Leaching of styrene and other aromatic compounds in drinking water from PS bottles

Bottled water may not be safer, or healthier, than tap water. The present studies have proved that styrene and some other aromatic compounds leach continuously from polystyrene （PS） bottles used locally for packaging. Water sapmles in contact with PS were extracted by a preconcentration technique called as ＂purge and trap＂ and analysed by gas chromatograph-mass spectrometer （GC/MS）. Eleven aromatic compounds were identified in these studies. Maximum concentration of styrene in PS bottles was 29.5 μg/L. Apart from styrene, ethyl benzene, toluene and benzene were also quantified but their concentrations were much less than WHO guide line values. All other compounds were in traces. Quality of plastic and storage time were the major factor in leaching of styrene. Concentration of styrene was increased to 69.53 μg/L after one-year storage. In Styrofoam and PS cups studies, hot water was found to be contaminated with styrene and other aromatic compounds. It was observed that temperature played a major role in the leaching of styrene monomer from Styrofoam cups. Paper cups were found to be safe for hot drinks.     

Sustainable technologies for on-site domestic wastewater treatment: a review with technical approach

Environment, Development and Sustainability - The rapid population growth has rendered the centralized sewerage systems a non-realistic option in sparsely populated areas, particularly in...     

Sustainable EOQ and EPQ models for a two-echelon multi-product supply chain with return policy

Environment, Development and Sustainability - In this work, a new model is developed to determine optimum sustainable economic order quantity (EOQ) and economic production quantity (EPQ) values for...     

A pathway toward future sustainability: Assessing the influence of innovation shocks on CO2 emissions in developing economies

Environment, Development and Sustainability - The prior empirical research focuses on examining only the procyclical impact of innovation on carbon emissions (CO2e), in the majority of cases, for...     

气提式三重循环生物膜反应器处理制药废水中的甾体雌激素

为验证气提式三重循环生物膜反应器处理甾体雌激素的效能,建立了一套SPE/HPLC/MS/MS分析方法,对反应器进、出水中的甾体雌激素--甾酮(E1),17β-雌二醇(E2),雌三醇(E3)以及17α-乙炔基雌二醇(EE2)进行检测.该方法的加标回收率为88%～103%,精密度为4%～9%.该方法对E1,E2,E3和EE2的进水定量限(LOQ)分别为0.7,0.8,0.9和0.5 ng/L;对出水的定量限分别为2.0,1.0,2.0和 1.0 ng/L.CODCr和氨氮容积负荷最高为7.5和1.6 kg/(m3·d),出水依然能够保持稳定.进水pH稳定在9.0～10.5,而反应器的pH一直稳定在9.0以下,体系对pH变化造成的冲击比较适应.同时,反应器内形成了稳定的NO2--N积累,CODCr和氨氮的去除率分别达到了70%和73%.     

Osmoregulation in the euryhaline flagellate Brachiomonas submarina (Chlorophyceae)

Brachiomonas submarina Bohlin (Chlorophyceae), a euryhaline marine flagellate, can osmoregulate over a wide range of external salinity. The alga exhibits maximum water content at 100% artificial seawater (ASW), and shows only a small water loss (<15%) when salinity is increased to 300% ASW. The non-aqueous volume of the cells is increased at salinities higher than 100% ASW. This is partially attributable to the accumulation of glycerol. Glycerol is the major osmoregulatory organic solute in this flagellate. The alga also shows an accumulation of amino acids in response to increased salinity. The contribution of glycerol and amino acids to intracellular osmolarity is only 9% at 10% ASW, but accounts for 49% at 300% ASW. The remainder of the osmotic balance is due to uptake and accumulation of inorganic ions, particularly sodium, potassium and chloride.     

Age-specific life tagle of red cotton stainer (fabricius) (hemiptera: Pyrrhocoridae)

The present studies on the age-specific life table of red cotton stainer suggest that the eggs and the initial immature stages are the most suceptible ones and a control measure if inflicted upon these, it might fetch the maximum result with the minimum usage of hazardous poisonous chemicals.     

Distribution,sources and pollution status of Pb in indoor and outdoor dusts of Kerman City,SE Iran

The aims of this study were to explore the status of pollution and the temporal/spatial distribution of indoor and outdoor dust-Pb in the city of Kerman (SE Iran), located in a dry playa and arid climatic zone. Flat panes were laid at appropriate locations, in the indoor and the outdoor spaces of selected one-story houses in different areas of the city, to collect dust samples. Forty-two samples were taken and analyzed using the ICP-MS method. The measurements have shown that the outdoor dust-Pb concentrations varied from 23.7 to 275.2?mg kg^?1, with a mean value of 71.8?mg kg^?1, and indoor dust-Pb concentrations ranged from 47.6 to 150.2?mg kg^?1, with a mean value of 89.6?mg kg^?1. Based on these measurements, Pb was enriched in the outdoor and the indoor dust samples up to 48.8 and 29.4 times, respectively. Dilution, as a result of prevalence of geogenic dust in the outdoor space, is expected to be the main cause of the temporal differences. This study has shown that the eastern part of the city is more polluted compared to the other parts, and, because of the stable air conditions, the concentration of Pb in the summer dust is higher than the other seasons.     

Dissipation of the herbicide clopyralid in an allophanic soil: laboratory and field studies

Soil dissipation of the herbicide clopyralid (3,6-dichloropicolinic acid) was measured in laboratory incubations and in field plots under different management regimes. In laboratory studies, soil was spiked with commercial grade liquid formulation of clopyralid (Versatill, 300 g a.i. L(-1) soluble concentrate) @ 0.8 microg a.i. g(-1) dry soil and the soil water content was maintained at 60% of water holding capacity of the soil. Treatments included incubation at 10 degrees C, 20 degrees C, 30 degrees C, day/night cycles (25/15 degrees C) and sterilized soil (20 degrees C). Furthermore, a field study was conducted at the Waikato Research Orchard near Hamilton, New Zealand starting in November 2000 to measure dissipation rates of clopyralid under differing agricultural situations. The management regimes were: permanent pasture, permanent pasture shielded from direct sunlight, bare ground, and bare ground shielded from direct sunlight. Clopyralid was sprayed in dilute solution @ 600 g a.i. ha(-1) on to field plots. Herbicide residue concentrations in soil samples taken at regular intervals after application were determined by gas chromatograph with electron capture detector. The laboratory experiments showed that dissipation rate of clopyralid was markedly faster in non-sterilized soil (20 degrees C), with a half-life (t1/2) of 7.3 d, than in sterilized soil (20 degrees C) with t1/2 of 57.8 d, demonstrating the importance of micro-organisms in the breakdown process. Higher temperatures led to more rapid dissipation of clopyralid (t1/2, 4.1 d at 30 degrees C vs 46.2 d at 10 degrees C). Dissipation was also faster in the day/night (25/15 degrees C) treatment (t1/2, 5.4 d), which could be partly due to activation of soil microbes by temperature fluctuations. In the field experiment, decomposition of clopyralid was much slower in the shaded plots under pasture (t1/2, 71.5 d) and bare ground (t1/2, 23.9 d) than in the unshaded pasture (t1/2, 5.0 d) and bare ground plots (t1/2, 12.9 d). These studies suggest that environmental factors such as temperature, soil water content, shading, and different management practices would have considerable influence on rate of clopyralid dissipation.