The combined use of chemical and biochemical markers to assess water quality along the Ebro River

Carp (Cyprinus carpio) and barbel (Barbus graellsii) were collected from five sites along the Ebro River. The study was designed to assess levels of persistent organic pollutants and metals bioaccumulated by fish, and some biochemical responses (cytochrome P450 system, phase II activities, and metallothioneins) against those pollutants. The highest levels of PCBs and DDTs were detected in carp from industrialised areas, which also showed high levels of mercury and cadmium in the liver, and high levels of nonylphenol in bile. Significant alterations in some biochemical markers were observed and associated to combined exposure to pollutants. The activity 7-ethoxyresorufin O-deethylase ranged from 69 pmol/min/mg protein in carp from the reference site to 415 pmol/min/mg protein in those from polluted sites. Carp from the Ebro Delta, an agricultural area, had depressed acetylcholinesterase in muscle tissue. Metallothionein concentrations were positively correlated with copper residues, but no significant differences among sampling points were observed.     

Decolourization of synthetic dyes by Trametes hirsuta in expanded-bed reactors

The present paper studies the decolourization of different synthetic dyes (Indigo Carmine, Bromophenol Blue, Methyl Orange and Poly R-478) by the white-rot fungus Trametes hirsuta at bioreactor scale under solid-state conditions, operating with ground orange peelings as a support-substrate. Dye decolourization was performed in both batch and continuous mode. Batch cultivation led to high decolourization percentages in a short time (100% for Indigo Carmine in 3h and 85% for Bromophenol Blue in 7 h). As for continuous cultivation, different hydraulic retention times (HRT) were studied (0.8, 1, 1.5 and 3d). The highest decolourization percentages were obtained operating at a HRT of 3d, especially for the dyes Methyl Orange and Poly R-478 (81.4% and 46.9%, respectively). This is a very interesting result, since there are few studies dealing with the continuous decolourization of dyes at bioreactor scale by fungal laccases.     

Effect of chromium on the fatty acid composition of two strains of Euglena gracilis

The effect of hexavalent chromium on fatty acid composition was studied in two strains of Euglena gracilis; UTEX 753 (from the Culture Collection of Algae of Texas University, USA) and MAT (isolated from a highly polluted River). Both were grown in photoauxotrophic and photoheterotrophic conditions and exposed to two metal concentrations, one below and one above IC50. The high malondialdehyde (MDA) levels (3 to 7-fold) obtained with chromium concentration above IC50, suggested the existence of metal-induced lipid peroxidation. Total lipid content increased only with concentration below IC50, whereas it was inhibited by higher metal concentration. Photoheterotrophic control strains exhibited a significantly higher proportion of saturated and polyunsaturated fatty acids. Polyunsaturated acids were most affected by chromium, especially those related to chloroplast structures. Ultra-structure studies showed clear thylakoid disorganization in all treated cells. The results indicate that hexavalent chromium affects levels of fatty acids, especially those related to photosynthetic activity.     

Dip-angle influence on areal DNAPL recovery by co-solvent flooding with and without pre-flooding

A two-dimensional (2D) laboratory model was used to study effects of gravity on areal recovery of a representative dense non-aqueous phase liquid (DNAPL) contaminant by an alcohol pre-flood and co-solvent flood in dipping aquifers. Recent studies have demonstrated that injection of alcohol and co-solvent solutions can be used to reduce in-situ the density of DNAPL globules and displace the contaminant from the source zone. However, contact with aqueous alcohol reduces interfacial tension and causes DNAPL swelling, thus facilitating risk of uncontrolled downward DNAPL migration. The 2D laboratory model was operated with constant background gradient flow and a DNAPL spill was simulated using tetrachloroethene (PCE). The spill was dispersed to a trapped, immobile PCE saturation by a water flood. Areal PCE recovery was studied using a double-triangle well pattern to simulate a remediation scheme consisting of an alcohol pre-flood using aqueous isobutanol ( approximately 10% vol.) followed by a co-solvent flood using a solution of ethylene glycol (65%) and 1-propanol (35%). Experiments were conducted with the 2D model oriented in the horizontal plane and compared to experiments at the 15 degrees and 30 degrees dip-angle orientations. Injection was applied either in the downward or upward direction of flow. Experimental results were compared to theoretical predictions for flood front stability and used to evaluate effects of gravity on areal PCE recovery. Sensitivity experiments were performed to evaluate effects of the alcohol pre-flood on PCE areal recovery. For experiments conducted with the alcohol pre-flood and the 2D model oriented in the horizontal plane, results indicate that 89-93% of source zone PCE was recovered. With injection oriented downward, results indicate that areal PCE recovery was 70-77% for a 15 degrees dip angle and 57-59% for a 30 degrees dip angle. With injection oriented upward, results indicate that areal PCE recovery was 57-60% at the 30 degrees dip angle, which was similar to PCE recovery for injection in the downward flow direction. Lower areal PCE recovery at greater dip angles in either direction of flow was attributed to DNAPL swelling and migration, flood front instabilities and bypassing of the displaced fluid past the extraction wells during the alcohol pre-flood. Additional results demonstrate that the use of an alcohol pre-flood can be beneficial in improving DNAPL recovery in the horizontal orientation, but pre-flooding may reduce areal recovery efficiency in dip-angle orientations. This study also demonstrates the use of theoretical perturbation (fingering) analysis in predicting NAPL recovery efficiency for flooding processes in remediating aquifers with dip angles.     

Twentieth century overview of heavy metals in the Galician Rias (NW Iberian Peninsula)

The 18 Galician Rias, comprising 25% of the Iberian Peninsula coastline, form a unique system within the European continental Atlantic coast and provide a useful reference area for studies of metals. These rias are sensitive to anthropogenic influence due to the socioeconomic importance generated in these areas by industry, aquaculture, port activities, fishing, tourism and, accordingly, several islands lying within close proximity to the rias have recently been declared natural parks. Aquaculture in the Galician Rias is a growth industry and in 2000 the rias supported 3386 mussel rafts producing 2.5 x 10(8) kg year(-1), i.e. 40% of European Union total seafood production. The Galician Rias are partially stratified estuaries with positive residual circulation with fresh (runoff lower than 100 m3 s(-1) and salt water mixing inside the basins. This behaviour has direct consequences on metal fluxes whereby the rias behave as a barrier and accumulate metals in the sediments. Metals tend to deposit close to point sources and remobilization occurs inside the ria, leading to a seaward decrease in metal concentration. With the exception of the Ulla (Arosa Ria) and Eume (Ares-Betanzos Ria) head rivers and the Lagares river (Vigo Ria) the available data suggest that riverine freshwater inputs are not the main source of contamination. Metal studies reported in the literature mainly relate to Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn, and to a lesser extent Hg and Sn. Studies of other harmful metals such as Ag, Se and As are notably lacking. In addition, the studies have been localized and mainly restricted to the surface sediment. Data of heavy metals in the dissolved phase, suspended particulate matter and biota is scarce in the mainstream literature and should be considered in the future research. From the entire Galician coast, data from seven rias of socio-economic importance form the bulk of the published work. There is an urgent need to standardize procedures, employ 'clean' procedures to avoid contamination of samples and regular assessment of analytical accuracy with CRMs in order that results can be compared among the scientific community and produce reliable results. The continuation of coastal environmental studies requires an enlargement of the sampling locations as well as systematic and periodic analysis of known pollution sources in order to decide whether coastal regeneration action is needed. Studies dedicated to metals in the water column are lacking and need more attention in future research. The majority of the available data correspond to the fluvial front (30%) at ria head and, to a lesser extent, to the oceanic front (3%), under summer upwelling events. Current awareness of the rias suggests that they are not contaminated although there is some evidence of important localized anthropogenically induced enrichments at the outflow of the Lagares River (Pb, Zn), the San Simón inlet (Pb) and near to the harbor (Pb, Zn, Cu) in the Vigo Ria, the inner part (Cu, Zn, Hg, Pb) of the Pontevedra Ria, the Ulla River estuary (Cu, Cr, Mn, Ni; Zn) in the Arosa Ria, the inner zone (Cu, Pb, Zn) of the Coru?a Ria, the Ferrol Ria (Zn) and the Eume Estuary (Zn, Mn, Ni, Co) in the Ares-Betanzos Ria. In addition, TBT enrichment has been found along the Galician coast, being highest in the industrial bays (Vigo, Coru?a and Ferrol). Nevertheless, it is important to point out the lack of information concerning the relationship between metal concentrations in different fractions of sediments and/or water and their bioavailability and toxicity on biota in order to confirm metal contamination dangers. The present paper reviews all the information published on metals in the rias up to the year 2000 and takes a biogeochemical standpoint, i.e. metal presence in the ria reservoirs: water column, suspended particulate matter, sediments and biota, as well as the fluvial and oceanic frontiers.     

Anthropogenic and natural influence on the PM(10) and PM(2.5) aerosol in Madrid (Spain). Analysis of high concentration episodes

Non-mineral carbon is the main component of PM10 and PM2.5 at an urban roadside site in Madrid accounting for more than 50% of the total bulk mass in winter pollution episodes. In these cases a 70-80% of the particle mass is anthropogenic. Particles of crustal/mineral origin contribute significantly to the observed PM10 concentrations, especially in spring and summer. They have also been found in the PM2.5 fraction although secondary particles are the next most important contributor in this size. Long-range transport particle episodes of Saharan dust significantly contribute to exceedence of the new daily limiting PM10 value in the urban network and at nearby rural background stations. This type of long-range transport event also influences PM2.5 concentrations. The crustal contribution can account for up to 67 and 53% of the PM10 and PM2.5 bulk mass in such cases.     

PM2.5 assessment in 21 European study centers of ECRHS II: Method and first winter results

The follow-up of a cohort of adults from 29 European centers of the former European Community Respiratory Health Survey (ECRHS) I (1989-1992) will examine the long-term effects of exposure to ambient air pollution on the incidence, course, and prognosis of respiratory diseases, in particular asthma and decline in lung function. The purpose of this article is to describe the methodology and the European-wide quality control program for the collection of particles with 50% cut-off size of 2.5 microm aerodynamic diameter (PM2.5) in the ECRHS II and to present the PM2.5 results from the winter period 2000-2001. Because PM2.5 is not routinely monitored in Europe, we measured PM2.5 mass concentrations in 21 participating centers to estimate background exposure in these cities. A standardized protocol was developed using identical equipment in each center (U.S. Environmental Protection Agency Well Impactor Ninety-Six [WINS] and PQ167 from BGI, Inc.). Filters were weighed in a single central laboratory. Sampling was conducted for 7 days per month for a year. Winter mean PM2.5 mass concentrations (November 2000-February 2001) varied substantially, with Iceland reporting the lowest value (5 microg/m3) and northern Italy the highest (69 microg/m3). A standardized procedure appropriate for PM2.5 exposure assessment in a multicenter study was developed. We expect ECRHS II to have sufficient variation in exposure to assess long-term effects of air pollution in this cohort. Any bias caused by variation in the characteristics of the chosen monitoring location (e.g., proximity to traffic sources) will be addressed in later analyses. Given the homogenous spatial distribution of PM2.5, however, concentrations measured near traffic are not expected to differ substantially from those measured at urban background sites.     

Biochar as low-cost sorbent of volatile fuel organic compounds: potential application to water remediation

Pyrolysis of waste materials to produce biochar is an excellent and suitable alternative supporting a circular bio-based economy. One of the properties attributed to biochar is the capacity for sorbing organic contaminants, which is determined by its composition and physicochemical characteristics. In this study, the capacity of waste-derived biochar to retain volatile fuel organic compounds (benzene, toluene, ethylbenzene and xylene (BTEX) and fuel oxygenates (FO)) from artificially contaminated water was assessed using batch-based sorption experiments. Additionally, the sorption isotherms were established. The results showed significant differences between BTEX and FO sorption on biochar, being the most hydrophobic and non-polar contaminants those showing the highest retention. Furthermore, the sorption process reflected a multilayer behaviour and a relatively high sorption capacity of the biochar materials. Langmuir and Freundlich models were adequate to describe the experimental results and to detect general differences in the sorption behaviour of volatile fuel organic compounds. It was also observed that the feedstock material and biochar pyrolysis conditions had a significant influence in the sorption process. The highest sorption capacity was found in biochars produced at high temperature (>?400 °C) and thus rich in aromatic C, such as eucalyptus and corn cob biochars. Overall, waste-derived biochar offers a viable alternative to be used in the remediation of volatile fuel organic compounds from water due to its high sorption capacity.

     

Microplastic distribution in surface sediments along the Spanish Mediterranean continental shelf

Environmental Science and Pollution Research - Microplastics (MPs) are widely recognised as a contaminant of emerging concern in the marine environment. This work provides original data of the...     

Ovariectomy predisposes female rats to fine particulate matter exposure’s effects by altering metabolic,oxidative, pro-inflammatory,and heat-shock protein levels

Environmental Science and Pollution Research - The reduction of estrogen levels, as a result of menopause, is associated with the development of metabolic diseases caused by alterations in...