Evaluating greywater reuse potential for sustainable water resources management in Oman

This study aims to evaluate the potential of greywater availability in Muscat Governorate in the Sultanate of Oman, to establish a methodology for greywater quantity estimation, to test greywater quality in order to assess reuse potential, and to examine public acceptance for reuse.Total fresh water consumption and greywater generation from different household sources were measured by water meters in five selected households during summer and winter. Additionally, a survey was designed and conducted in five administrative areas of Muscat Governorate, with the objective of testing a methodology for estimating greywater generation potential in these areas. Collected data were compared with that used by the Ministry of Housing, Electricity and Water, Sultanate of Oman. The survey covered a total of 169 houses and 1,365 people. Greywater samples were collected and analyzed from showers, laundries, kitchens and sinks in some of these households to determine their water quality parameters. Statistical analysis results indicated that there is no significant variance in the total fresh water consumption between data used by the ministry and those measured and estimated during this study, highlighting the applicability of the tested method. The study concluded that the average per capita greywater generation rate is 151 Lpcd. Greywater production ranged from 80 to 83% of the total fresh water consumption and most of the greywater is generated from showers. Further, 55 to 57% of the greywater generated in a typical Omani household originated from the shower, 28 to 33% originated from the kitchen, 6 to 9% originated from laundry, and 5 to 7% originated from sink, which constitutes approximately 81% of the total fresh water consumption. The physical, chemical, and biological analyses of the grab samples revealed that greywater contains significant levels of suspended solids, inorganic constituents, total organic carbon, chemical and biochemical oxygen demands, total Coliforms and Escherichia Coliform bacteria. The public acceptance survey illustrated that approximately 76% of the respondents accepted the reuse of greywater for gardening, 53% for car washing and 66% for toilet flushing.     

Trend in metals variation in Tasik Chini, Pahang, Peninsular Malaysia

Water from 15 sampling stations in Tasik Chini (Chini Lake), Peninsular Malaysia were sampled for 12 months from September 2004 until August 2005 and analyzed for 11 metals including iron (Fe), aluminum (Al), manganese (Mn), barium (Ba), zinc (Zn), lead (Pb), copper (Cu), cadmium (Cd), nickel (Ni), chromium (Cr) and cobalt (Co). Results showed that the mean (min-max) metal concentrations (in micrograms per liter) in Tasik Chini waters for the 12 months sampling based on 15 sampling stations (in descending order) for Fe, Al, Mn, Ba, Zn, Pb, Cu and Cd were 794.84 (309.33-1609.07), 194.53 (62.37-665.93), 29.16 (16.68-79.85), 22.07 (15.64-29.71), 5.12 (2.224-6.553), 2.36 (1.165-4.240), 0.832 (0.362-1.443) and 0.421 (0.254-0.696) respectively. Concentration for three metals i.e. Ni, Cr and Co were too low and not detected by the graphite furnace Atomic Absorption Spectrophotometry (AAS). Comparison with various water quality standards showed that the mean metals concentration in surface water of Tasik Chini were low and within the range of natural background except for Fe and Al. In general, metal concentrations in Tasik Chini water varied temporally and spatially. The main factors influencing these metal concentrations in the water were the raining season and mining activities. Stations located at Tanjung Jerangking and Melai areas were the most effected due to those factors.     

Multivariate analysis of heavy metals concentrations in river estuary

Multivariate statistical techniques such as multivariate analysis of variance (MANOVA) and discriminant analysis (DA) were applied for analyzing the data obtained from two rivers in the Penang State of Malaysia for the concentration of heavy metal ions (As, Cr, Cd, Zn, Cu, Pb, and Hg) using a flame atomic absorption spectrometry (F-AAS) for Cr, Cd, Zn, Cu, Pb, As and cold vapor atomic absorption spectrometry (CV-AAS) for Hg. The two locations of interest with 20 sampling points of each location were Kuala Juru (Juru River) and Bukit Tambun (Jejawi River). MANOVA showed a strong significant difference between the two rivers in terms of heavy metal concentrations in water samples. DA gave the best result to identify the relative contribution for all parameters in discriminating (distinguishing) the two rivers. It provided an important data reduction as it used four parameters (Zn, Pb, Cd and Cr) affording 100% correct assignations. Results indicated that the two rivers were different in terms of heavy metals concentrations in water, and the major difference was due to the contribution of Zn. A negative correlation was found between discriminate functions (DF) and Cr and As, whereas positive correlation was exhibited with other heavy metals. Therefore, DA allowed a reduction in the dimensionality of the data set, delineating a few indicator parameters responsible for large variations in heavy metal concentrations. Correlation matrix between the parameters exhibited a strong evidence of mutual dependence of these metals.     

Assessment of groundwater vulnerability in the coastal region of Oman using DRASTIC index method in GIS environment

A study was carried out to develop a vulnerability map for Barka region in the North Batina of Oman using DRASTIC vulnerability index method in GIS environment. DRASTIC layers were created using data from published reports and the seven DRASTIC layers were processed by the ArcGIS geographic information system. Finally, DRASTIC maps were created for 1995 and 2004 to understand the long-term changes in the vulnerability index. DRASTIC vulnerability maps were evaluated using groundwater quality data such as chemical and biological parameters. DRASTIC vulnerability maps of 1995 and 2004 indicate that the northern part of Barka is more vulnerable to pollution than southern part and the central part of Barka also shows high relative vulnerability which is mostly related to the high conductivity values. Moreover, the changes in water level due to high abstraction rate of groundwater reflect in the vulnerability maps and low vulnerability area is increased in the southern part during 2004 compared to 1995. Moreover, regional distribution maps of nitrate, chloride and total and fecal coliforms are well correlated with DRASTIC vulnerability maps. In contrast to this, even though DRASTIC method predicted the central part of the study region is highly vulnerable, both chemical and biological parameters show lower concentrations in this region compared to coastal belt, which is mainly due to agricultural and urban development. In Barka, urban development and agricultural activities are very high in coastal region compared to southern and central part of the study area. Hence, this study concluded that DRASTIC method is also applicable in coastal region having ubiquitous contamination sources.     

Determination of toxic inorganic elements pollution in ground waters of Kahuta Industrial Triangle Islamabad, Pakistan using inductively coupled plasma mass spectrometry

The present study deals with the ground water quality assessment in Kahuta Industrial Triangle Islamabad, Pakistan. The objective of the study was to assess ground water quality against the drinking water standards for various toxic inorganic elements. Representative groundwater samples were collected and analyzed in the Water Quality Laboratory of Pakistan Council of Research in Water Resources (PCRWR) at Islamabad, Pakistan. The samples were run on ICP-MS (Inductively coupled plasma mass spectrometry), which has the capability to separate and quantify 70 elements at a time. One of the finding of study is that ICP-MS is a very good tool to analyze broad range of toxic inorganic elements to the level of parts per billion (ppb). World Health Organization drinking water standards shows that these toxic inorganic elements such as heavy metals even at this concentration level (ppb) are injurious to human health. This analysis indicated pollution of various toxic elements including Selenium. Vertical leachate through industrial waste septic tanks is identified as major cause of groundwater pollution in the Industrial Triangle. Monitoring of the septic tanks and groundwater quality in study area is suggested along with remedial measures.     

Indoor Air Quality at Rural and Urban Sites in Pakistan

In the developing world, the vast majority of people rely on solid biomass fuels for cooking and heating which results in poor indoor air quality. The present study determined indoor air quality in some rural and urban areas of Pakistan. Measurements were made of particulate mass (PM10, PM2.5 and PM1), number concentration and bioaerosols in different micro environments. PM10 concentrations of up to 8,555 μg/m³ were observed inside the kitchens where biofuels were used as energy source. Cleaning and smoking was identified as a major source of indoor particulate pollution and concentrations of more than more than 2,000 μg/m³ were recorded in the living room during these activities. Indoor number concentrations in Lahore were typically greater than those observed outdoors in European cites. At a rural site the highest Colony Forming Units (CFUs) were in the 0.5 μm–2 μm size fraction, while at the urban location CFUs were dominant for 2 μm–16 μm. It was observed that CFUs(Colony Forming Units) counts were higher inside living rooms than kitchens. It is important to note that women and children were exposed to extremely high levels of particulates during cooking. Overall, indoor air quality in Pakistan was poor and there is a dire need to take a serious step to combat with it.     

Spatial and temporal projected distribution of four crop plants in Egypt

This study focuses on the management of the local agroecosystems in order to adapt planting or sowing practices for the projected climate change scenarios. It is projected that there will be increased air temperature throughout all four seasons in the coming 100 years, from the southern towards the northern parts of Egypt. The objective of this study is to investigate the influence of that increased air temperature on the spatial and temporal distribution of four of the major economic crops in Egypt. The study species are cotton (Gossypium barbadense L., cv. Giza 89), wheat (Triticum aestivum L., cv. Gemiza 9), rice (Oryza stiva L., cv. Sakha 101) and maize (Zea mays L., cv. Hybrid 10). Optimum air temperature allowing maximum growth for each of the study crop cultivars and the current and projected air temperature patterns in the future years were used for projection of the seasonal and crop distribution maps in the years 2005, 2025, 2050, 2075 and 2100. Results showed that sowing dates of a target crop may be managed in order to allow maximum predicted planting area in the same region. The current maximum area suitable for planting the Cotton crop in Egypt (104 thousand Fadden/year; one Fadden = 0.96 hectare or 0.42 acre) showed few variations over the coming hundred years. In this case, the sowing dates should be changed from the hotter months (February to April) to the cooler months (January to February). Alternatively, a great reduction in the area planted by Wheat crop was predicted in the coming 100 years. Despite the early planting, a reduction of about 147 thousand Fadden/year was projected by the year 2075. On the other hand, with earlier sowing dates, the maximum areas that are planted by Rice and Maize may not be greatly affected by the projected increase in air temperature.     

Evidence of hydrocarbon contamination from the Burgan oil field, Kuwait: interpretations from thermal remote sensing data

The paper presents the application of thermal remote sensing for mapping hydrocarbon polluted sites. This has been achieved by mono-window algorithm for land surface temperature (LST) measurements, using multi-date band 6 data of Landsat Thematic Mapper (TM). The emissivity, transmittance and mean atmospheric temperature were used as critical factors to estimate LST. The changes in the surface emissivity due to oil pollution alter the apparent temperature, which was used as a recognition element to map out oil polluted surfaces. The LST contrast was successfully used to map spatial distribution of hydrocarbon pollution in the Burgan Oil field area of Kuwait. The methodology can be positively used to detect waste dumping, oil spills in oceans and ports, besides environmental management of oil pollution at or near the land surface.     

Biochemical characterization of a multiple heavy metal, pesticides and phenol resistant Pseudomonas fluorescens strain

Pseudomonas fluorescens SM1 isolate was found to be resistant to some major water pollutants namely Cd2+, Cr6+, Cu2+, Ni2+, Pb2+, BHC, 2,4-D, mancozeb and phenols up to a concentration four times to the normal levels occurring in the highly pollulated regions. Curing experiment brought about the loss of one or more resistance markers indicating the plasmid born resistance. Plasmid profile of SM1 strain showed the presence of one DNA band of 43.6 kb. This Plasmid was isolated from SM1 strain and introduced into Escherichia coli DH5 alpha with a transformation frequency of 6.7 x 10(-4)transformants/recipient cell. The test SM1 strain was also capable of biotransforming Cr(VI) to Cr(III) which is less toxic compounds. Present studies further indicated that the test SM1 strain was not only resistant to 2,4-D, phenols and catechol but also capable of bioremediating these toxicants quite efficiently. Moreover, studies with inhibitors like sodium azide, 2,4-DNP and chloramphenicol suggested that the major mechanism for the bioremediation of the heavy metals other than Cr6+ would be the biosorption process.     

24-Epibrassinolide protects against the stress generated by salinity and nickel in Brassica juncea

The plants of Brassica juncea (L) were grown in the presence of NaCl and/or NiCl2 and were sprayed with 1muM of 24-epibrassinolide (EBL) at 15 days after sowing (DAS) and were sampled at 30 DAS. The plants exposed to NaCl and/or NiCl2 exhibited a significant decline in growth, the level of pigments and photosynthetic parameters. However, the follow up treatment with EBL detoxified the stress generated by NaCl and/or NiCl2 and significantly improved the above parameters. The NaCl and/or NiCl2 increased electrolyte leakage and lipid peroxidation, and decreased the membrane stability index (MSI) and relative water content. However, the EBL treatment in absence of the stress improved the MSI and relative water content but could not influence electrolyte leakage and lipid peroxidation. The antioxidative enzymes and the level of proline exhibited a significant increase in response to EBL as well as to NaCl and/or NiCl2 stress.