Performance evaluation of a continuous flow photocatalytic reactor for wastewater treatment

A novel photocatalytic reactor for wastewater treatment was designed and constructed. The main part of the reactor was an aluminum tube in which 12 stainless steel circular baffles and four quartz tube were placed inside of the reactor like shell and tube heat exchangers. Four UV–C lamps were housed within the space of the quartz tubes. Surface of the baffles was coated with TiO₂. A simple method was employed for TiO₂ immobilization, while the characterization of the supported photocatalyst was based on the results obtained through performing some common analytical methods such as X-ray diffraction (XRD), scanning electron microscope (SEM), and BET. Phenol was selected as a model pollutant. A solution of a known initial concentration (20, 60, and 100 ppmv) was introduced to the reactor. The reactor also has a recycle flow to make turbulent flow inside of the reactor. The selected recycle flow rate was 7?×?10^?5 m³.s^?1, while the flow rate of feed was 2.53?×?10^?7, 7.56?×?10^?7, and 1.26?×?10^?6 m³.s^?1, respectively. To evaluate performance of the reactor, response surface methodology was employed. A four-factor three-level Box–Behnken design was developed to evaluate the reactor performance for degradation of phenol. Effects of phenol inlet concentration (20–100 ppmv), pH (3–9), liquid flow rate (2.53?×?10^?7?1.26?×?10^?6 m³.s^?1), and TiO₂ loading (8.8–17.6 g.m^?2) were analyzed with this method. The adjusted R ² value (0.9936) was in close agreement with that of corresponding R ² value (0.9961). The maximum predicted degradation of phenol was 75.50 % at the optimum processing conditions (initial phenol concentration of 20 ppmv, pH?～?6.41, and flow rate of 2.53?×?10^?7 m³.s^?1 and catalyst loading of 17.6 g.m^?2). Experimental degradation of phenol determined at the optimum conditions was 73.7 %. XRD patterns and SEM images at the optimum conditions revealed that crystal size is approximately 25 nm and TiO₂ nanoparticles with visible agglomerates distribute densely and uniformly over the surface of stainless steel substrate. BET specific surface area of immobilized TiO₂ was 47.2 and 45.8 m² g^?1 before and after the experiments, respectively. Reduction in TOC content, after steady state condition, showed that maximum phenol decomposition occurred at neutral condition (pH?～?6). Figure

The schematic view of the experimental set-up     

Surface runoff and nitrogen (N) loss in a bamboo (Phyllostachys pubescens) forest under different fertilization regimes

Nitrogen (N) losses from agricultural fields have been extensively studied. In contrast, surface runoff and N losses have rarely been considered for bamboo forests that are widespread in regions such as southern China. The thriving of bamboo industries has led to increasing fertilizer use in bamboo forests. In this study, we evaluated surface runoff and N losses in runoff following different fertilization treatments under field conditions in a bamboo (Phyllostachys pubescens) forest in the catchment of Lake Taihu in Jiangsu, China. Under three different fertilization regimes, i.e., control, site-specific nutrient management (SSNM), and farmer's fertilization practice (FFP), the water runoff rate amounted to 356, 361, and 342 m³?ha^?1 and accounted for 1.91, 1.98, and 1.85 % of the water input, respectively, from June 2009 to May 2010. The total N losses via surface runoff ranged from 1.2 to 1.8 kg?ha^?1. Compared with FFP, the SSNM treatment reduced total nitrogen (TN) and dissolved nitrogen (DN) losses by 31 and 34 %, respectively. The results also showed that variations in N losses depended mainly on runoff fluxes, not N concentrations. Runoff samples collected from all treatments throughout the year showed TN concentrations greater than 0.35 mg?L^?1, with the mean TN concentration in the runoff from the FFP treatment reaching 8.97 mg?L^?1. The loss of NO₃ ^?–N was greater than the loss of NH₄ ⁺–N. The total loss of dissolved organic nitrogen (DON) reached 23–41 % of the corresponding DN. Therefore, DON is likely the main N species in runoff from bamboo forests and should be emphasized in the assessment and management of N losses in bamboo forest.     

Polylactic acid synthesis,biodegradability, conversion to microplastics and toxicity: a review

Global pollution by plastics derived from petroleum has fostered the development of carbon–neutral, biodegradable bioplastics synthesized from renewable resources such as modern biomass, yet knowledge on the impact of bioplastics on ecosystems is limited. Here we review the polylactic acid plastic with focus on synthesis, biodegradability tuning, environmental conversion to microplastics, and impact on microbes, algae, phytoplankton, zooplankton, annelids, mollusk and fish. Polylactic acid is a low weight semi-crystalline bioplastic used in agriculture, medicine, packaging and textile. Polylactic acid is one of the most widely used biopolymers, accounting for 33% of all bioplastics produced in 2021. Although biodegradable in vivo, polylactic acid is not completely degradable under natural environmental conditions, notably under aquatic conditions. Polylactic acid disintegrates into microplastics faster than petroleum-based plastics and may pose severe threats to the exposed biota.

     

Application of generalized link functions in developing accident prediction models

The Bayesian Poisson–Gamma hierarchy, leading to the negative binomial distribution, has been the standard practice in developing accident prediction models. To linearize the relationship connecting the mean of the negative binomial distribution to relevant covariates, a canonical log link has traditionally been used. Typically, little information is available regarding the choice of a particular link. To avoid link misspecification, it is proposed to nest the canonical log link model within a generalized link family and subsequently use the full Bayes method for parameter estimation, performance evaluation and inference. The proposed approach was applied to a sample of accident and traffic volume data corresponding to 99 intersections in the city of Edmonton, Alberta. The results showed that both the generalized link model and the traditional canonical link model provided adequate fit to the data. However, the Bayes factor provided a clear statistical support for the use of the generalized link approach. A procedure for link validation is also described. It allows the users (e.g., road authorities) to consider the changes in predicted accidents that will result if a generalized link is used instead of a canonical link. If a certain maximal change is tolerated, the canonical link can be used to analyze the data; otherwise the generalized link is worth the extra efforts and should be adopted. When compared with the traditional approach, the generalized link model was found to predict a lower number of accidents whenever there is a heavy traffic at the major approach, especially if combined with light flow on the minor approach. The paper concludes by identifying out areas for further research.     

How economics can further the success of ecological restoration

Restoration scientists and practitioners have recently begun to include economic and social aspects in the design and investment decisions for restoration projects. With few exceptions, ecological restoration studies that include economics focus solely on evaluating costs of restoration projects. However, economic principles, tools, and instruments can be applied to a range of other factors that affect project success. We considered the relevance of applying economics to address 4 key challenges of ecological restoration: assessing social and economic benefits, estimating overall costs, project prioritization and selection, and long‐term financing of restoration programs. We found it is uncommon to consider all types of benefits (such as nonmarket values) and costs (such as transaction costs) in restoration programs. Total benefit of a restoration project can be estimated using market prices and various nonmarket valuation techniques. Total cost of a project can be estimated using methods based on property or land‐sale prices, such as hedonic pricing method and organizational surveys. Securing continuous (or long‐term) funding is also vital to accomplishing restoration goals and can be achieved by establishing synergy with existing programs, public–private partnerships, and financing through taxation.     

A review on efficient electromagnetic interference shielding materials by recycling waste—a trio of land to lab to land concept

Environmental Science and Pollution Research - The materials used in electrical and electronic applications have great importance and broader applications, but they have severe electromagnetic...     

Vacuum pyrolysis of polymeric wastes containing hazardous cyano groups

Vacuum pyrolysis of polymeric wastes containing hazardous cyano groups was studied using low temperature pyrolysis mass spectrometry. Specifically, the study analyzed the presence of toxic compounds among the pyrolysis products. The polymers were pyrolyzed directly in the solid probe of a quadruple mass spectrometer within an ion source at a pressure of 10^?6 Torr and then sorted by quadrupole mass analyzer. Polyethyl cyanoacrylate degrades by depolymerization, mostly into the ethyl cyanoacrylate monomer units. The degradation of polyurethane produces nonpolymeric urethane, isocyanates, amines and ethers. Polyacrylonitrile degrades via a depolymerization pathway into oligonitriles, acrylonitrile, ammonia and hydrogen cyanide.     

Sequential fractionation of phosphorus in sediments of El-Fayum lakes—Egypt

The amounts and forms of potentially mobile phosphorus (P) in surface sediments of Qarun and Wadi El-Rayan lakes were evaluated during winter and summer using a sequential chemical extraction. Five sedimentary P fractions were separately quantified: loosely sorbed P (NH₄Cl-P), iron-associated P (BD-P), calcium- bound P (HCl-P), metal oxide bound P (NaOH-P), and residual P (organic and refractory P). The results indicated that the fractional composition of the examined lakes was different while the total P concentrations were approached. The inorganic P in the surface sediment mainly consisted of Ca-P followed by Fe-P in Qarun Lake, while Al-P took the second order in Wadi El-Rayan lakes. The ranks order of the different P extracts were HCl-P > residual-P ≈ NaOH-P > NH₄Cl-P > BD-P and residual-P > NH₄Cl-P > HCl-P > NaOH-P > BD-P for Qarun and Wadi El-Rayan lakes, respectively.     

Development of zerovalent iron and titania (Fe0/TiO2) composite for oxidative degradation of dichlorophene in aqueous solution: synergistic role of peroxymonosulfate (HSO5−)

Environmental Science and Pollution Research - Binary composite of zerovalent iron and titanium dioxide (Fe0/TiO2) was synthesized for the catalytic removal of dichlorophene (DCP) in the presence...     

Infectious Pepper Mild Mottle Virus and Human Adenoviruses as Viral Indices in Sewage and Water Samples

Food and Environmental Virology - The objective of this study was to compare human adenoviruses (HAdVs) genome and infectivity, polyomaviruses (JC and BK) genome (JCPyVs) and (BKPyVs), Pepper Mild...