Direct electrochemistry of glucose oxidase and biosensing for glucose based on DNA/chitosan film

Glucose oxidase (GOD) is widely used in the glucose biosensor industry. The amperometric biosensors based on directly electron transfer (DET) between an electrode and immobilized GOD are especially promising. In this article, GOD was immobilized with a DNA/chitosan bio-material film on GC electrode, and the DET of GOD on DNA/chitosan was studied. The cyclic voltammetric results indicated that the GOD immobilized in the DNA/chitosan film underwent DET reaction, and the cyclic voltammogram displayed a pair of well-defined redox peaks with a formal potential of ?0.45 V (vs. Ag/AgCl) at pH 5.5. The response showed a surface-controlled electrode process with an electron transfer rate constant of 0.91 sec^?1 determined in the scan rate range from 10 to 100 mV/sec. The GOD immobilized in DNA/chitosan membrane retained its biocatalytic activity and stability. The immobilized GOD could electrocatalyze the reduction of dissolved oxygen and resulted in a great increase of the reduction peak current. Upon the addition of glucose, the reduction peak current decreased, which could be used for glucose detection with a sensitivity of 0.48 μA/(mmol/L), a linear range from 0.04 to 2.28 mmol/L and a detection limit of 0.04 mmol/L at a signal-to-noise ratio of 3. The sensor could exclude the interference of commonly coexisted uricacid and ascorbic acid.     

Dioxin- and POP-contaminated sites—contemporary and future relevance and challenges

BACKGROUND, AIM AND SCOPE: Once they have been generated, polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other persistent organic pollutants (POPs) can persist in soils and sediments and in waste repositories for periods extending from decades to centuries. In 1994, the US EPA concluded that contaminated sites and other reservoirs are likely to become the major source of contemporary pollution problems with these substances. With this in mind, this article is the first in a new series in ESPR under the title 'Case Studies on Dioxin and POP Contaminated Sites--Contemporary and Future Relevance and Challenges', which will address this important issue. The series will document various experiences from sites contaminated with PCDD/F and other POPs. This article provides an overview of the content of the articles comprising the series. In addition, it provides a review of the subject in its own right and identifies the key issues arising from dioxin/POP-contaminated sites. Additionally, it highlights the important conclusions that can be drawn from these examples. The key aim of this article and of the series as a whole is to provide a comprehensive overview of the types of PCDD/F contaminated sites that exist as a result of historical activities. It details the various processes whereby these sites became contaminated and attempts to evaluate their contemporary relevance as sources of PCDD/Fs and other POPs. It also details the various strategies used to assess these historical legacies of contamination and the concepts developed, or which are under development, to effect their remediation. MAIN FEATURES: Special sessions on 'Contaminated sites--Cases, remediation, risk and policy' were held at the DIOXIN conferences in 2006 and 2007, and this theme will be continued at DIOXIN 2008 to be held in Birmingham. Selected cases from the approximately 70 contributions made to these sessions, together with some additional invited case studies are outlined together with the key issues they raise. By evaluating these cases and adding details of experiences published in the current literature, an overview will be given of the different features and challenges of dioxin and POP-contaminated sites. RESULTS: This article provides a systematic categorisation of types of PCDD/F and POP-contaminated sites. These are categorised according to the chemical or manufacturing process, which generated the PCDD/Fs or POPs and also includes the use and disposal aspects of the product life cycle in question. The highest historical PCDD/F and dioxin-like polychlorinated biphenyl (PCB) contamination burdens have arisen as a result of the production of chlorine and of chlorinated organic chemicals. In particular, the production of chlorinated pesticides, PCBs and the related contaminated waste streams are identified being responsible for historical releases of toxic equivalents (TEQs) at a scale of many tonnes. Along with such releases, major PCDD/F contaminated sites have been created through the application or improper disposal of contaminated pesticides, PCBs and other organochlorine chemicals, as well through the recycling of wastes and their attempted destruction. In some extreme examples, PCDD/F contaminated sites have also resulted from thermal processes such as waste incinerators, secondary metal industries or from the recycling or deposition of specific waste (e.g. electronic waste or car shredder wastes), which often contain chlorinated or brominated organic chemicals. The examples of PCDD/F and dioxin-like PCB contamination of fish in European rivers or the impact of contaminated sites upon fishing grounds and upon other food resources demonstrate the relevance of these historical problems to current and future human generations. Many of the recent food contamination problems that have emerged in Europe and elsewhere demonstrate how PCDD/F and dioxin like PCBs from historical sources can directly contaminate human and animal feedstuffs and indeed highlight their considerable contemporary relevance in this respect. Accordingly, some key experiences and lessons learnt regarding the production, use, disposal and remediation of POPs from the contaminated sites are summarised. DISCUSSION: An important criterion for evaluating the significance and risks of PCDD/Fs and other POPs at contaminated sites is their present or future potential for mobility. This, in turn, determines to a large degree their propensity for off-site transport and environmental accessibility. The detailed evaluation of contaminated site cases reveals different site-specific factors, which influence the varied pathways through which poor water-soluble POPs can be mobilised. Co-contaminants with greater water solubility are also typically present at such sites. Hence, pumping of groundwater (pump and treat) is often required in addition to attempting to physically secure a site. At an increasing number of contaminated sites, securing measures are failing after relatively short time spans compared to the time horizon, which applies to persistent organic pollutant contamination. Due to the immense costs and challenges associated with remediation of contaminated sites 'monitored natural attenuation' is increasingly gaining purchase as a conceptual remediation approach. However, these concepts may well prove limited in their practical application to contaminated sites containing persistent organic pollutants and other key pollutants like heavy metals. CONCLUSIONS: It is inevitable, therefore, that dioxin/POP-contaminated sites will remain of contemporary and future relevance. They will continue to represent an environmental issue for future generations to address. The securing and/or remediation of dioxin/POP-contaminated sites is very costly, generally in the order of tens or hundreds of millions of dollars. Secured landfills and secured production sites need to be considered as constructions not made for 'eternity' but built for a finite time scale. Accordingly, they will need to be controlled, supervised and potentially repaired/renewed. Furthermore, the leachates and groundwater impacted by these sites will require ongoing monitoring and potential further remediation. These activities result in high maintenance costs, which are accrued for decades or centuries and should, therefore, be compared to the fully sustainable option of complete remediation. The contaminated site case studies highlight that, while extensive policies and established funds for remediation exist in most of the industrialised western countries, even these relatively well-regulated and wealthy countries face significant challenges in the implementation of a remediation strategy. This highlights the fact that ultimately only the prevention of contaminated sites represents a sustainable solution for the future and that the Polluter Pays Principle needs to be applied in a comprehensive way to current problems and those which may emerge in the future. RECOMMENDATIONS AND PERSPECTIVES: With the continuing shift of industrial activities in developing and transition economies, which often have poor regulation (and weak self-regulation of industries), additional global challenges regarding POPs and other contaminated sites may be expected. In this respect, a comprehensive application of the "polluter pays principle" in these countries will also be a key to facilitate the clean-up of contaminated areas and the prevention of future contaminated sites. The threats and challenges of contaminated sites and the high costs of securing/remediating the problems highlight the need for a comprehensive approach based upon integrated pollution prevention and control. If applied to all polluting (and potentially polluting) industrial sectors around the globe, such an approach will prove to be both the cheapest and most sustainable way to underpin the development of industries in developing and transition economies.     

Tyrosinase-modified carbon felt-based flow-biosensors: The role of ultra-sonication in shortening the enzyme immobilization time and improving the sensitivity for p-chlorophenol

Tyrosinase (TYR) was covalently immobilized onto amino-functionalized carbon felt surface via glutaraldehyde-coupling under ultrasonic treatment for 10 min. The resulting TYR-immobilized carbon felt was used as a working electrode unit of bioelectrocatalytic flow-through detector for TYR substrates (catechol, p-chlorophenol (p-CP), p-cresol, phenol etc.). Cathodic peak currents based on the electroreduction of enzymatically produced o-quinones were detected at –50 mV vs. Ag/AgCl. Compared with previous work in which TYR was immobilized onto amino-functionalized carbon felt for 16 hr without the ultrasonic treatment, we succeeded in (1) shortening the enzyme immobilization time from 16 hr to 10 min, (2) enhancing the sensitivity of p-CP, and (3) improving the operational stability of p-CP. The ultrasonic treatment during the TYR immobilization step would lead to certain changes in the structure of the immobilized TYR and the morphology of the immobilized TYR-layer on the carbon felt surface.     

我国填埋场改造及发展方向的探讨

对我国部分生活垃圾填埋场和室内填埋设施的填埋气组分进行了现场测试和分析,结果表明,厌氧填埋场的CH₄含量高,半好氧填埋场CH₄含量很低。并针对我国填埋场的现状提出了如果打算利用填埋气进行发电,填埋构造可以作成厌氧填埋,否则,填埋场应以安全性为 主,应建造成半好氧结构。      

Research on leachate recirculation from different types of landfills

Landfills can produce a great amount of leachate containing highly concentrated organic matter. This is especially true for the initial leachate from landfilled municipal solid wastes (MSW) that generally has concentrations of COD(Cr) and BOD(5) up to 80,000 and 50,000mg/L, respectively. The leachate could be disposed by means of recirculating technique, which decomposes the organics through the action of proliferating microorganisms and thereby purifies the leachate, and simultaneously accelerates organic decomposition through water saturation control. Data from experimental results indicated that leachate recirculating could reduce the organic concentration considerably, with a maximum reduction rate of COD(Cr) over 95%; and, using a semi-aerobic process, NH(3)-N concentration of treated leachate could be under 10mg/L. In addition, the organic concentration in MSW decreased greatly.     

Assays of dioxins and dioxin-like compounds in actually contaminated soils using transgenic tobacco plants carrying a recombinant mouse aryl hydrocarbon receptor-mediated β-glucuronidase reporter gene expression system

The transgenic tobacco plant XD4V-26 carrying the recombinant mouse aryl hydrocarbon receptor XD4V-mediated β-glucuronidase (GUS) reporter gene expression system was used for assay of dioxins and dioxin-like compounds consisting of polychlorodibenzo-p-dioxins, polychlorinated dibenzofurans, and coplanar polychlorinated biphenyls (Co-PCBs) in actually contaminated soils. The transgenic tobacco plant XD4V-26 showed a significant dose-dependent induced GUS activity when cultured on MS medium containing PCB126 [toxic equivalency factor (TEF) = 0.1]. In contrast, PCB169 and PCB180, which have 0.03 of TEF and unassigned TEF values, respectively, did not significantly induce GUS activity under the same conditions as with PCB126. When the tobacco plants were cultivated for up to 5 weeks on actually contaminated soils with dioxins and dioxin-like compounds collected from the periphery of an incinerator used for disposal of life and industrial wastes, GUS activity in the leaves was dose-dependently increased. The plants clearly detected 360 pg-TEQ g(-1) of dioxins and dioxin-like compounds in this assay. There was a positive correlation between GUS activity and TEQ value of dioxins and dioxin-like compounds in the plants. This assay does not require any extraction and purification processes for the actually contaminated soil samples.     

Assays of dioxins and dioxin-like compounds in actually contaminated soils using transgenic tobacco plants carrying a recombinant mouse aryl hydrocarbon receptor-mediated β-glucuronidase reporter gene expression system

The transgenic tobacco plant XD4V-26 carrying the recombinant mouse aryl hydrocarbon receptor XD4V-mediated β-glucuronidase (GUS) reporter gene expression system was used for assay of dioxins and dioxin-like compounds consisting of polychlorinated dibenzeno-p-dioxins, polychlorinated dibenzofurans, and coplanar polychlorinated biphenyls (Co-PCBs) in actually contaminated soils. The transgenic tobacco plant XD4V-26 showed a significant dose-dependent induced GUS activity when cultured on MS medium containing PCB126 [toxic equivalency factor (TEF) = 0.1]. In contrast, PCB169 and PCB180, which have 0.03 of TEF and unassigned TEF values, respectively, did not significantly induce GUS activity under the same conditions as with PCB126. When the tobacco plants were cultivated for up to 5 weeks on actually contaminated soils with dioxins and dioxin-like compounds collected from the periphery of an incinerator used for disposal of residential and industrial wastes, GUS activity in the leaves was dose-dependently increased. The plants clearly detected 360 pg-TEQ g^?1 of dioxins and dioxin-like compounds in this assay. There was a positive correlation between GUS activity and TEQ value of dioxins and dioxin-like compounds in the plants. This assay does not require any extraction and purification processes for the actually contaminated soil samples.     

Fluxes of carbon dioxide, methane and nitrous oxide in two contrastive fringing zones of coastal lagoon, Lake Nakaumi, Japan

We measured fluxes of carbon dioxide (CO(2)), methane (CH(4)), and nitrous oxide (N(2)O) simultaneously in two typical fringing zones, sandy shore and salt marsh, of coastal lagoon, Lake Nakaumi, Japan, in mid-summer 2003. Our aim was to quantify net the greenhouse gases (GHGs) fluxes and examine key factors, which control variation of the GHGs fluxes in the two sites. Net CO(2) and CH(4) fluxes were markedly different between the two sites; magnitudes and variations of the both fluxes in sandy shore were lower than those of salt marsh. Meanwhile, magnitude and variation of net N(2)O flux in the two sites were similar. In sandy shore, temporal and spatial variation of the three GHGs fluxes were highly controlled by water level fluctuation derived from astronomic tide. In salt marsh, spatial variation of the three GHGs fluxes were correlated with aboveground biomass, and temporal variation of CO(2) and CH(4) fluxes were correlated with soil temperature. The sum of global warming potential, which was roughly estimated using the observed GHGs fluxes, was ca. 174-fold higher in salt marsh than in sandy shore.     

Control of metal toxicity, effluent COD and regeneration of gel beads by immobilized sulfate-reducing bacteria

Over the last few decades, the use of sulfate-reducing bacteria (SRB) in the treatment of heavy-metal containing wastewaters including acid mine drainage has become a topic of scientific and commercial interest. However, technical difficulties such as the sensitivity of SRB to toxic metals and high effluent COD limit the widespread use of SRB in high heavy-metal containing wastewater. The aim of this study was to clarify the reasons why the immobilized SRB sludge with inner cohesive carbon source (ISIS) process can endure high metal toxicity and decrease effluent COD. The ISIS process can physically set apart SRB and free the system of external influences such as the surrounding toxic metallic ions, as well as form inner carbon sources to avoid high effluent COD. Metal toxicity and bead durability are the two major factors which influence the regeneration and reuse of gel beads. Reuse of suspended SRB sludge and beads crosslinked with boric acid were unsuccessful due to metal toxicity and agglomeration of beads, respectively. However, beads crosslinked with ammonium sulfate prevented agglomeration of beads allowing successful bead regeneration and reuse. The result of four cyclic trials showed that over 99% of zinc was removed in each trial using these beads.     

Atmospheric monitoring of organochlorine pesticides across some West African countries

Most African countries have ratified the Stockholm Convention on persistent organic pollutants (POPs) and are expected to reduce emissions of POPs such as organochlorine pesticides (OCPs) to the atmosphere. Emerging evidence, however, suggests that there are contemporary sources of OCPs in African countries despite the global ban on these products. This study investigated the atmospheric contamination from OCPs in four West African countries—Togo, Benin, Nigeria, and Cameroon—to ascertain the emission levels of OCPs and the characteristic signatures of contamination. Polyurethane foam (PUF) disk passive air samplers (PAS) were deployed in each country for ca. 55 days in 2012 and analyzed for 25 OCPs. Hexachlorocyclohexanes (HCHs) and DDTs constituted the highest burden of atmospheric OCPs in the target countries, at average concentrations of 441 pg m^?3 (range 23–2718) and 403 pg m^?3 (range 91–1880), respectively. Mirex had the lowest concentration, ranged between 0.1 and 3.3 pg m^?3. The concentration of OCPs in rainy season was higher than in dry season in Cameroon, and presupposed inputs from agriculture during the rainy season. The concentrations of ∑25 OCPs in each country were in the following order: Cameroon > Nigeria > Benin > Togo. There was significant evidence, based on chemical signatures of the contamination that DDT, aldrin, chlordane, and endosulfan were recently applied at certain sites in the respective countries.