黄淮地区冬小麦的抗晚霜冻害能力

使用人工移动霜箱,对黄淮麦区小麦霜冻害的抗冻性进行了研究。结果表明,按幼穗的冰点来判定不同品种的抗霜能力,可以将小麦的抗霜冻能力分为4个等级:-4℃以上抗性弱,-4～-5℃抗性较弱,-5～-6℃抗性较强,-6℃以下抗性强。随着生育进程的推进,小麦的冰点升高;随着茎高的增高,冰点升高,主茎和分蘖的受害率增大;随着细胞液浓度的升高,冰点降低,受害率降低。小麦在雌雄蕊末到药隔初的冰点温度较高。随着生育时期的推进,幼穗的冻死率升高,而其冻伤率降低。     

Influence of coating method on catalyst activity of AgCl/Al2O3/SUS304 composite plate

The γ-Al₂0₃ and AgCl/Al₂0₃ catalyst powder were coated on a stainless steel substrate by dip coating and electrophoretic deposition method. And AgCl/Al₂0₃ catalyst was produced by three kinds of methods, and the difference between the NOx reduction catalysis of the coated sample was compared. XRD and SEM were used to study the crystalline structure and cross-section of the coatings. The coating of γ-Al₂0₃ with the thickness of 3-5 μm and AgCl/Al₂0₃ catalyst with the thickness of 5-9 μrn were made on the surface of SUS304 plate without exfoliation. The NOx conversion of the coated sample with catalyst was about 70% at the maximum.     

Microfluidic quantification of multiple enteric and opportunistic bacterial pathogens in roof-harvested rainwater tank samples

Potable and non-potable uses of roof-harvested rainwater (RHRW) are increasing due to water shortages. To protect human health risks, it is important to identify and quantify disease-causing pathogens in RHRW so that appropriate treatment options can be implemented. We used a microfluidic quantitative PCR (MFQPCR) system for the quantitative detection of a wide array of fecal indicator bacteria (FIB) and pathogens in RHRW tank samples along with culturable FIB and conventional qPCR analysis of selected pathogens. Among the nine pathogenic bacteria and their associated genes tested with the MFQPCR, 4.86 and 2.77% samples were positive for Legionella pneumophila and Shigella spp., respectively. The remaining seven pathogens were absent. MFQPCR and conventional qPCR results showed good agreement. Therefore, direct pathogen quantification by MFQPCR systems may be advantageous for circumstances where a thorough microbial analysis is required to assess the public health risks from multiple pathogens that occur simultaneously in the target water source.     

Evaluation of data quality in Japanese National Forest Inventory

We evaluated the quality of data being collected for the Japanese National Forest Inventory (NFI). The inventory program commenced in 1999 but has not incorporated a quality assurance (QA) program; we sought to determine what effect this was having on the quality of data being collected. Forty-eight plots in four prefectures were measured by operational field teams and then remeasured by a control team that made careful and unhurried measurements. The paired data were evaluated, including diameter, total height, tree count, species richness, and topographic condition. Compared to the control team, all field teams of each prefecture tended to significantly underestimate all of the continuous variables. Most variables had larger variability in the inventory data than has been reported in the published literature. The findings of consistent bias and large variation in the field team measurements call for urgent implementation of a quality assurance program (extensive field training and regular remeasurement) in the Japanese NFI to improve data quality, and this conclusion could be applied to the inventory system of any country that does not include a QA program.     

Decomposition and removal of ionic liquid in aqueous solution by hydrothermal and photocatalytic treatment

We demonstrated a complete decomposition method for ionic liquids (ILs; organic cation part: butyl-methyl or ethyl-methyl imidazolium, and inorganic anion part: PF₆ ⁻, BF₄ ⁻ or Br⁻) in aqueous media by combining a hydrothermal mineralization method with a photocatalytic decomposition (PD) method. As a result, the hydrothermal treatment with Ca(OH)₂ mineralizer could effectively remove the inorganic anion part, such as PF₆ ⁻ or BF₄ ⁻ and the PD could decompose the organic cation part effectively. Therefore, the detoxification of ILs in aqueous media was accomplished by the present method.     

Composting of food refuse from a student restaurant in Hokkaido University

Over a period of 21 months, we composted food refuse from a student restaurant in Hokkaido University using a commercially available composting machine. The machine had two reactors, each with a working volume of 250 l. The refuse was mixed with sawdust in a ratio of 5 l sawdust to 10 kg refuse, and this mixture was fed into the machine daily. We studied the characteristics of the refuse, the composting mixture, and the finished compost in an effort to optimize the operating parameters. We also evaluated the effectiveness of the composting process by determining the decomposition rates of the composting materials. The optimum moisture content of the composting mixture was between 30% wet basis (wb) and 40% wb in this machine. The composting machine worked well when the first reactor was filled with composting mixture and 0.5 kg lime was added once per week. The mass of the materials supplied was reduced by 84% over the study period. The decomposition rate of the volatile matter in all composting materials was 66%. The mass of the food refuse supplied was 14.8 kg/day on average, and the moisture content of the refuse was 77% wb on average. Received: October 4, 1999 / Accepted: April 4, 2000     

Applications of a hydro-biogeochemical model and long-term simulations of the effects of logging in forested watersheds

We simulated hydrological and biogeochemical responses to logging in a forested watershed to determine the vulnerability and/or resiliency of the forest ecosystems in the Lake Shumarinai Basin in northern Hokkaido, Japan. We used a biogeochemical model (PnET-CN) and a rainfall–runoff model (HYCYMODEL) to predict ecosystem responses. The PnET-CN model simulated well the observed NO₃ ⁻ concentrations in streamwater, particularly at high concentrations during snowmelt; however, the model could not simulate small increases in NO₃ ⁻ during the summer. By considering hydrological processes within the watershed and combining the model with the HYCYMODEL (PnET + HYCYMODEL), the seasonality of streamwater NO₃ ⁻ concentrations was better simulated. Using these models, the long-term effects of logging were simulated for coniferous, deciduous, and mixed forests. NO₃ ⁻ concentrations in streamwater increased in response to the logging disturbance in both coniferous and deciduous forests. In the coniferous forest, NO₃ ⁻ concentrations reached a maximum 10 years after logging, and high concentrations persisted for 30 years. In contrast, NO₃ ⁻ concentrations in the deciduous forest reached a maximum within 3–4 years and recovered to pre-disturbance levels after 15 years. We also used the models to determine the effects of different sizes and types (coniferous, deciduous, and mixed forest) of logging areas on Lake Shumarinai. The model results indicated that large areas of cutting require more than 100 years for complete lake recovery. Whereas the annual discharge to the lake minimally increased, the annual NO₃ ⁻ load greatly increased. Our simulation results elucidate the vulnerability and resiliency of forest ecosystems and provide valuable information for ecosystem management.     

An international comparative study of end-of-life vehicle (ELV) recycling systems

End-of-life vehicles (ELV) have become a global concern as automobiles have become popular worldwide. An international workshop was held to gather data and to discuss 3R policies and ELV recycling systems, their background and present situation, outcomes of related policies and programs, the framework of recycling and waste management, and case studies on related topics in several countries and regions, as well as the essential points of the comparison. Legislative ELV recycling systems are established in the EU, Japan, Korea, and China, while in the US, ELV recycling is managed under existing laws on environmental protection. Since automobile shredding residue (ASR) has a high calorific value and ash content, and includes heavy metals as well as a mass of unclassified fine particles, recycling ASR is considered highly difficult. Countries with a legislative ELV system commonly set a target for recovery rates, with many aiming for more than 95 % recovery. In order to reach this target, higher efficiency in ASR recovery is needed, in addition to material recycling of collectable components and metals. Environmentally friendly design was considered necessary at the planning and manufacturing stages, and the development of recycling systems and techniques in line with these changes are required for sound ELV management.     

Residues of 2,4‐D in air samples from Saskatchewan: 1966–1975

Abstract

Residues of 2,4‐D (2,4‐dichlorophenoxyacetic acid) in air samples from several sampling sites in central and southern Saskatchewan during the spraying seasons in the 1966–68 and 1970–75 periods were determined by gas‐liquid Chromatographic techniques. Initially, individual esters of 2,4‐D were characterized by retention times and confirmed further by co‐injection and dual column procedures. Since 1973, however, only total 2,4‐D acid levels in air samples have been determined after esterification to the methyl ester and confirmed by gc/ms techniques whenever possible.

Up to 50% of the daily samples collected during the spraying season at any of the locations and during any given year contained 2,4‐D, with butyl esters being found most frequently. The daily 24‐hr mean atmospheric concentrations of 2,4‐D ranged from 0.01 to 1.22 μg/m³, 0.01 to 13.50 μg/m³, and 0.05 to 0.59 μg/m for the iso‐propyl, mixed butyl and iso‐octyl esters, respectively. Even when the samples were analysed for the total 2,4‐D content, i.e. from 1973 onwards, the maximum level of the total acid reached only 23.14 μg/m. In any given year and at any of the sampling sites, about 30% of the samples contained less than 0.01 μg/m³ of 2,4‐D. In another 40% of the samples, the levels of 2,4‐D ranged from 0.01 to 0.099 yg/m. Only about 30% of the samples contained 2,4‐D concentrations higher than 0.1 μg/m³, with only 10% or less exceeding 1 μg/m³.

None of the samples, obtained with the high volume particu‐late sampler, showed any detectable levels of 2,4‐D, indicating little or no transport of 2,4‐D adsorbed on dust particles or as crystals of amine salts.