To cope or to sustain? Eroding long-term sustainability in an Indonesian coral reef fishery

Small-scale fisheries in coral reef areas support the livelihoods of millions of people worldwide. Anthropogenic impacts such as overfishing and climate change increasingly threaten both the reef ecosystem and the livelihood security of the people that depend on the reefs. Adaptive management strategies are needed to adequately deal with these threats, but they require an understanding of the underlying drivers, which often originate and act on multiple levels. Using a social-ecological system approach, the coral reef fishery of the Spermonde Archipelago in South Sulawesi/Indonesia is assessed to identify key drivers and strategic leverage points for management. Under the influence of international markets and technological changes, several export-oriented fisheries have developed in the area that led to distinct subsequent peaks in fishing activity in a pattern of sequential marine resource exploitation. In response to stressors such as seasonality and overfishing of individual locations or species, a number of coping strategies have developed locally. These include extensive borrowing from fishing patrons, diversification of fishing methods, fishing migrations, and the crafting of local institutions to regulate fishing activity. However, the coping strategies hinder, and even decrease, the capacity of the system to adapt to future stressors and undermine the sustainability of the fishery. Potential strategies that target different levels of the fishery system in order to strengthen adaptive management are identified.     

Evaluation of sorption-desorption processes for metalaxyl in natural and artificial soils

The main process controlling soil-pesticide interaction is the sorption-desorption as influenced by active soil surfaces. The sorption phenomena can influence translocation, volatility, persistence and bioactivity of a pesticide in soil. The present investigation was conducted on natural and artificial soils in order to enumerate the effect of soil components such as montmorillonite and ferrihydrite on the sorption behaviour of the fungicide metalaxyl and if sorption-desorption of the chiral pesticide affects the enantiomeric ratio. The sorption-desorption characteristics of metalaxyl were investigated by batch equilibration technique in a natural soil, two artificial soils, and in pure montmorillonite and ferrihydrite. After extraction, pesticide residues were analyzed by conventional and chiral chromatography using tandem mass spectrometry. A K_dSorp (2.3–6.5) suggests low level sorption of metalaxyl with an appreciable risk of run-off and leaching. Thus, metalaxyl poses a threat to surface and ground water contamination. Furthermore, desorption tests revealed a hysteretic effect (H ≤ 0.8) in natural and artificial soils. Significant amount of metalaxyl was found tightly bound to the adsorbents without desorbing readily after desorption cycle. Desorption of 22–56% of the total amount of the retained metalaxyl was determined. This study reveals that an artificial soil derived from different soil constituents can be used to assess their influence on sorption/desorption processes. The present investigation showed that both montmorillonite and ferrihydrite play a significant role in the sorption of metalaxyl. The sorption doesn't influence the enantiomeric ratio of racemic metalaxyl.     

Sorption, desorption and mineralisation of the herbicides glyphosate and MCPA in samples from two Danish soil and subsurface profiles

The vertical distribution of the sorption, desorption and mineralisation of glyphosate and MCPA was examined in samples from two contrasting soil and subsurface profiles, obtained from a sandy agricultural site and a non-agricultural clay rich site. The highest mineralisation of [14C-methylen]glyphosate, with 9.3-14.7% degraded to 14CO2 within 3 months was found in the deepest sample from the clay site. In the deeper parts of the sandy profile high sorption and low desorption of glyphosate coincided with no or minor mineralisation indicating a limited glyphosate bioavailability. MCPA was readily mineralised except in the deepest samples from both sites. The highest MCPA mineralisation was detected just below the surface layers with 72% or 44% degraded to 14CO2 at the sandy or the clay sites, respectively. MCPA sorped to a minor extent in all samples and no indications of sorption-controlled mineralisation was revealed. None of the herbicides were mineralised under anoxic conditions.     

建筑环境的生命周期分析

生命周期思想是解决环境与社会问题的一种整体性方法.这种方法是可持续建筑概念的关键.LCA(生命周期分析,或者生命周期评价)是将生命周期思想应用于建筑和建造业的一种重要工具.LCA可以提供有关物质和能源流动的重要信息.由于它很难应用于建筑物本身,所以关注的焦点越业越集中在对建筑环境实施更全面的分析上.通过LCA获得的知识最好是作为综合设计方法的一部分进行应用.在大多数项目中,如果不把LCA与数量调查或者能源模拟等其他手段结合起来就无法获得完整的LCA.将LCA应用于政策制定和需要优先考虑的问题依地区和经济条件而有所不同.     

Effects of initial seated position in low speed rear-end impacts: a comparison with the TNO rear impact dummy (TRID) model

Injury-producing mechanisms associated with rear-end impact collision has remained a mystery not withstanding numerous investigations devoted to its scrutiny. Several criteria have been proposed to predict the injury-causing mechanism, but none have been universally accepted. The challenge lies in determining a set of testing procedures representative of real-world collisions, wherein the results obtained are not only the same as human testing, but remain consistent with various subjects and impact conditions. It is hypothesized that one of the most important considerations in the testing methodology is the effect of initial seated position (ISP) on occupant kinematics during a rear impact collision. This study involves two parts that evaluates the effects of ISP during rear-end impact. In the first part, head acceleration results of computer simulation using Hybrid III TNO rear impact dummy (TRID) are compared to physical impact testing (PIT) of humans. The second part focuses on the computer simulation using TRID to obtain different neck parameters such as NIC (Neck Injury Criterion), NIJ (Neck Injury Predictor), neck forces and moments to predict the level of neck injury such as whiplash associated disorder (WAD) during low speed rear-end impact. In PIT, a total of 17 rear-impact tests were conducted with a nominal 8-km/hour change in velocity to 5 subjects in four different seated positions comprising of a normal position (NP) and three out of positions (OOP). The first position was a NP, defined as torso against the seat back, looking straight ahead, hands on the steering wheel, and feet on the floor. The second position was a head flex position (HFP), defined as the normal position with head flexed forward approximately 20 degrees. The third position was a torso lean position (TLP), defined as the normal position with torso leaned forward approximately 10 degrees away from the seat back. Lastly, a torso lean head flex position (TLHFP), defined as the normal position with the head flexed forward approximately 20 degrees and torso leaned forward approximately 10 degrees. The head acceleration plots from PIT reveal that for the third and fourth positions (TLP and TLHFP) when the subject torso leaned forward, the peak head acceleration for the subject decreased and there was also a delay in reaching the peak. The Hybrid III-TRID anthropomorphic test dummy (ATD) was used in the same four different seated positions using computer simulation software MAthematical DYnamic MOdel (MADYMO 6.0) and the head acceleration results were compared to PIT. The comparison demonstrates that the Hybrid III-TRID ATD with MADYMO can be a reliable testing procedure during low-speed, rear-end impact for the four ISPs considered since the head acceleration plots deviated within the range of PIT head acceleration plots for different human subjects. This ensures that the second part of the study with neck injury using computer simulation results is a reliable testing procedure. It can be observed that MADYMO results have a greater error when compared to PIT when more than one OOP condition is employed as in TLHFP. All these observations would help in providing a tool to better understand the injury mechanisms and provide an accurate testing procedure for rear-end impact.     

Increased levels of bacterial markers and CO2 in occupied school rooms

Our group previously demonstrated that carbon dioxide (CO2) levels in heavily occupied schools correlate with the levels of airborne bacterial markers. Since CO2 is derived from the room occupants, it was hypothesized that in schools, bacterial markers may be primarily increased in indoor air because of the presence of children; directly from skin microflora or indirectly, by stirring up dust from carpets and other sources. The purpose of this project was to test the hypothesis. Muramic acid (Mur) is found in almost all bacteria whereas 3-hydroxy fatty acids (3-OH FAs) are found only in Gram-negative bacteria. Thus Mur and 3-OH FA serve as markers to assess bacterial levels in indoor air (pmol m(-3)). In our previous school studies, airborne dust was collected only from occupied rooms. However, in the present study, additional dust samples were collected from the same rooms each weekend when unoccupied. Samples were also collected from outside air. The levels of dust, Mur and C10:0, C12:0, C14:0, and C16:0 3-OH FAs were each much higher (range 5-50 fold) in occupied rooms than in unoccupied school rooms. Levels in outdoor air were much lower than that of indoor air from occupied classrooms and higher than the levels in the same rooms when unoccupied. The mean CO2 concentrations were around 420 parts per million (ppm) in unoccupied rooms and outside air; and they ranged from 1017 to 1736 ppm in occupied rooms, regularly exceeding 800-1000 ppm, which are the maximum levels indicative of adequate indoor ventilation. This indicates that the children were responsible for the increased levels of bacterial markers. However, the concentration of Mur in dust was also 6 fold higher in occupied rooms (115.5 versus 18.2 pmole mg(-1)). This further suggests that airborne dust present in occupied and unoccupied rooms is quite distinct. In conclusion in unoccupied rooms, the dust was of environmental origin but the children were the primary source in occupied rooms.     

Analyzing the efficacy of subtropical urban forests in offsetting carbon emissions from cities

Urban forest management and policies have been promoted as a tool to mitigate carbon dioxide (CO₂) emissions. This study used existing CO₂ reduction measures from subtropical Miami-Dade and Gainesville, USA and modeled carbon storage and sequestration by trees to analyze policies that use urban forests to offset carbon emissions. Field data were analyzed, modeled, and spatially analyzed to compare CO₂ sequestered by managing urban forests to equivalent amounts of CO₂ emitted in both urban areas. Urban forests in Gainesville have greater tree density, store more carbon and present lower per-tree sequestration rates than Miami-Dade as a result of environmental conditions and urbanization patterns. Areas characterized by natural pine-oak forests, mangroves, and stands of highly invasive trees were most apt at sequestering CO₂. Results indicate that urban tree sequestration offsets CO₂ emissions and, relative to total city-wide emissions, is moderately effective at 3.4 percent and 1.8 percent in Gainesville and Miami-Dade, respectively. Moreover, converting available non-treed areas into urban forests would not increase overall CO₂ emission reductions substantially. Current CO₂ sequestration by trees was comparable to implemented CO₂ reduction policies. However, long-term objectives, multiple ecosystem services, costs, community needs, and preservation of existing forests should be considered when managing trees for climate change mitigation and other ecosystem services.     

Effects of water temperature and mixed layer depth on zooplankton body size

Ecological consequences of global warming include shifts of species ranges toward higher altitudes and latitudes as well as temporal shifts in phenology and life-cycle events. Evidence is accumulating that increasing temperature is also linked to reduced body size of ectotherms. While temperature can act directly on body size, it may also act indirectly by affecting the timing of life-cycle events and the resulting population age and size structure, especially in seasonal environments. Population structure may, in turn, be influenced by temperature-driven changes in resource availability. In a field mesocosm experiment, we investigated how water temperature and mixed surface layer depth (a temperature-dependent determinant of light availability to phytoplankton) affected population dynamics, population age and size structure, and individual size at stage (size at first reproduction) of Daphnia hyalina during and after a phytoplankton spring bloom. Mixed layer depth was inversely related to the magnitudes of the phytoplankton spring bloom and the subsequent Daphnia peak, but had no effect on the body size of Daphnia. Conversely, temperature had no effects on abundance peaks but strongly affected the timing of these events. This resulted in at times positive, at other times negative, transient effects of temperature on mean body size, caused by asynchronous changes in population size structure in cold versus warm treatments. In contrast to mean body size, individual size at stage consistently decreased with increasing temperature. We suggest that size at stage could be used as an unbiased response parameter to temperature that is unaffected by transient, demographically driven changes in population size structure.     

Ozongehalt und Fahrverbot

Ohne Zusammenfassung