Simultaneous determination of seven anticoagulant rodenticides in agricultural products by gel permeation chromatography and liquid chromatography–tandem mass spectrometry

A sensitive and reliable method for the simultaneous determination of hydroxycoumarin-type (brodifacoum, bromadiolone, coumatetralyl, and warfarin) and indandione-type (chlorophacinone, diphacinone, and pindone) rodenticides in agricultural products by gel permeation chromatography (GPC) and liquid chromatography–tandem mass spectrometry (LC–MS/MS) was developed. The procedure involved extraction of the rodenticides from samples with acetone, followed by liquid–liquid partitioning with hexane/ethyl acetate (1:1, v/v) and 10% sodium chloride aqueous solution, then cleanup using GPC, and finally, analysis using LC–MS/MS. High recoveries from the GPC column were obtained for all rodenticides tested using a mobile phase of acetone/cyclohexane/triethylamine (400:1600:1, v/v/v). An ODS column, which contains low levels of metal impurities, gave satisfactory peak shapes for both hydroxycoumarin- and indandione-type rodenticides in the LC–MS/MS separation. The average recoveries of rodenticides from eight agricultural foods (apple, eggplant, cabbage, orange, potato, tomato, brown rice, and soybean) fortified at 0.0005–0.001 mg/kg ranged from 76 to 116%, except for bromadiolone in orange (53%) and diphacinone in soybean (54%), and the relative standard deviations ranged from 1 to 16%. The proposed method effectively removed interfering components, such as pigments and lipids, and showed high selectivity. In addition, the matrix effects were negligible for most of the rodenticide/food combinations. The results suggest that the proposed method is reliable and suitable for determining hydroxycoumarin- and indandione-type rodenticides in agricultural products.     

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate

Improvement of air quality models is required so that they can be utilized to design effective control strategies for fine particulate matter (PM_2.5). The Community Multiscale Air Quality modeling system was applied to the Greater Tokyo Area of Japan in winter 2010 and summer 2011. The model results were compared with observed concentrations of PM_2.5 sulfate (SO₄^2-), nitrate (NO₃^?) and ammonium, and gaseous nitric acid (HNO₃) and ammonia (NH₃). The model approximately reproduced PM_2.5 SO₄^2? concentration, but clearly overestimated PM_2.5 NO₃^? concentration, which was attributed to overestimation of production of ammonium nitrate (NH₄NO₃). This study conducted sensitivity analyses of factors associated with the model performance for PM_2.5 NO₃^? concentration, including temperature and relative humidity, emission of nitrogen oxides, seasonal variation of NH₃ emission, HNO₃ and NH₃ dry deposition velocities, and heterogeneous reaction probability of dinitrogen pentoxide. Change in NH₃ emission directly affected NH₃ concentration, and substantially affected NH₄NO₃ concentration. Higher dry deposition velocities of HNO₃ and NH₃ led to substantial reductions of concentrations of the gaseous species and NH₄NO₃. Because uncertainties in NH₃ emission and dry deposition processes are probably large, these processes may be key factors for improvement of the model performance for PM_2.5 NO₃^?.

Implications: The Community Multiscale Air Quality modeling system clearly overestimated the concentration of fine particulate nitrate in the Greater Tokyo Area of Japan, which was attributed to overestimation of production of ammonium nitrate. Sensitivity analyses were conducted for factors associated with the model performance for nitrate. Ammonia emission and dry deposition of nitric acid and ammonia may be key factors for improvement of the model performance.     

Mineral carbonation using alkaline waste and byproducts to reduce CO2 emissions in Taiwan

Environmental Chemistry Letters - Climate change induced partly by emissions of carbon dioxide (CO2) is an urgent issue worldwide, calling for advanced methods of carbon sequestration. Since...     

Do national levels of individualism and internal locus of control relate to well‐being: an ecological level international study

Data were collected from managers in 24 nations/territories on work locus of control (LOC), individualism–collectivism (I–C), and well‐being (job satisfaction, absence of psychological strain, and absence of physical strain). There were significant mean differences across samples on all five of these measures, and consistent with our hypothesis, at the ecological or sample mean level well‐being was associated with an internal locus of control. However, contrary to our hypothesis, well‐being was not associated with I–C, despite a strong correlation between I–C and LOC. Findings at the ecological level were consistent with the literature concerning the salutary effects of control on well‐being. Copyright © 2001 John Wiley & Sons, Ltd.     

Movement patterns of American eels (Anguilla rostrata) between salt- and freshwater in a coastal watershed, based on otolith microchemistry

Otolith strontium:calcium ratios were used to trace lifetime movements of American eels (Anguilla rostrata) captured in salt-water bays and adjoining freshwater ponds in Prince Edward Island, Canada. Eels were classified into migratory contingents based on their movement patterns. A pond with a pool-and-weir salmonid fishway and a pond drained by a low-gradient channel contained eels that had entered freshwater at all ages, but a pond with a 2.2 m vertical spillway contained only eels that had entered freshwater in the elver year. Salt-water residents were the dominant migratory contingent in salt-water bays (85% of 39), which overturns the paradigm of obligate catadromy for this species. Freshwater residency was the sole pattern found in the pond with the vertical spillway (100% of 12) and the majority contingent in the pond with the low-gradient channel (54% of 24). Inter-habitat shifting was the dominant migratory contingent in eels sampled from the pond with the pool-and-weir fishway (85% of 20). Resident eels were established in salt- and freshwater habitats by the year after their arrival in continental waters. Eels that shifted between habitats increased their rate of inter-habitat shifting with age. The high degree of plasticity in habitat use found in this study is consistent with worldwide Anguillid patterns as revealed by Sr:Ca.An erratum to this article can be found at     

Micro dimple milling on cylinder surfaces

The paper presents a micro dimple machining on a cylinder surface with a two-flutes ball end mill. When the cutter axis is inclined and the depth of cut is less than the tool radius, non-cutting time, during which neither of the two cutting edges contacts the workpiece, appears in a rotation of the cutter. The rotation of the workpiece and the feed of the tool are controlled so that the cutting areas do not overlap each other. In order to incline the tool with respect to the tangential direction on the cylinder surface, the tool is located at a position oriented at 45° from the top of the cylinder. An analytical model is presented to control the shapes of the dimples with the cutting parameters. The presented machining is verified in cutting tests with measuring the shape and the profile of the dimples. Pre-machining operations are conducted to have a high cylindricity of the workpiece in longitudinal turning and polishing. The cutter runout of the tool is also eliminated by adjusting the orientation and the position of the tool in the collet chuck with measuring the cutting force. The micro dimples are machined accurately as they are simulated.