A detailed investigation of ambient aerosol composition and size distribution in an urban atmosphere

This research was executed between March 2009 and March 2010 to monitor particulate matter size distribution and its composition in Istanbul. Particulate matter composition was determined using ion chromatography and inductively coupled plasma optical emission spectrometry. The sampling point is adjacent to a crowded road and the Bosporus Strait. Two prevailing particulate modes are found throughout PM₁₀ by sampling with a nine-stage low-volume cascade impactor. First mode in the fine mode is found to be between 0.43 and 0.65 μm, whereas the other peak was observed between 3.3 and 4.7 μm, referring to the coarse mode. The mean PM₁₀ concentration was determined as 41.2 μg/m³, with a standard deviation of 16.92 μg/m³. PM_0.43 had the highest mean concentration value of 10.67 μg/m³, making up nearly one fourth of the total PM₁₀ mass. For determining the effect of traffic on particulate matter (PM) composition and distribution, four different sampling cycles were applied: entire day, nighttime, rush hour, and rush hour at weekdays. SO ₄ ^?2 and organic carbon/elemental carbon proportions are found to be lower in night samples, representing a decrease in traffic. The long-range transports of dust storms were observed during the sampling periods. Their effects were determined analytically and their route models were run by the HYSPLIT model and validated through satellite photographs taken by the NASA Earth Observatory.     

Estimation of transport parameters of phenolic compounds and inorganic contaminants through composite landfill liners using one-dimensional mass transport model

One-dimensional (1D) advection–dispersion transport modeling was conducted as a conceptual approach for the estimation of the transport parameters of fourteen different phenolic compounds (phenol, 2-CP, 2-MP, 3-MP, 4-MP, 2-NP, 4-NP, 2,4-DNP, 2,4-DCP, 2,6-DCP, 2,4,5-TCP, 2,4,6-TCP, 2,3,4,6-TeCP, PCP) and three different inorganic contaminants (Cu, Zn, Fe) migrating downward through the several liner systems. Four identical pilot-scale landfill reactors (0.25 m³) with different composite liners (R1: 0.10 + 0.10 m of compacted clay liner (CCL), L_e = 0.20 m, k_e = 1 × 10⁻⁸ m/s, R2: 0.002-m-thick damaged high-density polyethylene (HDPE) geomembrane overlying 0.10 + 0.10 m of CCL, L_e = 0.20 m, k_e = 1 × 10⁻⁸ m/s, R3: 0.002-m-thick damaged HDPE geomembrane overlying a 0.02-m-thick bentonite layer encapsulated between 0.10 + 0.10 m CCL, L_e = 0.22 m, k_e = 1 × 10⁻⁸ m/s, R4: 0.002-m-thick damaged HDPE geomembrane overlying a 0.02-m-thick zeolite layer encapsulated between 0.10 + 0.10 m CCL, L_e = 0.22 m, k_e = 4.24 × 10⁻⁷ m/s) were simultaneously run for a period of about 540 days to investigate the nature of diffusive and advective transport of the selected organic and inorganic contaminants. The results of 1D transport model showed that the highest molecular diffusion coefficients, ranging from 4.77 × 10⁻¹⁰ to 10.67 × 10⁻¹⁰ m²/s, were estimated for phenol (R4), 2-MP (R1), 2,4-DNP (R2), 2,4-DCP (R1), 2,6-DCP (R2), 2,4,5-TCP (R2) and 2,3,4,6-TeCP (R1). For all reactors, dispersion coefficients of Cu, ranging from 3.47 × 10⁻⁶ m²/s to 5.37 × 10⁻² m²/s, was determined to be higher than others obtained for Zn and Fe. Average molecular diffusion coefficients of phenolic compounds were estimated to be about 5.64 × 10⁻¹⁰ m²/s, 5.37 × 10⁻¹⁰ m²/s, 2.69 × 10⁻¹⁰ m²/s and 3.29 × 10⁻¹⁰ m²/s for R1, R2, R3 and R4 systems, respectively. The findings of this study clearly indicated that about 35–50% of transport of phenolic compounds to the groundwater is believed to be prevented with the use of zeolite and bentonite materials in landfill liner systems.     

Effect of organic residues addition on the technological properties of clay bricks

The objective of this study is to investigate the utilization potential of several organic residues in clay bricks. Sawdust, tobacco residues, and grass are widespread by-products of industrial and agricultural processes in Turkey. These residue materials have long cellulose fibres. Sawdust and tobacco residues generally are used as fuel, and the grass is utilized for agricultural purposes. The insulation capacity of brick increases with the increasing porosity of the clay body. Combustible, organic types of pore-forming additives are most frequently used for this purpose. For this reason, increasing amounts of organic residues (0%, 2.5%, 5% and 10% in wt.) were mixed with raw brick-clay. All samples were fired at 900 degrees C. Effects on shaping, plasticity, density, and mechanical properties were investigated. The organic residue additions were found to be effective for pore-forming in the clay body with the clay maintaining acceptable mechanical properties. It was observed that the fibrous nature of the residues did not create extrusion problems. However, higher residue addition required a higher water content to ensure the right plasticity. As a result, sawdust, tobacco residues, and grass can be utilized in an environmentally safe way as organic pore-forming agents in brick-clay.     

Decolorization of remazol yellow RR gran by white rot fungus Phanerochaete chrysosporium

In this study, the removal of color, chemical oxygen demand (COD) and aromatic group from one of the azo dyes, Remazol Yellow RR Gran, had been carried out by using one of the white rot fungi, Phanerochaete chrysosporium. Experimental studies were performed in growth media containing different amounts of dye and glucose. Color measurements were done at 436nm wavelength using spectrophotometer while aromatic group measurements were done at 280 nm wavelength using UV/Visible spectrophotometer. As a result of this study the values of the removable color concentration were determined as 10 mgl(-1) and lower. The optimum medium glucose concentration was determined to be 2 gl(-1) during color removal processes, aromatic group measurements were done in samples in the UV region at 280 nm wavelength. As a result of the measurements, it was shown that certain amount of aromatic group remained in the model wastewater at the end of the process.     

Determination of heavy metal concentrations in street dusts in Istanbul E-5 highway

Components and quantity of street dust are environmental pollution indicators especially in big cities. Street dust is generally composed of car exhaust gas originated particles and wind-transported particles. Heavy metals, which are found in street dust, such as Pb, Cu, Mn, Zn, Cd and Ni are significant for environmental pollution. According to the kind of vehicle in traffic, quantity and type of heavy metals vary in street dust. The use of leaded gasoline gives a boost to the importance of lead level especially in street dust even at the start of 21st century. These metals possess bioaccumulation property, and the possibility of the amount of these metals reaching a critical value and threatening human health increases the importance of this issue. In this study, street dusts have been collected from E-5 Highway from Topkapi to Avcilar regions that spans about 18 km in Istanbul, Turkey, and Pb, Cu, Mn, Zn, Cd and Ni concentrations have been detected in street dust. Twenty-two street dust samples were taken from a total of 22 different points at previously decided 14 main areas. Analyses were conducted using Leeds Public Analyst method. According to the results of this study, Pb, Cu and Zn concentrations in E-5 Highway between Topkapi and Avcilar region in Istanbul were higher than maximum concentration levels of these heavy metals in normal soil. This situation indicates that there is heavy metal pollution in the inspected area in E-5 Highway in Istanbul.     

Iowa Statewide Stream Nitrate Load Calculated Using In Situ Sensor Network

Various techniques exist to estimate stream nitrate loads when measured concentration data are sparse. The inherent uncertainty associated with load estimation, however, makes tracking progress toward water quality goals more difficult. We used high‐frequency, in situ nitrate sensors strategically deployed across the agricultural state of Iowa to evaluate 2016 stream concentrations at 60 sites and loads at 35 sites. The generated data, collected at an average of 225 days per site, show daily average nitrate‐N yields ranging from 12 to 198 g/ha, with annual yields as high as 53 kg/ha from the intensely drained Des Moines Lobe. Thirteen of the sites that capture water from 82.5% of Iowa's area show statewide nitrate‐N loading in 2016 totaled 477 million kg, or 41% of the load delivered to the Mississippi–Atchafalaya River Basin (MARB). Considering the substantial private and public investment being made to reduce nitrate loading in many states within the MARB, networks of continuous, in situ measurement devices as described here can inform efforts to track year‐to‐year changes in nitrate load related to weather and conservation implementation. Nitrate and other data from the sensor network described in this study are made publicly available in real time through the Iowa Water Quality Information System.     

The effects of exposure of 60Co on the oxidant/antioxidant status among radiation victims

This retrospective study has been performed with radiation victims who were accidentally exposed to a 60Co source and its release into the environment. The aim of the study was to assess the effects of elevated radiation exposures on plasma level, on erythrocyte thio barbituric acid reactive substance (TBARS) level and on erythrocyte glutathione (GSH) levels. Patients were treated in different hospitals with different symptoms such as nausea, vomiting, dizziness, along with severe anemia in some patients. Blood samples were collected 3-5 days following the radiation accident. Increases in plasma (6.25 +/- 0.90 nmol ml(-1)) and erythrocyte TBARS levels (330.5 +/- 30.5 micromol gHb(-1)) were found in comparison to a healthy group (3.72 +/- 0.68 nmol ml(-1) and 150.7 +/- 20.5 micromol gHb(-1), respectively) at a significant level (p<0.001). Erythrocyte GSH levels (5.2 +/- 0.30 micromol gHb(-1)) were found to be decreased among the victims (healthy group: 10.2 +/- 0.7 micromol gHb(-1)) at the same significance level (p<0.001). These observations confirm a significant change induced by radiation in the oxidant/antioxidant status among the victims. It is suggested here that antioxidant supplementation therapy might be effective in preventing the harmful effects of 60Co radiation among radiation victims.     

Assessment of risk factors in forest road design and construction activities with fuzzy analytic hierarchy process approach in Turkey

Forest road design and construction are time-consuming and complicated because various risk factors can be encountered during the process. The aim of this study is to comprehensively assess the risk factors in forest road design and construction using the fuzzy analytic hierarchy process (AHP) method in Turkey, thus contributing to the proper performance of these activities. Within the scope of the study, six main risk factors and 22 sub-risk factors were identified based on literature review. In order to determine the weights of the relevant risk factors, the opinions of three different groups [(group 1: academicians), (group 2: forest engineers (private sector employees + public sector employees)), (group 3: group 1 + group 2)] about the risk factors were obtained. Relevant risk factor weights were determined using the fuzzy AHP method. According to group 3, the most important main risk factors are technical risks and environmental risks. In addition, the most important sub-risk factors for each relevant main risk factor were incorrect road alignment, inadequate work safety in the field, insufficient capital, legal problems on the road alignment, landslide risk during road construction, and illegal logging. Differences were observed between groups 1 and 2 in the weight rankings of relevant risk factor. The results demonstrate that the fuzzy AHP method can be used effectively to assess the risks of forest road design and construction.     

Metal accumulation in sediment,water, and freshwater fish in a Dam Lake

Metal concentrations were determined in water, sediment, and freshwater fish samples (Squalus cephalus, Barbus esocinus, and Barbus xanthopterus) collected from Karakaya Dam Lake, Turkey, to estimate the risk of human consumption and pollution. Metal concentrations differed between the species (p??Zn?=?Cu in water and Fe?>?Zn?>?Mn?>?Ni?>?Cu in sediment. In general, the accumulation order of elements in the tissues all of the species sampled were found as Fe?>?Zn?>?Se?>?Mn?>?Cu?>?Ni?>?Cd in muscle, Zn?>?Fe?>?Mn?>?Se?>?Cu?>?Ni?>?Cd in gills, Fe?>?Zn?>?Se?>?Mn?>?Cu?>?Ni?>?Cd in liver and gonad, and Zn?>?Fe?>?Cu?>?Mn?>?Se?>?Ni?>?Cd in kidney. It was concluded that the fish from the dam lake are not heavily burdened with metals, but they should be controlled periodically to avoid excessive intake of trace metals by humans, and to monitoring the pollution of aquatic environment.     

Degradation of toluene and benzene by Trametes versicolor

In this study, biological degradation of non-polar monoaromatic compounds, benzene and toluene, by one of the white rot fungi, namely Trametes versicolor was analyzed and the biomass formed was determined. The studies were carried out in mediums which contain basic nutrients in certain amounts, toluene and benzene at concentrations of 50, 100, 200, 250 and 350 mg/l, pH at 5, temperature at 28 degrees C and rpm at 150. Within an incubation period of 48 hours, it was observed that, removal was completed in 4 hours when toluene concentration was 50 mg/l and was completed in 36 hours when concentration was 300 mg/l. Biodegradation was completed at the end of 4th hour at benzene concentration of 50 mg/l while it continued for 42 hours at the concentration of 300 mg/l. With the addition of veratryl alcohol (3,4-Dimethoxybenzyl alcohol) to the basic feed medium, the operation of the enzyme system gained speed and biodegradation completed in a shorter time period.