Influence of micropile parameters on bearing capacity of footings

Environmental Science and Pollution Research - Micropiles, on account of their versatility, can serve as both a new foundation and a long-term option for prevailing foundations without disturbing...     

Performance evaluation of a decentralized wastewater treatment system in India

A Decentralized Wastewater Treatment System (DEWATS) provides an economically feasible and efficient wastewater treatment solution especially in developing countries. It has an enormous potential for developing a sustainable environmental sanitation system. In this study, the treatment efficiency of eight DEWATS plants was evaluated in the state of Maharashtra, India, for their performance in terms of selected physico-chemical parameters of the wastewater. Although the efficiency of some of the plants was lower than that reported in literature, the effluent quality of all the plants was within the permissible discharge limits of the Central Pollution Control Board for all the parameters. Comprehensive assessment of Plant I was carried in terms of its technical and socio-economic aspects. Moreover, LCA tool has been utilized to evaluate the environmental impacts of the operation stage of DEWATS. The midpoint, CML 2001 (April 2015) methodology was adopted, in which 11 impact categories were considered. From the life cycle impact assessment and interpretation, the main impacts are identified as releases of COD, P-PO₄^3?, and N-NH₄⁺ to water bodies and disposal of sludge. Due to negligible energy consumption, the operation stage was found to be less damaging to the environment. It was concluded that DEWATS can be a good alternative for treating wastewater with negligible energy and chemical consumption.

     

Analysis of polychlorobiphenyls from used transformers for polychlorodibenzofurans

The results of analyses for polychlorodibenzofuran (PCDF) content in two samples of polychlorobiphenyl (PCB) from used electrical transformers are presented and discussed. In neither sample was there evidence for enhanced PCDF concentrations even though one of them had been subjected to overheating while in service.     

Polychlorodibenzo-p-dioxins and dibenzofurans in technical pentachlorophenol - results of a collaborative analytical exercise

Results of analyses of eight samples of technical pentachlorophenol conducted by three different analytical methods are presented and discussed.     

Study of solubility of isoproturon by its complexation with beta-cyclodextrin

The inclusion complexes of beta-cyclodextrin-isoproturon were prepared using techniques such as kneading, co-evaporation, and co-precipitation. These complexes were characterised for physical properties and spectral studies such as UV, FTIR, and 1HNMR spectroscopy. To investigate the stoichiometry of the complexes Phase solubility method was adopted. Most of the complexes showed an increase in the dissolution rate of the herbicide. The best results were obtained when inclusion complexes were prepared by co-precipitation and co-evaporation method. Findings of this paper will allow the rational use of isoproturon with increase in its efficacy.     

Eutrophication Status of Marine Environment of Mumbai and Jawaharlal Nehru Ports

The marine environment of Mumbai and Jawaharlal Nehru ports was monitored for some environmental and biological parameters during three different periods between 2001 and 2002. The results are compared with the records available since 1960s. With the passage of time the environmental status underwent changes, probably due to the increase in anthropogenic activities in the metropolis. The nutrient level especially the nitrate concentration has increased gradually over the years with a simultaneous decrease in dissolved oxygen, indicating increase in the biological activity. Characterization of this environment based on Assessment of Estuarine Trophic Status (ASSETS) model indicates that the current status is poor and may get worsen in future if no appropriate management policies are put into place.     

Effect of injection timing,injector opening pressure and nozzle geometry on the performance of a compression ignition engine operated on non-edible oil methyl esters from different sources

Increasing cost of fossil fuels, environmental threats from exhaust emissions and their depleting nature have generated intense international interest in developing renewable and alternative fuels for internal combustion engines. This study investigates the suitability of different non-edible-derived biodiesels such as cottonseed oil methyl ester (COME), honne oil methyl ester (HnOME) and honge oil methyl ester (HOME) to four-stroke, single-cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel injection timing (IT), fuel injector opening pressure (IOP) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and HOME in the modified CI engine. IT was varied from 19° to 27° before top dead centre (bTDC) in steps of 4° bTDC; IOP was varied from 205 to 240 bar in steps of 10 bar. Nozzle injectors of three to five holes, each of 0.3 mm size, were selected for the study. It was concluded that a retarded IT of 19° bTDC increased IOP of 230 bar, and four-hole nozzle injector of 0.3 mm size resulted in overall better engine performance with increased brake thermal efficiency and reduced hydrocarbon and carbon monoxide smoke emissions for the fuels tested.     

Long term changes in polychlorodibenzo-p-dioxin concentrations in wood treated with technical pentachlorophenol

Wood samples treated with technical pentachlorophenol (PCP), technical sodium pentachlorophenoxide (NaPCP) and octachlorodibenzo-p-dioxin have been exposed outdoors for periods up to $\text{2}\text{1}\text{2}$ years. Analysis of extracts from the samples show that photolytic reductive dechlorination of highly chlorinated dibenzo-p-dioxins to less chlorinated isomers occurs. However there is no discernible increase in polychlorodibenzo-p-dioxin concentrations in the technical PCP treated wood presumably because further photolytic reactions and volatilisation compete effectively with the photolytic formation. There is no evidence for formation of octachlorodibenzo-p-dioxin (OCDD) in technical PCP treated wood in this study, probably because photolytic destruction and volatilisation compete effectively with formation reactions when the initial OCDD concentration is relatively high.     

Butyltins in water, biofilm, animals and sediments of the west coast of India

Biofilm, fish, oyster, mussel, clam, surface seawater, suspended particulate matter (SPM), and sediment samples were collected from marine and/or estuarine waters of the west coast of India. These samples were analysed for butyltin derivatives such as dibutyltin (DBT) and tributyltin (TBT). The concentrations DBT plus TBT varied between 2.4 and 8.3, 163 and 363 ng/l, 5 and 2853 ng/g dry wt in the SPM, seawater and sediment samples, respectively, of the Marmugao harbour. The values of DBT plus TBT ranged between 0.60 and 29, 123 and 242 ng/l and 1.4 and 65 ng/g dry wt in SPM, water and sediment samples, respectively, collected from the Mandovi estuary. In the Dona Paula Bay the DBT plus TBT varied from 10 to 89 ng/l in surface seawater, and TBT from 10 to 513 ng/g in biofilm samples. For the coastal sediment samples the concentration of DBT plus TBT ranged between 36 and 133 ng/g dry wt of sediment. For the animal samples the DBT plus TBT ranged between 58 and 825 ng/g dry wt of the tissue. Mussel tissues contained the highest amount of DBT plus TBT (825 ng/g dry wt tissue), whereas highest TBT concentration was recorded in the oyster (732 ng/g dry wt). TBT was generally the most abundant butyltin compound in most of the samples suggesting fresh inputs and/or less degradation of TBT. A wide range of the observed butyltin concentrations suggests the presence of localized areas of contamination. Leaching of tributyltin-containing antifouling paints from the ocean going ships, fishing and recreational boats, barges, and the inputs of TBT from the Goa shipyard and dry dock facility situated in the harbour are the probable sources of the DBT and TBT in the samples of the west coast of India. Higher levels of TBT were observed in biofilm relative to that in the surrounding seawater. When fed on TBT contaminated biofilm of the diatom Navicula subinflata, butyltin concentrations in the clam Paphia malabarica increased over the period of feeding suggesting the importance of biofilm in the transfer of butyltins to higher group of organisms.