Environmental and Biological Assessment of Exposure to Benzene in Petroleum Workers

Occupational exposure to benzene was measured in two gasoline marketing terminals and five major refineries in Singapore. A total of 280 workers were monitored over two years. This assessment was carried out with two primary objectives: (1) To find out the extent of occupational exposure to benzene in the petroleum industry in Singapore, (2) To identify suitable biomarkers for monitoring of low levels of benzene exposure. The exposure was measured in five different categories of petroleum and petrochemical workers, i.e., truck drivers, despatch assistant, process operators, oil movements operators and laboratory technicians. The results revealed wide variations in exposure, from 0.01 to 13.6 ppm for personal time weighted average (TWA) exposure over the whole workshift. The exposure of truck drivers appeared to be the highest, with geometric mean (GM) of 1.98 ppm (ranged from 0.25 to 13.6 ppm). The average benzene exposure for process operators was relative low with a GM of 0.04 ppm. Lowest benzene exposure was found in the laboratory technicians, with a GM of 0.02 ppm. As cigarette smoking is known to affect metabolism of benzene, data analyses on the relationships with environmental exposure were conducted only on the 190 nonsmokers. The results showed that urinary trans, trans-muconic acid (ttMA), unmetabolized benzene in urine (UBZ) and benzene in blood (BBZ) were better biomarkers for low level benzene exposure as compared to urinary phenolic metabolites in urine, such as hydroquinone, phenol and catechol.     

A simple method for the extraction of mutagens from airborne particles

Organic materials were extracted with acetone from filters of airborne particles by soaking, shaking, soxhletion, and sonication. These extracts were tested with and without S9 for mutagenicity using Ames assay and arabinose-resistant assay of Salmonella typhimurium. Among the extraction methods, soaking extract had the highest mutagenic activity followed by sonication, shaking, and soxhletion in both the assays. With the samples studied, it was concluded that soaking with acetone for 1/2 hr is the simplest and an efficient procedure for the extraction of mutagens from airborne particles.Results of cooperative investigation of NIOSH and West Virginia Agricultural and Forstry Experimental Station. Published with the approval of the Director of the West Virginia Agricultural and Forestry Experiment Station as Scientific Paper No. 1822.     

An investigation on biological stability of product water generated by lab-scale and pilot-scale distillation systems

Material Disposal Area G is the primary low-levelradioactive waste disposal site at Los Alamos NationalLaboratory, New Mexico, and is adjacent to Pueblo of SanIldefonso lands. Pueblo residents and Los Alamos scientists areconcerned about radiological doses resulting from uptake of AreaG radionuclides by mule deer (Odocoileus hemionus) andRocky Mountain elk (Cervus elaphus), then consumption ofdeer and elk meat by humans. Tissue samples were collected fromdeer and elk accidentally killed near Area G and were analyzedfor ³H, ⁹⁰Sr, total U, ²³⁸Pu, ^{239, 240}Pu,²⁴¹Am, and ¹³⁷Cs. These data were used to estimatehuman doses based on meat consumption of 23 kg y^-1. Humandoses were also modeled using RESRAD, and dose rates to deer andelk were estimated with a screening model. Dose estimates tohumans from tissue consumption were 2.9 × 10^-3 mSv y^-1and 1.6 × 10^-3 mSv y^-1 from deer and elk, respectively,and RESRAD dose estimates were of the same order of magnitude. Estimated dose rates to deer and elk were 2.1 × 10^-4 mGyd^-1 and 4.7 × 10^-4 mGy d^-1, respectively. Allestimated doses were significantly less than established exposurelimits or guidelines.     

Isolation and identification of potential fungal species for spent engine lubrication oil remediation in Peninsular Malaysia

Improper disposal and spills of spent engine oil into the environment can result in contamination, which eventually affects humans through the food chain. Mycoremediation is an effective and inexpensive alternative to clean up spent engine oil contamination. In recent work, the potential effectiveness of fungi for degrading spent engine oil was confirmed, with the species identified through molecular identification. Fungi that were able to grow in Bushnell Haas Broth supplied with spent engine oil were identified with the potential to utilize spent engine oil as a carbon source. Six species of fungi namely Penicillium simplicissimum, Aspergillus nidulans, Aspergillus niger, Trichoderma longibrachiatum, Aspergillus ustus, and Aspergillus flavus were successfully identified in this study. Over a course of seven days, P. simplicissimum (21.11 percent) was identified as the most effective fungi in degrading spent engine oil, followed by A. nidulans (17.75 percent), A. niger (15.85 percent), T. longibrachiatum (15.12 percent), A. ustus (15.02 percent), and A. flavus (11.80 percent). As these species of fungi were isolated from the natural environment in Peninsular Malaysia, the potential of using these fungi as mycoremediation of spent engine oil was therefore confirmed.     

Accumulation of heavy metals in native Andean plants: potential tools for soil phytoremediation in Ancash (Peru)

Metal contamination is a recurring problem in Peru, caused mainly by mine tailings from a past active mining activity. The Ancash region has the largest number of environmental liabilities, which mobilizes high levels of metals and acid drainages into soils and freshwater sources, posing a standing risk on human and environmental health. Native plant species spontaneously growing on naturally acidified soils and acid mine tailings show a unique tolerance to high metal concentrations and are thus potential candidates for soil phytoremediation. However, little is known about their propagation capacity and metal accumulation under controlled conditions. In this study, we aimed at characterizing nine native plant species, previously identified as potential hyperaccumulators, from areas impacted by mine tailings in the Ancash region. Plants were grown on mine soils under greenhouse conditions during 5 months, after which the concentration of Cd, Cu, Ni, Pb, and Zn was analyzed in roots, shoots, and soils. The bioaccumulation (BAF) and translocation factor (TF) were calculated to determine the amount of each metal accumulated in the roots and shoots and to identify which species could be better suited for phytoremediation purposes. Soil samples contained high Cd (6.50–49.80 mg/kg), Cu (159.50–1187.00 mg/kg), Ni (3.50–8.70 mg/kg), Pb (1707.00–4243.00 mg/kg), and Zn (909.00–7100.00 mg/kg) concentrations exceeding national environmental quality standards. After exposure to mine tailings, concentrations of metals in shoots were highest in Werneria nubigena (Cd, 16.68 mg/kg; Cu, 41.36 mg/kg; Ni, 26.85 mg/kg; Zn, 1691.03 mg/kg), Pennisetum clandestinum (Pb, 236.86 mg/kg), and Medicago lupulina (Zn, 1078.10 mg/kg). Metal concentrations in the roots were highest in Juncus bufonius (Cd, 34.34 mg/kg; Cu, 251.07 mg/kg; Ni, 6.60 mg/kg; Pb, 718.44 mg/kg) and M. lupulina (Zn, 2415.73 mg/kg). The greatest BAF was calculated for W. nubigena (Cd, 1.92; Cu, 1.20; Ni, 6.50; Zn, 3.50) and J. bufonius (Ni, 3.02; Zn, 1.30); BCF for Calamagrostis recta (Cd, 1.09; Cu, 1.80; Ni, 1.09), J. bufonius (Cd, 3.91; Cu, 1.79; Ni, 18.36), and Achyrocline alata (Ni, 137; Zn, 1.85); and TF for W. nubigena (Cd, 2.36; Cu, 1.70; Ni, 2.42; Pb, 1.17; Zn, 1.43), A. alata (Cd, 1.14; Pb, 1.94), J. bufonius (Ni, 2.72; Zn, 1.63), and P. clandestinum (Zn, 1.14). Our results suggest that these plant species have a great potential for soil phytoremediation, given their capability to accumulate and transfer metals and their tolerance to highly metal-polluted environments in the Andean region.     

Economic and Environmental Benefits of Using Hardwood Sawmill Waste as a Raw Material for Particleboard Production

Annually, sawmills and other wood-processing factories generate a significant amount of scrap materials which are sent to landfills or incinerated. The amount of residue generated in Australia annually is estimated at 200,000 tonnes. A research project conducted at RMIT University explored utilizing these waste materials as particleboard furnish. The research team has now established a methodology for making particleboard in the laboratory using 100% hardwood sawmill residues, developing a particleboard product made in the laboratory which has acceptable mechanical properties and density profiles in accordance with the Australian Standards. However, this board product has some perceived issues which have been hindering ready commercial uptake. The current product requires a 10% higher resin load, has a 10% higher board density, and requires 10% longer pressing times compared to normal softwood particleboard. The paper presents an analysis of the current production process of particleboard to investigate the economic feasibility of particleboard production using hardwood sawmill residues. A major challenge in the analysis is converting the environmental benefit of utilizing large quantities of sawmill residue to a monetary term. Investigation of the global impact of particleboard by considering emission of carbon dioxide to the atmosphere is also included. A comparison is presented between different methods of disposing wood residues to understand the environmental benefit of using hardwood residue in particleboard.     

2Loud?: Community mapping of exposure to traffic noise with mobile phones

Despite ample medical evidence of the adverse impacts of traffic noise on health, most policies for traffic noise management are arbitrary or incomplete, resulting in serious social and economic impacts. Surprisingly, there is limited information about citizen’s exposure to traffic noise worldwide. This paper presents the 2Loud? mobile phone application, developed and tested as a methodology to monitor, assess and map the level of exposure to traffic noise of citizens with focus on the night period and indoor locations, since sleep disturbance is one of the major triggers for ill health related to traffic noise. Based on a community participation experiment using the 2Loud? mobile phone application in a region close to freeways in Australia, the results of this research indicates a good level of accuracy for the noise monitoring by mobile phones and also demonstrates significant levels of indoor night exposure to traffic noise in the study area. The proposed methodology, through the data produced and the participatory process involved, can potentially assist in planning and management towards healthier urban environments.     

Bioaccumulation and depuration of anthracene in Penaeus monodon (Fibricius) through food ingestion

Understanding on the bioaccumulation and depuration of PAHs (polycyclic aromatic hydrocarbons) in Penaeus monodon is important in seafood safety because it is one of the most popular seafood consumed worldwide. In this study, we used anthracene as the precursor compound for PAHs accumulation and depuration in the shrimp. Commercial feed pellets spiked with anthracene were fed to P. monodon. At 20 mg kg⁻¹ anthracene, P. monodon accumulated 0.1% of the anthracene from the feed. P. monodon deputed the PAH two times faster than its accumulation. The shrimp reduced its feed consumption when anthracene content in the feed exceeded 20 mg kg⁻¹. At 100 mg kg⁻¹ anthracene, P. monodon started to have necrosis tissues on the posterior end of their thorax. The bioaccumulation factor (BAF), uptake rate constant (k₁) and depuration rate constant (k₂) of anthracene in P. monodon were 1.15 × 10⁻³, 6.80 × 10⁻⁴ d⁻¹ and 6.28 × 10⁻¹ d⁻¹, respectively. The depuration rate constant is about thousand times higher than the uptake rate constant and this indicated that this crustacean is efficient in depurating hydrocarbons from their tissue.     

Effect of mean cell residence time on the performance and microbial diversity of pre-denitrification submerged membrane bioreactors

The effect of mean cell residence time (MCRT) (5, 8.3, 16.7, and 33.3d) on domestic wastewater treatment performance had been investigated using four bench-scale pre-denitrification submerged membrane bioreactors (MBR) operated in parallel. The 33.3-d MCRT MBR had the lowest microbial activities in terms of specific oxygen uptake rate, specific denitrification rate and observed sludge yield. Excellent COD removal efficiency (more than 95%) and nitrification (more than 97%) were observed in all the four MBRs investigated. Even though high nitrification can be achieved in all the MBRs, total nitrogen (TN) removal efficiency was found to be affected by MCRT with a maximum of 77% at 33.3-d MCRT. Better TN removal efficiency achieved in the 33.3-d MCRT MBR was due to the combined effect of high mixed liquor concentration and lower dissolved oxygen concentration in the recycled mixed liquor. A comparison of terminal-restriction fragment length polymorphisms (T-RFLP) fingerprints based on 16S rRNA and nirS gene revealed that the microbial communities of 5- and 8.3-d MCRT are grouped under the same branch while 16.7- and 33.3-d MCRT are grouped in another branch. T-RFLP based on amoA gene shows that members from the Nitrosomonas genus were more dominant under shorter MCRT operating environment. Clustering analysis did not show any correlation with the organic and nitrogen removal performance obtained in this study.