Combining sap flow and eddy covariance approaches to derive stomatal and non-stomatal O3 fluxes in a forest stand

Stomatal O₃ fluxes to a mixed beech/spruce stand (Fagus sylvatica/Picea abies) in Central Europe were determined using two different approaches. The sap flow technique yielded the tree-level transpiration, whereas the eddy covariance method provided the stand-level evapotranspiration. Both data were then converted into stomatal ozone fluxes, exemplifying this novel concept for July 2007. Sap flow-based stomatal O₃ flux was 33% of the total O₃ flux, whereas derivation from evapotranspiration rates in combination with the Penman-Monteith algorithm amounted to 47%. In addition to this proportional difference, the sap flow-based assessment yielded lower levels of stomatal O₃ flux and reflected stomatal regulation rather than O₃ exposure, paralleling the daily courses of canopy conductance for water vapor and eddy covariance-based total stand-level O₃ flux. The demonstrated combination of sap flow and eddy covariance approaches supports the development of O₃ risk assessment in forests from O₃ exposure towards flux-based concepts.     

Quantifying trace gas emissions from composite landscapes: A mass-budget approach with aircraft measurements

Quantifying trace gas emissions and the influence of surface exchange processes on the atmosphere is a necessary step towards the control of global greenhouse gas emissions and reliability of air quality models. This paper proposes a procedure based on the mass balance method and implemented on highly resolved aircraft data. It allows one to estimate surface exchanges on areas of several km² and heterogeneous features exploiting the characteristics of convective boundary layer during steady state conditions that permit the estimation of emission/absorption terms as functions of advective fluxes only. A nonparametric approach is adopted and the fluxes on the surface of a virtual box surrounding the area of interest are reconstructed on the basis of scalar densities and wind vectors using Shepard functions. Two different techniques are also proposed to face lack of data on the top surface of the box. The method has been applied to experimental data coming from measurement campaigns on two different sites. It provides realistic estimates of the CO₂ emission/absorption in the considered areas that are in good agreement with CO₂ fluxes evaluated by Airborne Eddy Covariance and confirm the suitability of the proposed approach for the assessment of turbulent exchange of trace gases by composite landscapes. Uncertainties on the estimated emissions due to both propagation of the experimental error and interpolation have been quantified by bootstrap analysis as 6%.     

Economic Impact of Mass Production of Alternative Low Emission Automotive Power Systems

The study considers a range of possible effects on the transportation industry, satellite industries, the labor market, and the economy which may be anticipated in the event mass production of unconventional low emission automotive propulsion systems should occur, whether as a consequence of federal intervention, or not. A postulated 1 976 Otto Cycle Internal Combustion Engine equipped with a dual catalyst manifold reactor and other “conventional” emission control devices was compared in detail with a Regenerative Free Turbine Engine and a Rankine Cycle Engine, as specified by the contracting agency. Manufacturing costs, operating and ownership costs, consumer demand, inter-industry effects, employment, resource requirements, and international trade implications were analyzed in depth under a number of plausible sets of policy constraints and parametric variations. Principal conclusions are that conversion over a 10 year period is feasible, that manufacturing cost differentials are less critical than fuel consumption and cost differentials, that industry/employment impacts are minor, and that resource/trade effects are dominated by petroleum imports. Implications for federal policy are discussed.     

Arsenic strongly associates with ferrihydrite colloids formed in a soil effluent

Arsenic mobility may increase in liquid phase due to association with colloidal Fe oxides. We studied the association of As with Fe oxide colloids in the effluent from water-saturated soil columns run under anoxic conditions. Upon exfiltration, the solutions, which contained Fe²⁺, were re-aerated and ferrihydrite colloids precipitated. The entire amount of effluent As was associated with the ferrihydrite colloids, although PO₄³⁻, SiO₄⁴⁻, CO₃²⁻ and dissolved organic matter were present in the effluent during ferrihydrite colloid formation. Furthermore, no subsequent release of As from the ferrihydrite colloids was observed despite the presence of these (in)organic species known to compete with As for adsorption on Fe oxides. Arsenic was bound via inner-sphere complexation on the ferrihydrite surface. FTIR spectroscopy also revealed adsorption of PO₄³⁻ and polymerized silica. However, these species could not impede the quantitative association of As with colloidal ferrihydrite in the soil effluents.     

A techno-economic comparison of fluidized bed gasification of two mixed plastic wastes

A comparison between the most promising design configurations for the industrial application of gasification based, plastics-to-energy cogenerators in the 2-6 MWe range is presented. A pilot scale bubbling fluidized bed air gasifier, having a feeding capacity of 100 kg/h, provided experimental data: the syngas complete composition, the characterization of the bed material, the entrained fines collected at the cyclone and the purge material from the scrubber. Mass and energy balances and material and substance flow analyses have been therefore drawn to assess and compare design solutions utilizing two mixed plastic wastes (MPW) obtained from separate collection of plastic packaging, after different levels of pre-treatments. The related techno-economic performances have been finally estimated on the basis of the manufacturer’s specifications. The study concludes that the MPW obtained after a very simple pre-treatment and fed to a gasifier coupled with a steam turbine is the solution that currently offers the higher reliability and provides the higher internal rate of return for the investigated range of electrical energy production.     

Ecological impacts of the N-viro biosolids land-application for wild blueberry (Vaccinium angustifolium. Ait) production in Nova Scotia

Land application of biosolids from processed sewage sludge may deteriorate soil, water, and plants. We investigated the impact of the N-Viro biosolids land-application on the quality of the soil water that moved through Orthic Humo-Ferric Podzols soil of Nova Scotia (NS) at the Wild Blueberry Research Institute, Debert, NS Canada. In addition, the response of major soilproperties and crop yield was also studied. Wild blueberry (Vaccinium angustifolium. Ait) was grown under irrigated and rainfed conditions in 2008 and 2009. Four experimental treatments including (i) NI: N-Viro irrigated, (ii) NR: N-Viro rainfed, (iii) FI: inorganic fertilizer irrigated, and (iv) FR: inorganic fertilizer rainfed (control) were replicated 4 times under randomized complete block design. Soil samples were collected at the end of each year and analyzed for changes in cation exchange capacity (CEC), soil organic matter (SOM), and pH.Soil water samples were collected four times during the study period from the suction cup lysimeters installed within and below crop root zone at 20 and 40 cm depths, respectively. The samples were analyzed for a range of water quality parameters including conductance, hardness, pH, macro- and micronutrients, and the infectious pathogens Escherichia coli (E. coli) and salmonella. Berries were harvested for fruit yield estimates. Irrigation significantly increased CEC during 2008 and the soil pH decreased from 4.93 (2008) to 4.79 (2009). There were significant influences of irrigation, fertilizer, and their interaction, in some cases, on most of the soil water quality parameters except on the infectious bacteria. No presence of E. coli or salmonella were observed in soil and water samples, reflecting the absence of these bacteria in biosolids used in this experiment. Nutrient concentration in the soil water samples collected from the four treatments were higher in the sequence NI > NR > FI > FR. The irrigation treatment had significant effect on the unripe fruit yield. We conclude that the comparable performance of N-Viro biosolids and the increasing prices of inorganic fertilizers would compel farmers to use economically available N-Viro biosolids that, coupled with the supplemental irrigation, did not deteriorate the studied soil properties, soil water quality, and the wild blueberry yield during this experiment.     

Inhalation dose assessment of indoor radon progeny using biokinetic and dosimetric modeling and its application to Jordanian population

High indoor radon concentrations in Jordan result in internal exposures of the residents due to the inhalation of radon and its short-lived progeny. It is therefore important to quantify the annual effective dose and further the radiation risk to the radon exposure. This study describes the methodology and the biokinetic and dosimetric models used for calculation of the inhalation doses exposed to radon progeny. The regional depositions of aerosol particles in the human respiratory tract were firstly calculated. For the attached progeny, the activity median aerodynamic diameters of 50 nm, 230 nm and 2500 nm were chosen to represent the nucleation, accumulation and coarse modes of the aerosol particles, respectively. For the unattached progeny, the activity median thermodynamic diameter of 1 nm was chosen to represent the free progeny nuclide in the room air. The biokinetic models developed by the International Commission on Radiological Protection (ICRP) were used to calculate the nuclear transformations of radon progeny in the human body, and then the dosimetric model was applied to estimate the organ equivalent doses and the effective doses with the specific effective energies derived from the mathematical anthropomorphic phantoms. The dose conversion coefficient estimated in this study was 15 mSv WLM⁻¹ which was in the range of the values of 6-20 mSv WLM⁻¹ reported by other investigators. Implementing the average indoor radon concentration in Jordan, the annual effective doses were calculated to be 4.1 mSv y⁻¹ and 0.08 mSv y⁻¹ due to the inhalation of radon progeny and radon gas, respectively. The total annual effective dose estimated for Jordanian population was 4.2 mSv y⁻¹. This high annual effective dose calculated by the dosimetric approach using ICRP biokinetic and dosimetric models resulted in an increase of a factor of two in comparison to the value by epidemiological study. This phenomenon was presented by the ICRP in its new published statement on radon.     

Radiological maps for Trabzon, Turkey

The activity concentrations and absorbed gamma dose rates due to primordial radionuclides and ¹³⁷Cs have been ascertained in 222 soil samples in 18 counties of the Trabzon province of Turkey using a HPGe detector. The mean activity concentrations of ²³⁸U, ²³²Th, ⁴⁰K and ¹³⁷Cs in soil samples were 41, 35, 437 and 21 Bq kg⁻¹, respectively. Based on the measured concentrations of these radionuclides, the mean absorbed gamma dose in air was calculated as 59 nGy h⁻¹ and hence, the mean annual effective dose due to terrestrial gamma radiation was calculated as 72 μSv y⁻¹. In addition, outdoor in situ gamma dose rate (D) measurements were performed in the same 222 locations using a portable NaI detector and the annual effective dose was calculated to be 66 μSv y⁻¹ from these results. The results presented in this study are compared with other parts of Turkey. Radiological maps of the Trabzon province were composed using the results obtained from the study.     

Aeromonas and Pseudomonas: antibiotic and heavy metal resistance species from Iskenderun Bay, Turkey (northeast Mediterranean Sea)

We studied the susceptibility patterns to 15 different antibiotics and six heavy metals in Aeromonas spp. and Pseudomonas spp. isolated from Iskenderun Bay, Turkey (northeast Mediterranean Sea). A high percentage of Aeromonas isolates showed resistance to cefazolin (66.6%) and trimethoprim–sulphamethoxazole (66.6%). Amongst the Pseudomonas isolates, there was a high incidence of resistance to nitrofurantoin (86.2%), cefazolin (84.8%) and cefuroxime (71.7%). Most isolates showed tolerance to different concentrations of heavy metals, and minimal inhibition concentrations ranged from 25 to >3,200 μg/ml. The Aeromonas spp. and Pseudomonas spp. showed high resistance to copper of 98.3% and 75.4%, respectively, and low resistance to lead of 1.7% and 7.2%, respectively. Our results show that antibiotic and heavy metal resistant Aeromonas spp. and Pseudomonas spp. were widespread in Iskenderun Bay in 2007 and 2008. The increasing presence of antibiotic and heavy metal resistant Aeromonas spp. and Pseudomonas spp. may become a potential human health hazard.