Cascade utilization of water chestnut: recovery of phenolics, phosphorus, and sugars

Overgrowth of aquatic plants, such as water chestnut, has been reported as a regional problem in various areas. We proposed cascade utilization of water chestnut through the recovery of phenolics, phosphorus, and sugars. Phenolics were extracted using 50 g (wet weight) of biomass with 300 mL of acetone, methanol, or hot water, and the yields of total phenolics were 80.2, 56.2, and 49.7 mg?g^?1 dry weight of native biomass, respectively. The rate of eluted phosphorus in the phenolic extraction step was 8.6, 14.8, and 45.3 % of that in the native biomass, respectively, indicating that the use of polar organic solvents suppressed phosphorus elution at the phenolic extraction step. Extraction of phosphorus following the phenolic extraction was combined with alkaline pretreatment (1 % NaOH solution) of biomass for saccharification; 64.1 and 51.0 % of phosphorus in the native biomass were extracted using acetone and methanol for the phenolic extraction, respectively. Saccharification following the alkaline pretreatment showed that the glucose recovery rates were significantly increased (p?<?0.05) with the phenolic extraction step compared to alkaline pretreatment alone. This finding indicates that extraction of phenolics not only provides another useful material but also facilitates enzymatic saccharification.     

Sonochemical degradation of 2,3,7,8-tetrachlorodibenzo-p-dioxins in aqueous solution with Fe(III)/UV system

2,3,7,8-Tetrachlorodibenzo-p-dioxin (2,3,7,8-TeCDD) was rapidly decreased by sonication in aqueous solution. The degradation efficiency was strongly influenced by ultrasonic power and reaction temperature. An initial 2,3,7,8-TeCDD concentration of 20 ng l(-1) was completely degraded within 60 min under sonochemical conditions using a 20 kHz frequency with a 150 W ultrasound power. The activation energy is 21.9 kJ/mol in the temperature range of 10-40 degrees C, suggesting a diffusion-controlled reaction. To increase the efficiency of 2,3,7,8-TeCDD treatment, degradation system combined ultrasound with Fe(III) (2 x 10(-4)mol l(-1)) and UV irradiation. Both UV and Fe(III) induced Fenton, Fenton-like and photo-Fenton reactions, leading to additional OH radicals and rapid 2,3,7,8-TeCDD removal.     

Photodechlorination of octachlorodibenzothiophene and octachlorodibenzofuran: comparison of experimental degradation pathways with degradation pathways predicted by DFT

Polychlorodibenzothiophenes (PCDTs) are sulfur analogues of polychlorodibenzofurans (PCDFs) and have been detected in environmental samples. We used density functional theory calculations (Gaussian 98W) to predict the photodechlorination pathways of octachlorodibenzothiophene (OCDT) and octachlorodibenzofuran (OCDF) in hexane, and we compared the predicted pathways with those observed during UV irradiation experiments. OCDT and OCDF were observed to degrade through first-order dechlorination processes, and the rate constant for OCDT was less than one-third that for OCDF. The main experimental photodechlorination pathways of OCDT and OCDF led to hexachlorinated and tetrachlorinated congeners, respectively; that is, the photodechlorination pathway of OCDT differed from that of OCDF. On the assumption that the dechlorination mechanisms involved radical reactions, we used DFT calculations to estimate bond-dissociation energies and single-point energies of OCDT and OCDF and their dechlorinated congeners, and we used the resulting information, along with hypotheses regarding the rate-controlling step of the degradations, to predict theoretical degradation pathways. We propose that reaction of dechlorinated radicals with a hydrogen donor was the rate-controlling step for OCDT and that C-Cl bond dissociation by UV light was the rate-controlling step for OCDF.     

Simplified heating time calculation using the Schmidt graphical method for PCB-contaminated capacitors undergoing the vacuum thermal recycling process

We discuss the use of the Schmidt graphical method to calculate the time required to heat a polychlorinated biphenyl (PCB)-contaminated capacitor in the vacuum thermal recycling process to the processing temperature of 400°C, and we evaluate the results of the heating time calculation by comparing the calculated values with the corresponding experimental values. The thermal conductivity and specific heat of the insulating paper and the carbonized paper in the capacitor were unknown, so we determined their values from experimental data obtained during the vacuum thermal recycling process. The capacitor element is a multilamination of aluminum foil and insulating paper, so we used an equation for a multilayer plane wall to calculate the value of the thermal conductivity. For the thermal conductivity and specific heat of the insulating paper impregnated with PCBs, we used values calculated from the mass ratios and thermal conductivities and specific heats of the individual materials. In addition, the physical properties vary according to the treatment because of the evaporation of PCBs and the carbonization of the insulating paper, so we modified the values of the thermal conductivity, specific heat, and density at the boiling point of the PCB and the carbonization point of the insulating paper before performing the calculations. Our calculated heating times were almost the same as, or were above, the experimental values, so we concluded that our method can be used as a simple calculation of the heating time.     

Current results and future perspectives for Japanese recycling of home electrical appliances

The Japanese system of recycling home electrical appliances has several unique aspects, including (1) a limited number of target appliances, (2) a recycling fee system that requires consumers to pay a recycling fee at the time of disposal, and (3) a direct recycling obligation for manufacturers, who have a physical, rather than a financial, responsibility for their end-of-life products. We studied data from 2001 to 2007 and found that the amount of four specified home electrical appliances and their materials that was recycled increased from about 319,249 tonnes in 2001 to about 447,262 tonnes—or 3.5 kg per inhabitant—in 2006. Recycling yield and development of recycling technologies have also improved. New recycling technologies have enabled a higher rate of material recycling of plastics (i.e., a closed-loop recycling). Improved eco-design, such as design for easier disassembly, has been promoted, and the higher quality of discarded appliances has enhanced the reuse market. Hazardous substances and fluorocarbons are being well managed. Problems with the recycling system include inelastic recycling fees, illegal dumping, illegal transfer by retailers, and the limited number of target appliances. Recycling fees could be reduced; this move might reduce the incidence of illegal dumping, as would engage stakeholders in collaborative efforts against illegal dumping. Illegal transfers could be reduced by improved traceability for retailers. Products such as liquid crystal displays, plasma display panels and clothes dryers have become increasingly common and should be also be targeted for recycling.     

Horizontal distribution of steroid estrogens in surface sediments in Tokyo Bay

A monitoring survey was conducted to investigate the distribution of steroid estrogens and their conjugates in surface sediments of Tokyo Bay for the first time, which is known as one of the most heavily polluted marine embayments in the world. The surface sediment samples were collected at 20 locations covering the whole area of Tokyo Bay and analyzed for steroid estrogens and their conjugates using liquid chromatography-tandem mass spectrometry. The concentrations of 17beta-estradiol (beta-E2) and estrone (E1) ranged from ND (below the detection limit; <0.07) to 0.59 and from 0.05 to 3.60 ng g-1 dry, respectively. Those concentrations were higher in the northern part of the bay, which is directly receiving huge quantities of pollutants from adjacent rivers containing a large amount of municipal and industrial wastewater. 17alpha-Estradiol (alpha-E2) and estrone-3-sulfate (E1-3S) were detected in some of the samples, whereas neither of the other conjugates, estriol (E3) or 17alpha-ethynylestradiol (EE2), was found.     

Non-degradable triazine substrates of atrazine and cyanuric acid hydrothermally and in supercritical water under the UV-illuminated photocatalytic cooperation

Strong oxidation by titanium dioxide photocatalysis can occur by photodegradation of organic contaminants in air and water. Some endocrine disruptors such as 2,4-dichlorophenoxy acetic acid (;;; ), 2,4-dichlorophenol (;;; ), nonylphenol (; ), bisphenol A (), diethyl phthalate (; ), etc. which can be neither biodegraded by bacteria nor degraded thermally can be degraded by TiO(2) photocatalytic treatment. However, incomplete photomineralization partly occurred, when TiO(2) photocatalytic degradation is employed for the treatment of certain endocrine disruptors. For example, no atrazine pesticide having triazine skeleton can be completely mineralized even by a photocatalytic procedure; the photodegradation of atrazine ultimately stops at the intermediate step of cyanuric acid, which cannot be photodegraded even after long illumination times ().In this study, the decomposition of atrazine and cyanuric acid was carried out with a device combining photocatalytic degradation in supercritical water (scH(2)O) or hydrothermal water (hyH(2)O). Atrazine and cyanuric acid can be degraded by the cooperation of either scH(2)O or hyH(2)O and UV illuminated TiO(2)-photocatalytic dispersed system under the fixed pressure of 23 MPa at 623 K or 683 K in a 120-ml Hastelloy batch reactor. The photocatalytic degradation method under high temperature and pressure has found appropriate for the photocatalytic oxidation of acetic acid and 2-chlorobiphenyl under continuous flow conditions at 160 degrees C and 20 atm (). In addition, the wet peroxide oxidation of PCBs by high temperature and pressure has been reported (). The main aims of this research are following. (i): the degradation of atrazine and cyanuric acid within the scH(2)O or hyH(2)O, (ii) the decomposition of atrazine and cyanuric acid catalyzed by TiO(2) particles under scH(2)O or hyH(2)O, and the synergistic effect for several reactions with TiO(2) and scH(2)O or hyH(2)O, and (iii) the mineralization yield of nitrogen and chlorine atoms concerning the chemical structures of atrazine or cyanuric acid (only nitrogen).     

mRNA expression of a cadmium-responsive gene is a sensitive biomarker of cadmium exposure in the soil collembolan Folsomia candida

The gene expression of environmental organisms is useful as a biomarker of environmental pollution. One of its advantages is high sensitivity. We identified the cDNA of a novel cadmium-responsive gene in the soil collembolan Folsomia candida. The deduced protein, designated “metallothionein-like motif containing protein” (MTC), was cysteine-rich and contained a metallothionein-like motif with similarity to metallothionein, but had a much longer sequence than metallothionein and contained repeated sequences of amino acids. Expression of MTC mRNA was sensitively induced by cadmium exposure at 0.3 mg/kg of dry food, a concentration at which toxic effects are not observed, but expression was not affected by γ-ray exposure (an inducer of oxidative stress). These findings suggest that MTC is involved in cadmium-binding processes rather than in oxidative-stress responses. In conclusion, we suggest that gene expression of MTC may be a candidate biomarker for detecting low levels of cadmium contamination in soil.     

Transport and transformation of sulfur compounds over East Asia during the TRACE-P and ACE-Asia campaigns

On the basis of the recently estimated emission inventory for East Asia with a resolution of 1×1°, the transport and chemical transformation of sulfur compounds over East Asia during the period of 22 February through 4 May 2001 was investigated by using the Models-3 Community Multi-scale Air Quality (CMAQ) modeling system with meteorological fields calculated by the regional atmospheric modeling system (RAMS). For evaluating the model performance simulated concentrations of sulfur dioxide (SO₂) and aerosol sulfate (SO₄²⁻) were compared with the observations on the ground level at four remote sites in Japan and on board aircraft and vessel during the transport and chemical evolution over the Pacific and Asian Pacific regional aerosol characterization experiment field campaigns, and it was found that the model reproduces many of the important features in the observations, including horizontal and vertical gradients. The SO₂ and SO₄²⁻ concentrations show pronounced variations in time and space, with SO₂ and SO₄²⁻ behaving differently due to the interplay of chemical conversion, removal and transport processes. Analysis of model results shows that emission was the dominant term in regulating the SO₂ spatial distribution, while conversion of SO₂ to SO₄²⁻ in the gas phase and the aqueous phase and wet removal were the primary factors that controlled SO₄²⁻ amounts. The gas phase and the aqueous phase have the same importance in oxidizing SO₂, and about 42% sulfur compounds (25% in SO₂) emitted in the model domain was transported out, while about 57% (35% by wet removal processes) was deposited in the domain during the study period.     

Readability of Characters on Mobile Phone Liquid Crystal Displays

Subject performance in reading characters on mobile phone liquid crystal displays was researched by using (a) English sentences with 3 or 4 different sizes of characters on 2 types of displays with different resolutions(n = 23; age = 31.0 ± 6.0 years), (b) Japanese characters in 3 different sizes and 2 types of font (n = 98; age = 44.5 ± 18.5 years), and (c) Japanese characters vertically enlarged 1—4 times (n = 120; age = 46.9 ± 18.6 years). Subjective evaluation, reading speed, number of reading errors, and viewing distance were recorded. Readability was higher with higher resolution displays, and with Gothic than with Mincho font in Japanese. Young subjects shortened the viewing distance as characters became smaller, whereas elderly subjects increased the viewing distance irrespective of the size of characters. Characters of 3–5 mm are appropriate for the young but inadequate for the elderly. Readability of Japanese characters improved when they were vertically enlarged to approximately twice the width.