Treatment Technology Evaluation for Aqueous Metal and Cyanide Bearing Hazardous Wastes (F007)

As a result of recent developments In the area of hazardous waste management, the U.S. Environmental Protection Agency Is evaluating the performance of various technologies for the treatment and/or the destruction of certain wastes that are presently being disposed of In landfills and surface Impoundments. As a part of this program, the University of Cincinnati Is testing currently available treatment technologies that are applicable to metal- and cyanidebearing hazardous wastes at the U.S. EPA Test and Evaluation Facility In Cincinnati, Ohio. The following unit processes have been evaluated: alkaline chlorlnatlon, lime precipitation/ flocculation/settllng, multi-media filtration, anlon exchange, and cation exchange. Examination of several process configurations, utilizing the above-mentioned unit processes, did not produce any treatment train that could prevent codepositlon of cyanides and metals In the sludges when the feed stream contained mixed metals and complexed cyanides. It was also determined that special anion exchange resins are capable of removing the compiexed cyanides that are not destroyed by alkaline chlorlnatlon. Concentration of each of the metals in the final effluent from the cation exchange unit was less than 0.4 mg/L.     

Improvement of Physico-Mechanical Properties of Photo-Cured Chitosan Films with Ethylene Glycol Dimethacrylate and (2-Hydroxyethyl) Methacrylate

Chitosan, a natural polymer, was prepared by deacetylation of chitin which was obtained from dried prawn shell and was characterized. Thin chitosan film of chitosan was prepared by casting method from 0.2 % chitosan in 2 % acetic acid solution. Five formulations were developed with ethylene glycol dimethacrylate and (2-hydroxyethyl) methacrylate along with photo-initiator, Darocur-1664 (4 %). The chitosan film was soaked in the formulations at different soaking times and irradiated under UV-radiation at different intensities for the improvement of its physical and mechanical properties. The cured chitosan films were then subjected to various mechano-chemical tests like tensile strength, elongation at break, polymer loading, water absorption and gel content. The formulation containing 30 % ethylene glycol dimethacrylate and 66 % (2-hydroxyethyl) methacrylate showed the best performance at the 30th UV pass of UV-radiation for 3 min soaking time.     

Evaluation of non-enteric sources of non-methane volatile organic compound (NMVOC) emissions from dairies

Dairies are believed to be a major source of volatile organic compounds (VOC) in Central California, but few studies have characterized VOC emissions from these facilities. In this work, samples were collected from six sources of VOCs (Silage, Total Mixed Rations, Lagoons, Flushing Lanes, Open Lots and Bedding) at six dairies in Central California during 2006–2007 using emission isolation flux chambers and polished stainless steel canisters. Samples were analyzed by gas chromatography/mass spectrometry and gas chromatography/flame ionization detection. Forty-eight VOCs were identified and quantified in the samples, including alcohols, carbonyls, alkanes and aromatics. Silage and Total Mixed Rations are the dominant sources of VOCs tested, with ethanol as the major VOC present. Emissions from the remaining sources are two to three orders of magnitude smaller, with carbonyls and aromatics as the main components. The data suggest that animal feed rather than animal waste are the main source of non-enteric VOC emissions from dairies.     

Effects of environmental factors on the seasonally change of phytoplankton populations in a closed freshwater pond.

The effect of environmental factors affecting the population dynamic of phytoplankton population was studied seasonally in a closed freshwater pond with the natural water of Lake Kasumigaura, Japan. The predominant phytoplankton species in the pond were classified as Oscillatoria tenuis, Synedra ulna, Chlamydomonas cingulata and Cyclotella kutzingiana, with dominant species of Melosira italica, Synechococcus sp. and Cryptomonas ovata. The most important limiting factor for filament length and cell size of most of the phytoplankton community was temperature. Availability of most nutrients had profound effects on the phytoplankton growth as nonlimiting factors. Based on our results, it is suggested that cell cycle progression was also temporally regulated by a multiplicity of external factors such as temperature, nutrients, dissolved oxygen (DO) and pH. At high pH and high temperature, consistent increase of cell division of some phytoplanketers such as Synedra, Cyclotella, Chlamydomonas and Melosira occurs, and there also may be species-specific responses for other species of phytoplankters. In addition, the cell divisions of phytoplankters are differentially regulated in different phytoplankton species.     

Use of constructed wetland for the removal of heavy metals from industrial wastewater

This study was conducted to investigate the effectiveness of a continuous free surface flow wetland for removal of heavy metals from industrial wastewater, in Gadoon Amazai Industrial Estate (GAIE), Swabi, Pakistan. Industrial wastewater samples were collected from the in-let, out-let and all cells of the constructed wetland (CW) and analyzed for heavy metals such as lead (Pb), cadmium (Cd), iron (Fe), nickel (Ni), chromium (Cr) and copper (Cu) using standard methods. Similarly, samples of aquatic macrophytes and sediments were also analyzed for selected heavy metals. Results indicate that the removal efficiencies of the CW for Pb, Cd, Fe, Ni, Cr, and Cu were 50%, 91.9%, 74.1%, 40.9%, 89%, and 48.3%, respectively. Furthermore, the performance of the CW was efficient enough to remove the heavy metals, particularly Cd, Fe, and Cu, from the industrial wastewater fed to it. However, it is suggested that the metal removal efficiency of the CW can be further enhanced by using proper management of vegetation and area expansion of the present CW.     

A critical review of the emerging research on the detection and assessment of microplastics pollution in the coastal,marine, and urban Bangladesh

● Coastal and marine regions are the most studied for microplastic pollution. ● Tourism is a major cause of microplastic pollution in coastal regions. ● Sediments contain larger microplastics while fish ingest smaller microplastics. ● Inland lakes, rivers, and freshwater fish are impacted by microplastic pollution. ● Microplastics are found in edible salts, however, presence is less in refined salt. The research on the extent and effects of microplastics pollution in the Global South is only getting started. Bangladesh is a South Asian country with one of the fastest growing economies in the world, however, such exponential economic growth has also increased the pollution threats to its natural and urban environment. In this paper, we reviewed the recent primary research on the assessment of the extent of microplastics pollution in Bangladesh. From the online databases, we developed a compilation of emerging research articles that detected and quantified microplastics in different coastal, marine, and urban environments in Bangladesh. Most of the studies focused on the coastal environment (e.g., beach sediment) and marine fish, while limited data were available for the urban environment. We also discussed the relationship of the type of anthropogenic activities with the observed microplastic pollution. The Cox’s Bazar sea beach in south-east Bangladesh experienced microplastics pollution due to tourism activities, while fishing and other anthropogenic activities led to microplastics pollution in the Bay of Bengal. While microplastics larger than 1 mm were prevalent in the beach sediments, smaller microplastics with size below 0.5 mm were prevalent in marine fish samples. Moreover, the differences in microplastic abundance, size, shape, color, and polymer type found were depended on the sampling sites and relevant anthropogenic activities. It is imperative to identify major sources of microplastics pollution in both natural and urban environment, determine potential environmental and human health effects, and develop mitigating and prevention strategies for reducing microplastics pollution.     

Surfactant enhanced pyrene degradation in the rhizosphere of tall fescue (Festuca arundinacea)

Environmental Science and Pollution Research - The present study was conducted to evaluate the effect of two non ionic surfactants (Tween 80 and Triton X-100), a biosurfactant (Lecithin), and...     

Development of Anticorrosive Poly(Ether-Urethane) Amide Coatings from Linseed Oil: A Sustainable Resource

Polyetheramide(PEtA) resin was synthesized by the condensation polymerization of N,N-bis(2-hydroxy ethyl) linseed oil fatty amide diol (HELA) with resorcinol. It was further treated with different percentage of toluylene 2-4-diisocyanate (TDI) to obtain the urethane modified polyetheramide resins (UPEtA). The structural elucidation of PEtA and urethane modified polyetheramide(UPEtA) were carried out by FT-IR, ¹H-NMR and ¹³C-NMR spectroscopic techniques. These analyses confirm the formation of PEtA and UPEtA. Physico-chemical and physico-mechanical analysis were performed by standard laboratory methods. The resin composition UPEtA-24 showed best physico-mechanical properties with scratch hardness 2.0 kg, impact resistance 150 lb/in. and good bending ability. The thermal stability and curing behavior of polymers were respectively studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Thermal analysis shows that these coatings can be used safely upto 190 °C. The coatings of UPEtA resins were prepared on mild steel strips. The anticorrosive behavior of UPEtA coatings were investigated in acid, alkali, water and xylene. All the coatings exhibit good chemical resistance performance in acid, alkali, saline and organic solvents, while the resin UPEtA-24 shows the best performance.