Characterization of MAR and heavy metal-tolerant <Emphasis Type="Italic">E</Emphasis>. <Emphasis Type="Italic">coli</Emphasis> O157:H7 in water sources: a suggestion for behavioral intervention

The water sources in developing countries are usually contaminated with the members of enterobacteriaceae leading to gastrointestinal infections. There has been an increasing consumption of antibiotics during last decade in India. The development of multiple antibiotic resistance and heavy metal tolerance among waterborne bacteria has been coexisting traits. Keeping above features in view, 51 waterborne isolates of Escherichia coli O157:H7 have been characterized in the present study. The disk diffusion test for antibiotic sensitivity assay revealed that all the isolates were resistant to at least one or more antibiotics. Cephalosporins were least effective, while fluoroquinolones and aminoglycosides were most effective antibiotics. The isolates shared resistance pattern similarities regardless of their sources. The isolates were subjected to test maximum tolerance concentration of heavy metals such as arsenic, lead, chromium and mercury. About 98% isolates tolerated arsenic at 250 μg ml^?1 or various above concentrations. Mercury >25 μg ml^?1 was not tolerated by more than 90% isolates. In dug well, a commonly used water source in rural India, the isolates exhibited multiple antibiotic resistance index of 0.68 indicating it as high risk contaminating source. PCR–RFLP of 16S rDNA distinguished isolates into four groups with the smallest group represented by 3 isolates. Three isolates belonged to different sources but shared all the features of biochemical, serological, multiple antibiotic resistance and heavy metal tolerance test. 16S rDNA sequence analysis showed that the three selected isolates were closely related to each other. Based on the microbial and molecular findings, the study recommends to follow social cognitive theory to alter the behavior of the local communities for sustainable use of water resources.     

Optimal resource extraction and uncertainty about new technology

The optimal extraction policy of a known resource stock in an economy which has imperfect information about existence of a new technology is discussed. The optimal program is shown to depend on the remaining stock and the current information about existence of the new technology (which is updated every period). For two special forms of social welfare function, the optimal extraction policy is shown to be more conservative than in the situation of perfect information. The effects of improved information and greater availability of the known stock on the optimal extraction policy are also investigated.     

Lead induced spermatoxicity in mouse and MPG treatment

Protective efficacy of MPG (2-mercaptopropionyl glycine) was studied against the toxic effects of lead acetate in Swiss albino mice. The animals were treated with single dose of lead acetate @ 180, 200 and 250 mg/kg b.wt. in presence and absence of MPG. The results indicated that the body weight was slightly higher in MPG treated groups on day 10 as compared to only respective lead treated groups in all the three dose level. However, significantly lower body weight was observed in both lead treated and lead along with MPG treated groups as compared to control. Patten of mortality is similar in both lead treated and lead plus MPG treated groups. Conspicuous degenerative changes in testicular tissues and elevation in sperm head shape abnormality were observed in both lead treated and lead along with MPG treated groups but the sperm head shape abnormality and damage were more in lead treated groups as compared to lead plus MPG treated groups. But this difference was non-significant between the two groups. These observations suggest that MPG may not be significantly effective against lead induced damage in testicular tissues at cellular level. However, MPG is able to maintain slightly lower level of sperm abnormality in all the three dose level as compared to their respective lead treated groups. Further, studies are needed to find out the optimum dose of MPG for protection against the lower doses of lead induced lethality as MPG is not significantly effective against the higher doses of lead.     

Seasonal variations of natural ventilation and radon-222 exhalation in a slightly rising dead-end tunnel

The concentration activity of radon-222 has been monitored, with some interruptions, from 1997 to 2005 in the end section of a slightly rising, dead-end, 38-m long tunnel located in the Phulchoki hill, near Kathmandu, Nepal. While a high concentration varying from 6 x 10(3) Bq m(-3) to 10 x 10(3) Bq m(-3) is observed from May to September (rainy summer season), the concentration remains at a low level of about 200 Bq m(-3) from October to March (dry winter season). This reduction of radon concentration is associated with natural ventilation of the tunnel, which, contrary to expectations for a rising tunnel, takes place mainly from October to March when the outside air temperature drops below the average tunnel temperature. This interpretation is supported by temperature measurements in the atmosphere of the tunnel, a few meters away from the entrance. The temporal variations of the diurnal amplitude of this temperature indeed follow the ventilation rate deduced from the radon measurements. In the absence of significant ventilation (summer season), the radon exhalation flux at the rock surface into the tunnel atmosphere can be inferred; it exhibits a yearly variation with additional transient reductions associated with heavy rainfall, likely to be due to water infiltration. No effect of atmospheric pressure variations on the radon concentration is observed in this tunnel. This experiment illustrates how small differences in the location and geometry of a tunnel can lead to vastly different behaviours of the radon concentration versus time. This observation has consequences for the estimation of the dose rate and the practicability of radon monitoring for tectonic purposes in underground environments.     

Influence of sulfide (S2-) on preservation and speciation of inorganic arsenic in drinking water

Generally, H2SO4, HNO3, HCl or the combination of ethylenediaminetetraacetate with acetic acid (EDTA-HAc) have been used to preserve arsenite and arsenate species prior to analysis. When these acidic preservatives are added in sulfidic water, instantaneous precipitation of poorly crystalline orpiment, As2S3(am), occurs, thereby lowering the total arsenic, As(Tot), analysis. A new method for the determination of As(Tot) was developed in which acid-preserved sulfidic water samples were oxidized with NaOCl, converting As2S3(am) and thioarsenic species to arsenate. A new method was also developed for the separation of uncharged arsenite and charged thioarsenic species in fresh, unpreserved sulfidic water by adsorbing the charged thioarsenic species while allowing uncharged arsenite to pass through a strong-base resin unhindered. The adsorbed thioarsenic species could be eluted efficiently with 0.16 M NaOCl solution.     

Idle emissions from heavy-duty diesel vehicles: review and recent data

Heavy-duty diesel vehicle idling consumes fuel and reduces atmospheric quality, but its restriction cannot simply be proscribed, because cab heat or air-conditioning provides essential driver comfort. A comprehensive tailpipe emissions database to describe idling impacts is not yet available. This paper presents a substantial data set that incorporates results from the West Virginia University transient engine test cell, the E-55/59 Study and the Gasoline/Diesel PM Split Study. It covered 75 heavy-duty diesel engines and trucks, which were divided into two groups: vehicles with mechanical fuel injection (MFI) and vehicles with electronic fuel injection (EFI). Idle emissions of CO, hydrocarbon (HC), oxides of nitrogen (NOx), particulate matter (PM), and carbon dioxide (CO2) have been reported. Idle CO2 emissions allowed the projection of fuel consumption during idling. Test-to-test variations were observed for repeat idle tests on the same vehicle because of measurement variation, accessory loads, and ambient conditions. Vehicles fitted with EFI, on average, emitted approximately 20 g/hr of CO, 6 g/hr of HC, 86 g/hr of NOx, 1 g/hr of PM, and 4636 g/hr of CO2 during idle. MFI equipped vehicles emitted approximately 35 g/hr of CO, 23 g/hr of HC, 48 g/hr of NOx, 4 g/hr of PM, and 4484 g/hr of CO2, on average, during idle. Vehicles with EFI emitted less idle CO, HC, and PM, which could be attributed to the efficient combustion and superior fuel atomization in EFI systems. Idle NOx, however, increased with EFI, which corresponds with the advancing of timing to improve idle combustion. Fuel injection management did not have any effect on CO2 and, hence, fuel consumption. Use of air conditioning without increasing engine speed increased idle CO2, NOx, PM, HC, and fuel consumption by 25% on average. When the engine speed was elevated from 600 to 1100 revolutions per minute, CO2 and NOx emissions and fuel consumption increased by >150%, whereas PM and HC emissions increased by approximately 100% and 70%, respectively. Six Detroit Diesel Corp. (DDC) Series 60 engines in engine test cell were found to emit less CO, NOx, and PM emissions and consumed fuel at only 75% of the level found in the chassis dynamometer data. This is because fan and compressor loads were absent in the engine test cell.     

Maize straw and rice husk-derived biochars produced in a simple metal kiln: characteristics and effects on crop productivity in three fields

Journal of Material Cycles and Waste Management - Maize straw- and rice husk-derived biochars were produced in a simple metal kiln without automated control. Their characteristics and effects on...     

A review on recent progress in observations,sources, classification and regulations of PM<Subscript>2.5</Subscript> in Asian environments

Natural and human activities generate a significant amount of PM_2.5 (particles ≤2.5 μm in aerodynamic diameter) into the surrounding atmospheric environments. Because of their small size, they can remain suspended for a relatively longer time in the air than coarse particles and thus can travel long distances in the atmosphere. PM_2.5 is one of the key indicators of pollution and known to cause numerous types of respiratory and lung-related diseases. Due to poor implementation of regulations and a time lag in introducing the vehicle technology, levels of PM_2.5 in most Asian cities are much worse than those in European environments. Dedicated reviews on understanding the characteristics of PM_2.5 in Asian urban environments are currently missing but much needed. In order to fill the existing gaps in the literature, the aim of this review article is to describe dominating sources and their classification, followed by current status and health impact of PM_2.5, in Asian countries. Further objectives include a critical synthesis of the topics such as secondary and tertiary aerosol formation, chemical composition, monitoring and modelling methods, source apportionment, emissions and exposure impacts. The review concludes with the synthesis of regulatory guidelines and future perspectives for PM_2.5 in Asian countries. A critical synthesis of literature suggests a lack of exposure and monitoring studies to inform personal exposure in the household and rural areas of Asian environments.     

Forest Cover Change,Physiography, Local Economy,and Institutions in a Mountain Watershed in Nepal

This study assessed changes in forest cover in a mountain watershed in central Nepal between 1976 and 2000 by comparing classified satellite images coupled by GIS analyses, and examined the association of forest change with major physiographic, economic, and local forest governance parameters. The results showed an increase in forested area (forest plus shrublands) by 7.6% during 1976–2000. Forest dynamism (changes including improvement, deterioration, gain, and loss) was highest in low-elevation, south-facing and less-steep slopes that were closer to roads. Proportionately the highest net improvement and gain to forested area also took place in those locations. Forest degradation occurred at twice the rate of improvement in high elevation areas (> 2300 m). Forests located in urban and semiurban areas (i.e., a market-oriented economy) experienced a proportionately higher amount of net improvement and gain than forests in rural areas (i.e., a subsistence economy). Among the three governance arrangements, proportionately the highest net improvement and gain took place in semigovernment forests (forested area legally under the forest department but with de facto control and claim of ownership by local communities and/or municipality) followed by formalized community forests (including leasehold). Government forests, which were mostly found in the southern high mountains and had virtually open access, remained relatively stable during the study period. Over 50% of the watershed forests have not come under community-based management despite favorable policy and more than two decades of government intervention with continuous donor support. The findings indicate that the present one size fits all approach of community forest handover policy in Nepal needs rethinking to accommodate biophysical and socioeconomic variations across the country.     

Physicochemical and microbiological assessment of recreational and drinking waters

The present study was aimed to make an assessment of health risk due to pollution and human pathogenic bacteria associated with the recreational and drinking water sources in twin densely populated holy Indian cities Ayodhya and Faizabad. Though physicochemical studies revealed that the water available in the area is under recommended limits for human use, it is unsafe on account of poor microbiological quality of surface and ground water in the region. The most probable number (MPN) test results revealed the preponderance of ≥2,400 total coliforms (TC) (100 ml)^− 1 in river, pond, dug well and kund waters. Contrary to that, 94% tube wells, 32% hand pumps and 25% piped supply water were under safe limits having <3 TC (100 ml)^− 1. The shallow depth (~40 ft), water logging and presence of septic tanks in the near vicinity are the possible reasons of poor microbial quality of hand pump drinking water. The municipal supply water passes along sewage line where loose connections and/or cracks in pipe lead to mixing and contamination. The significant best quality of tube well water evident from the absence of TC could be attributed to the depth of well ≥150 ft and usually their location away from the habitation. A total of 263 bacteria from 186 water samples were isolated, and at least five genera of enteric bacteria from various water sources were identified morphologically and biochemically as Escherichia coli, Klebsiella sp., Enterobacter sp., Shigella sp. and Salmonella sp. The serotyping of 72 E. coli and 36 Salmonella sp. revealed 51 as E. coli O157 and 20 as Salmonella sp. The presence of enteric pathogens in water sources pose threat to human health and therefore call for immediate remedial measures.