Soil-plant nitrogen isotope composition and nitrogen cycling after biochar applications

Environmental Science and Pollution Research - Biochar has strong potential to improve nitrogen (N) use efficiency in both agricultural and horticultural systems. Biochar is usually co-applied with...     

Efficacy of vegetated buffer strips for retaining Cryptosporidium parvum

Overland and shallow subsurface hydrologic transport of pathogenic Cryptosporidium parvum oocysts from cattle feces into surface drinking water supplies is a major concern on annual grasslands in California's central and southern Sierra Nevada foothills. Soil boxes (0.5 m wide x 1.1 m long x 0.3 m deep) were used to evaluate the ability of grass vegetated buffer strips to retain 2 x 10(8) spiked C. parvum oocysts in 200-g fecal deposits during simulated rainfall intensities of 30 to 47.5 mm/h over 2 h. Buffers were comprised of Ahwahnee sandy loam (coarse-loamy, mixed, active, thermic Mollic Haploxeralfs; 78:18:4 sand to silt to clay ratio; dry bulk density = 1.4 g/cm(3)) set at 5 to 20% land slope, and >/=95% grass cover (grass stubble height = 10 cm; biomass = 900 kg/ha dry weight). Total number of oocysts discharged from each soil box (combined overland and subsurface flow) during the 120-min simulation ranged from 1.5 x 10(6) to 23.9 x 10(6) oocysts. Observed overall mean log(10) reduction of total C. parvum flux per meter of vegetated buffer was 1.44, 1.19, and 1.18 for buffers at 5, 12, and 20% land slope, respectively. Rainfall application rate (mm/h) was strongly associated with oocyst flux from these vegetated buffers, resulting in a decrease of 2 to 4% in the log(10) reduction per meter buffer for every additional mm/h applied to the soil box. These results support the use of strategically placed vegetated buffers as one of several management strategies that can reduce the risk of waterborne C. parvum attributable to extensive cattle grazing on annual grassland watersheds.     

Influence of x-ray diffraction sample preparation on quantitative mineralogy: implications for chromate waste treatment

Powders of chromite ore processing residue (COPR) were mineralogically evaluated using quantitative X-ray powder diffraction (XRPD) to illustrate the impacts of sample preparation procedures. Chromite ore processing residue is strongly alkaline, reactive, contains minerals of varying hardness and absorption coefficients, and exhibits significant amorphicity. This poses a challenge to produce powders for XRPD analysis that are sufficiently fine and of uniform particle size while avoiding mineral reactions and overgrinding effects. Dry, hand pulverization to different grain sizes, and wet, mechanical pulverization (micromilling) using four milling liquids (cyclohexane, isopropanol, ethanol, and water), and variable milling durations (up to 15 min) were evaluated. Micromilling with a light, nonpolar, highly evaporative liquid such as cyclohexane with a milling time of 5 min mitigated systematic errors such as microabsorption and preferred orientation as it produced finer and more uniform particle size distributions than the hand-pulverized powders, while simultaneously affording the least time for sample preparation. Conversely, the use of water as milling liquid resulted in extensive hydration reactions during sample preparation, causing mischaracterization and significant underestimation of its reactive brownmillerite content, which can complicate the remediation design process for COPR. Hand pulverization emerged as a necessary complement to quantify Cr(VI)-containing, softer minerals destroyed during mechanical milling, the quantification of which has also important implications for COPR treatment design. The findings of this study may be applicable in a variety of geochemically complicated and reactive environmental media (metal-contaminated soils, stabilized/solidified media, inorganic waste), and points to the importance of the sample preparation method to obtain reliable quantitative XRPD results.     

Ecosystem restoration in fire-managed savanna woodlands: Effects on biodiversity,local livelihoods and fire intensity

Ethiopia aims to restore 15 million ha degraded forests and woodlands, but effects on the potentially contrasting goals of long-term carbon storage, biodiversity and sustainable livelihoods are unknown. To quantify the effects of grazing exclusion on vegetation and fire behaviour, we established six 30 × 30 m fenced exclosures with grazed controls, in a mesic wooded savanna. Experimental burns were done after 1.5 years. Tree seedlings were few but more common inside fences. Field layer cover and biomass increased inside fences, and grass species increased in numbers and cover. Fire intensity was higher inside fences, killing shrubs and saplings but not mature trees. Interviews confirmed that overgrazing has resulted in “cool fires”, causing shrub encroachment. High-intensity fires occurred in the 1980s after a zoonotic disease killed most livestock. Short-term increase in carbon storage through fire and grazing exclusion may lead to loss of pasture, and in the long-term increased wildfire risk.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01343-7) contains supplementary material, which is available to authorized users.     

Prevalence of chromosomal aberrations in Argentinean agricultural workers

Environmental Science and Pollution Research - Little is known about biosecurity measures and toxic effects during pesticide application in the province of Jujuy, Argentina, particularly concerning...     

Assessing strategies to mitigate phosphorus leaching from drained clay soils

Assessing mitigation of phosphorus (P) leaching from subsurface drainage systems is challenging due to high spatial and temporal variation in leaching. Mean measured total P leaching from a clayey soil in an eight-year study period (four replicates per treatment) was (kg ha^?1 year^?1): 1.21 from shallow autumn tillage (ShT), 0.84 from unfertilised fallow (UF), 0.81 from conventional autumn ploughing (CT) and 0.57 from structure liming (SL–CT). Treatment was not significant using Richards–Baker flow index or a distance factor as covariate (p = 0.084 and 0.057). A tendency for lower leaching was obtained comparing SL-CT with ShT (p _adjusted = 0.060 and 0.009 respectively). A combination of measures adapted to drainage conditions and clay content in different parts of the field is proposed since P leaching was approximately halved from an adjacent field (4.3 ha) in a three-year post-period compared with a three-year pre-period for structure liming the entire field and drainage system renovation plus structure lime drain backfilling.     

An Assessment of Oil Pollution in the Coastal Zone of Patagonia,Argentina

The Patagonian coast is considered a relatively pristine environment. However, studies conducted along coastal Patagonia have showed hydrocarbon pollution mostly concentrated at ports that have fishing, oil loading, general merchant, and/or tourist activities. A high value of total aliphatic hydrocarbons (TAH) was found at the Rawson fishing port (741 μg/g dw). In other ports with and without petroleum-related activities, hydrocarbon values were approximately 100 μg/g dw. The highest values for TAH and total aromatic hydrocarbons (TArH) were found in Faro Aristizábal, north of San Jorge gulf (1304 and 737 μg/g dw, respectively). This is very likely the result of petroleum-related activities at the Comodoro Rivadavia, Caleta Cordova, and Caleta Olivia ports located within this gulf. In other coastal areas away from potential anthropogenic sources, hydrocarbon values were less than 2 and 3 μg/g dw for TAH and TArH, respectively. This review of published and unpublished information suggests that ports are important oil pollution sources in the Patagonian coast. More detailed studies are needed to evaluate the area affected by port activities, to understand the mechanisms of hydrocarbon distribution in surrounding environments, and to assess bioaccumulation in marine organisms. Despite that some regulations exist to control oil pollution derived from port and docked vessel activities, new and stricter management guidelines should be implemented.     

Blending Linz–Donawitz and Blast Furnace slags with the Kambara reactor byproduct to improve their reuse in roadworks

Journal of Material Cycles and Waste Management - The use of industrial byproducts as replacement of natural aggregates has been extensively investigated to design eco-friendly roads. One of the...     

Observations on the workshop as a means of improving communication between holders of traditional and scientific knowledge

Traditional ecological knowledge (TEK) and the information and insights it offers to natural resource research and management have been given much attention in recent years. On the practical question of how TEK is accessed and used together with scientific knowledge, most work to date has examined documentation and methods of recording and disseminating information. Relatively little has been done regarding exchanges between scientific and traditional knowledge. This paper examines three workshop settings in which such exchanges were intended outcomes. The Barrow Symposium on Sea Ice, the Exxon Valdez Oil Spill Restoration Program Synthesis/Information Workshops, and the Alaska Beluga Whale Committee illuminate certain features of the preparation, format, and context of workshops or series of workshops and their eventual outcomes and influence. The examples show the importance of long-term relationships among participants and thorough preparation before the actual workshop. Further research should look more systematically at the factors that influence the success of a given workshop and the various ways in which participants perceive success.