Development of an analytical method for analysis of flubendiamide,des-iodo flubendiamide and study of their residue persistence in tomato and soil

Flubendiamide is a new insecticide that has been found to give excellent control of lepidopterous pests of tomato. This study has been undertaken to develop an improved method for analysis of flubendiamide and its metabolite des-iodo flubendiamide and determine residue retention in tomato and soil. The analytical method developed involved extraction of flubendiamide and its metabolite des-iodo flubendiamide with acetonitrile, liquid-liquid partitioning into hexane-ethyl acetate mixture (6:4, v v^?1) and cleanup with activated neutral alumina. Finally the residues were dissolved in gradient high pressure liquid chromatography (HPLC) grade acetonitrile for analysis by HPLC. The mobile phase, acetonitrile-water at 60:40 (v v^?1) proportion and the wavelength of 235 nm gave maximum peak resolution. Using the above method and HPLC parameters described, nearly 100 % recovery of both insecticides were obtained. There was no matrix interference and the limit of quantification (LOQ) of the method was 0.01 mg kg^?1. Initial residue deposits of flubendiamide on field-treated tomato from treatments @ 48 and 96 g active ingredient hectare^?1 were 0.83 and 1.68 mg kg^?1,respectively. The residues of flubendiamide dissipated at the half-life of 3.9 and 4.4 days from treatments @ 48 and 96 g a.i. ha^?1, respectively and persisted for 15 days from both the treatments. Des-iodo flubendiamide was not detected in tomato fruits at any time during the study period. Residues of flubendiamide and des-iodo flubendiamide in soil from treatment @ 48 and 96 g a.i. ha^?1 were below detectable level (BDL, < 0.01 mg kg^?1) after 20 days. Flubendiamide completely dissipated from tomato within 20 days when the 480 SC formulation was applied at doses recommended for protection against lepidopterous pests.     

Levels and risk assessment of chemical contaminants in byproducts for animal feed in Denmark

With aim to provide information on chemical contaminants in byproducts in animal feed, the data from an official control by the Danish Plant Directorate during 1998–2009, were reviewed and several samples of citrus pulp and dried distillers grains with solubles (DDGS) were additionally collected for analysis and risk assessment. The levels of contaminants in the samples from the official control were below maximum limits from EU regulations with only a few exceptions in the following groups; dioxins and dioxin-like polychlorobiphenyls (PCBs) in fish-containing byproducts and dioxins in vegetable and animal fat, hydrogen cyanide in linseed, and cadmium in sunflowers. The levels of pesticides and mycotoxins in the additionally collected samples were below maximum limits. Enniatin B (ENN B) was present in all DDGS samples. The hypothetical cases of carry-over of contamination from these byproducts were designed assuming total absorption and accumulation of the ingested contaminant in meat and milk and high exposure (a byproduct formed 15–20% of the feed ration depending on the species). The risk assessment was refined based on literature data on metabolism in relevant animal species. Risk assessment of contaminants in byproducts is generally based on a worst-case approach, as data on carry-over of a contaminant are sparse. This may lead to erroneous estimation of health hazards. The presence of ENN B in all samples of DDGS indicates that potential impact of this emerging mycotoxin on feed and food safety deserves attention. A challenge for the future is to fill up gaps in toxicological databases and improve models for carry-over of contaminants.     

Concentrations and distributions of 18 organochlorine pesticides listed in the Stockholm Convention in surface sediments from the Liaohe River basin,China

Organochlorine pesticides (OCPs) were analyzed in 26 surface sediment samples from the Liaohe River basin, and the distributions of and potential environmental risks posed by OCPs in the basin were evaluated. Eighteen OCPs listed in the Stockholm Convention were determined using isotope-dilution gas chromatography–high resolution mass spectrometry. This is the first study of hexachlorobenzene (HCB) in the Liaohe River basin sediments. The total OCP concentrations were 0.39–68.06 ng g^?1 dry weight. The total α-, β-, γ-, and δ-hexachlorocyclohexane (HCH), the total dichlorodiphenyltrichloroethane (DDT – p,p′-dichlorodiphenyldichloroethane (DDD), p,p′-dichlorodiphenyldichloroethylene (DDE), o,p^'-DDT, and p,p′-DDT), and the HCB concentrations in the sediment samples were 0.1–28.48 ng g^?1 (mean 4.01 ng g^?1), 0.08–6.52 ng g^?1 (mean 3.07 ng g^?1), and 0.18–24.8 ng g^?1 (mean 4.38 ng g^?1), respectively. The HCB concentrations were higher than the concentrations of the other OCPs, and the HCHs and HCB together were the dominant OCPs. β-HCH was the most abundant HCH isomer. The concentrations of DDTs and other OCPs were relatively low, and the (DDE+DDD)/DDT ratios (>0.5) and DDD/DDE ratios (<1) indicated that no recent DDT inputs had occurred in the Liaohe River system. The main sources of HCHs were probably the historical production and agricultural use of HCH in the study area. The DDT and HCH concentrations were generally below or similar to the concentrations that have been found in other parts of the world. An ecotoxicological evaluation indicated that HCHs in surface sediments pose slight risks to human and ecological health in the Liaohe River basin.     

Effects of pen bedding and feeding high crude protein diets on manure composition and greenhouse gas emissions from a feedlot pen surface

Greenhouse gas (GHG) emissions from concentrated animal feeding operations vary by stage of production and management practices. The objective of this research was to study the effect of two dietary crude protein levels (12 and 16%) fed to beef steers in pens with or without corn stover bedding. Manure characteristics and GHG emissions were measured from feedlot pen surfaces. Sixteen equal-sized feedlot pens (19?×?23 m) were used. Eight were bedded approximately twice a week with corn stover and the remaining eight feedlot pens were not bedded. Angus steers (n = 138) were blocked by live weights (lighter and heavier) with 7 to 10 animals per pen. The trial was a 2?×?2 factorial design with factors of two protein levels and two bedding types (bedding vs. non bedding), with four replicates. The study was conducted from June through September and consisted of four ?28-day periods. Manure from each pen was scrapped once every 28 days and composite manure samples from each pen were collected. Air samples from pen surfaces were sampled in Tedlar bags using a Vac-U-Chamber coupled with a portable wind tunnel and analyzed with a greenhouse gas gas chromatograph within 24 hr of sampling. The manure samples were analyzed for crude protein (CP), total nitrogen (TN), ammonia (NH₃), total volatile fatty acid (TVFA), total carbon (TC), total phosphorus (TP), and potassium (K). The air samples were analyzed for methane (CH₄), carbon dioxide (CO₂), and nitrous oxide (N₂O) concentrations. The concentration of TN was significantly higher (p < 0.05) in manure from pens with cattle fed the high protein diets. The volatile fatty acids (VFAs) such as acetic, propionic, isobutyric, butyric, isovaleric, and valeric acids concentrations were similar across both treatments. There were no significant differences in pen surface GHG emissions across manure management and dietary crude protein levels.

Implications: Livestock manure produces odor and emits GHGs (CO₂, CH₄, and N₂O) at different stages of production and management practices that have significant environmental concerns. Thus, it is important to measure GHG contributions from different sources and develop appropriate mitigation strategies for minimizing GHG contribution from livestock production facilities. Two dietary protein levels (12 and 16%) fed to beef steers in pens with or without corn stover bedding were studied. The results indicated that dietary protein levels and bedding vs. no bedding had very little effect on GHG emissions and manure composition under open feedlot conditions in North Dakota climatic conditions and management practices.     

Evaluation of C18 solid‐phase extraction cartridges for the isolation of select pesticides and metabolites

Abstract

Nine different C₁₈ solid‐phase extraction (SPE) cartridges were evaluated for their efficiency at extracting nine pesticides and two s‐triazine metabolites from spiked deionized water samples. The SPE cartridges were found to contain nitrogen (N) and/or phosphorus (P) contaminants and varied in their extraction efficiency for certain pesticides and metabolites. Four of the nine SPE cartridges gave acceptable (70 to 120%) pesticide and metabolite recovery percentages, while five cartridges had marginal (50 to 70%) to poor (< 50%) recoveries. Statistical analyses showed that the poor to marginal recoveries found for three compounds could not be explained by considering several indigenous chemical and physical traits of the cartridge. It is suggested that proper SPE cartridge selection for pesticide recovery should be evaluated using several different cartridges.     

A method for the determination of rhodamine b and brilliant sulfaflavine on cotton string collectors and in a spray tank solution mixture

Abstract

A fluorescent method for the determination of rhodamine B (RhB) and brilliant sulfaflavine (BSF) dual tracers on cotton string collectors and in spray tank solutions was developed for the evaluation of the effects of adjuvants on the atmospheric drift of agricultural sprays. Both tracers on collectors were extracted with deionized water simultaneously and measured directly with a Fluorescent Specrometer by switching the maximum excitation and emission wavelengths. The linear ranges of the RhB and BSF standard curves were 0–50 and 0–10 ppb respectively. Recoveries of tracers on cotton strings ranged from 92.9% ± 1.1% to 95.1% ± 1.0% for RhB and 91.9% ± 2.8% to 103% ± 0.6% for BSF when spiked levels ranged from 0.25 to 2.5 μg per collector. The detection limit of the instrument was approximately 0.1 ppb for both tracers. The detection limits of the analytical method were approximately 0.1 ppb for RhB and 0.3 ppb for BSF when the background levels of cotton strings were subtracted. The presence of one tracer in the solution did not significantly interfere with the detection of the other tracer in the same solution. The presence of adjuvants added to the spray tank solutions did not interfere with the detection of both tracers when the adjuvants were applied at the manufacturer's maximum recommendation rates.     

Eliminating Reheat from Existing FGD Systems

The Clean Air Act Amendments of the early 1970_s required coal burning utilities to reduce their emissions of sulfur dioxide. Lime or limestone based wet systems were employed for flue gas desulfurization (FGD). These systems reduced flue gas temperatures to below acid dew point conditions. Concerned about the prospect of ductwork exposed to a saturated, acid-rich environment, most utilities turned to stack gas reheat (SGR) to increase flue gas temperatures. By 1980, 82 percent of all FGD facilities employed SGR. Today there are about 130 FGD systems of which 101 employ some form of stack gas reheat.     

Formaldehyde Dose-Response in Healthy Nonsmokers

Industrial, commercial, and domestic levels of formaldehyde exposure range from <0.1 to >5.0 ppm. Irritation of the eyes and upper respiratory tract predominate, and bronchoconstriction is described in case reports. However, pulmonary function and irritant symptoms together have not been assessed over a range of HCHO concentrations in a controlled environment. We investigated dose response in both symptoms and pulmonary function associated with 3-h exposures to 0.0-3.0 ppm HCHO in a controlled environmental chamber. Ten subjects were randomly exposed to 0.0, 0.5, 1.0, and 2.0 ppm HCHO at rest plus 2.0 ppm HCHO with exercise and nine additional subjects were randomly exposed to 0.0,1.0,2.0, and 3.0 ppm HCHO at rest plus 2.0 ppm HCHO with exercise. Significant dose-response relationships in odor and eye irritation were observed (p < 0.05). Nasal flow resistance was increased at 3.0 ppm (p < 0.01), but not at 2.0 ppm HCHO. There were no significant decrements in pulmonary function (FVC, FEV₁, FEF_25-75%, SGaw) or increases in bronchial reactivity to methacholine (log PD_35SGaw) with exposure to 0.5-3.0 ppm HCHO at rest or to 2.0 ppm HCHO with exercise.     

Significance of Regional Source Contributions to Urban PM-10 Concentrations

Based on data collected in St. Louis, Philadelphia and other eastern U.S. cities, we conclude that a significant fraction of the PM-10 concentration is "background." In these urban areas the background fraction ranges from 35 to 80 percent of the daily, monthly or annual concentration. The bulk of the background appears to be of regional origin. The average chemical makeup of eastern U.S. PM-10 is sulfate as SO₄, 21-34 percent; crustal material, 14-39 percent; "unknown" (carbonaceous matter, ammonium, nitrate and water), 36-51 percent, all of which is difficult to apportion to specific sources. Dispersion modeling using a local source inventory can account only for a small portion of the total PM-10 mass. Emission roll-back of local sources may have a limited effect on reducing total concentrations of PM-10.