as available forms. In addition, results showed a clear increase of the concentration of metals after sludge treatment in the proportion of two less-available fractions (oxidizable and residual metal). 相似文献
The influence of the colonization of salt marsh sediments with Halimione portulacoides was evaluated by analysing the fluorescent dissolved organic matter (FDOM) in sediment pore waters from a salt marsh at different depths. Cores of sediments at colonized and non-colonized sites were collected from a coastal lagoon (Ria de Aveiro, Portugal). The DOC content of extracted pore waters was determined and characterized by synchronous molecular fluorescence (Deltalambda=60nm) and UV-visible spectroscopies. The common practice of freezing sediment cores for further and later chemical investigation was shown not to be an appropriate methodology of sample preservation. On the contrary, freezing of extracted and filtered pore water seemed not to affect either the DOC content or the fluorescence properties of pore waters. Two types of fluorescent substances were found in the pore waters spectra; one corresponding to humic-like substances and another one resembling proteins. However, major differences were found in the spectra of pore waters depending on both depth and the presence/absence of vegetation colonization. 相似文献
Oils and grease (O&G) have low affinity for water and represent a class of pollutants present in the dairy industry. Enzyme-mediated bioremediation using biocatalysts, such as lipases, has shown promising potential in biotechnology, as they are versatile catalysts with high enantioselectivity and regioselectivity and easy availability, being considered a clean technology (white biotechnology). Specially in the treatment of effluents from dairy industries, these enzymes are of particular importance as they specifically hydrolyze O&G. In this context, the objective of this work is to prospect filamentous fungi with the ability to synthesize lipases for application in a high-fat dairy wastewater environment. We identified and characterized the fungal species Aspergillus sclerotiorum as a good lipase producer. Specifically, we observed highest lipolytic activity (20.72 U g−1) after 96 h of fermentation using sunflower seed as substrate. The fungal solid fermented was used in the bioremediation in dairy effluent to reduce O&G. The experiment was done in kinetic from 24 to 168 h and reduced over 90% of the O&G present in the sample after 168 h. Collectively, our work demonstrated the efficiency and applicability of fungal fermented solids in bioremediation and how this process can contribute to a more sustainable wastewater pretreatment, reducing the generation of effluents produced by dairy industries.
Wood resources are often used to support the needs of the local population. In order to protect biodiversity and resources,
conservation strategies need to consider what types of wood use have the strongest impacts on forested areas. This study aimed
to identify the use categories that put higher pressure on an Atlantic forest region located in the municipality of Igarassu
in Pernambuco, northeastern Brazil. To conduct the study, we measured the volume of all wood products in 62 surveyed residences
and registered the average replacement time for such products. The fuelwood category was most important locally and accounted
for 92% of annual wood consumption. However, the construction category harvests more destructively and concentrates on the
consumption of a few wood species. Therefore we recommend the fuelwood category to be the main focus of conservation effforts.
In addition, the most important species for construction purposes (e.g., Eschweilera ovata (Cambess.) Miers, Apuleia leiocarpa (Vogel) J.F. Macbr. and Pogonophora schomburgkiana Miers ex Benth) should also be considered as a priority for conservation. 相似文献