Solar and Tidal Modulations of Fecal Indicator Bacteria in Coastal Waters at Huntington Beach,California

The coastal waters at many beaches in California and the United States are afflicted with fecal pollution, which poses a health risk for people exposed to the water through recreational activities such as swimming, surfing, and diving. Identifying sources of pollution is complicated by oceanographic transport/mixing processes and the nonconservative behavior of microorganisms exposed to sunlight and hostile marine conditions. This article investigates the variation of fecal indicator bacteria (FIB) concentrations in the surf zone and the adjacent coastal marsh by applying autocorrelation and cross-correlation analyses that illustrate solar and tidal modulations. A steady state bioreactor model was developed to explain solar inactivation in the surf zone, whereas a dynamic model was applied to explain tidally influenced disturbances in the coastal marsh. These models applied to intensive monitoring datasets on FIB and environmental variables have provided insights into the biologic and physical processes controlling coastal water quality, specifically the influence of sunlight and tides on bacterial levels.     

In Vitro digestibility of selected polymers

In vitro digestibility of 10 polymers was studied. Only starch, starch blend, gelatin, and silk were more than 10% digested by the enzyme cocktail. Cellophane, polyhydroxy--valerate, pullulan, levan, shellac, ethylene vinyl alcohol, and polyethylene were less than 10% digestible. The implications from these data are that these materials would act physiologically as dietary fiber or residue.Paper presented at the Biodegradable Materials and Packaging Conference, September 22–23, 1993, Natick, Massachusetts.     

Compositional effects on the dynamic properties of municipal solid waste

Large-scale cyclic simple shear tests were conducted on reconstituted specimens of municipal solid waste (MSW) collected from the Tri-Cities landfill in Fremont, California, USA. The influence of waste composition and compacted unit weight on the shear wave velocity, small-strain shear modulus, and strain-dependent shear modulus reduction and damping ratio curves of MSW was investigated in these tests. Modulus reduction and damping ratio curves were evaluated over a strain range of 0.01-3%. Specimens were reconstituted using 100%, 65%, and 35%, by weight, of the material that passed through a 20mm screen and four different levels of compaction effort. All specimens were consolidated under a normal stress of 75 kPa prior to testing. The test results show a very strong dependence of shear wave velocity and small strain shear modulus on unit weight. Unit weight also had an influence on modulus reduction and damping ratio. Waste composition had a very strong influence on damping and also influenced shear wave velocity, small strain shear modulus, and modulus reduction. The interrelationship between unit weight and waste composition made it difficult to separate out the effects of these parameters.     

Surface-enhanced Raman spectroscopy for emerging contaminant analysis in drinking water

● Definition of emerging contaminants in drinking water is introduced. ● SERS and standard methods for emerging contaminant analysis are compared. ● Enhancement factor and accessibility of SERS hot spots are equally important. ● SERS sensors should be tailored according to emerging contaminant properties. ● Challenges to meet drinking water regulatory guidelines are discussed. Emerging contaminants (ECs) in drinking water pose threats to public health due to their environmental prevalence and potential toxicity. The occurrence of ECs in our drinking water supplies depends on their physicochemical properties, discharging rate, and susceptibility to removal by water treatment processes. Uncertain health effects of long-term exposure to ECs justify their regular monitoring in drinking water supplies. In this review article, we will summarize the current status and future opportunities of surface-enhanced Raman spectroscopy (SERS) for EC analysis in drinking water. Working principles of SERS are first introduced and a comparison of SERS and liquid chromatography-tandem mass spectrometry in terms of cost, time, sensitivity, and availability is made. Subsequently, we discuss the strategies for designing effective SERS sensors for EC analysis based on five categories—per- and polyfluoroalkyl substances, novel pesticides, pharmaceuticals, endocrine-disrupting chemicals, and microplastics. In addition to maximizing the intrinsic enhancement factors of SERS substrates, strategies to improve hot spot accessibilities to the targeting ECs are equally important. This is a review article focusing on SERS analysis of ECs in drinking water. The discussions are not only guided by numerous endeavors to advance SERS technology but also by the drinking water regulatory policy.     

Application of powdered activated carbon coating to fabrics in a hybrid filter to enhance mercury removal

Elemental mercury(Hg0) is predominant constituent of flue gas emitted from coal-fired power plants. Adsorption has been considered the best available technology for removal of Hg0 from flue gas. However, adsorbent injection increases the amount of ash generated. In the present study, powdered activated carbon(PAC) was coated on polytetrafluoroethylene/glass fiber filters to increase Hg0 removal while concurrently reducing the amount of ash generated. The optimal PAC coating rate was determined in laboratory experiments to ensure better Hg0 removal with low pressure drop. When PAC of particle size less than 45 μm was used, and the areal density was 50 g/m2, the pressure drop remained under 30 Pa while the Hg0 removal efficiency increased to 15.8% from4.3%. The Hg0 removal efficiency also increased with decrease in filtration velocity. The optimal PAC coating rate was applied on a hybrid filter(HF), which was combined with a bag filter and an electrostatic precipitator in a single chamber. Originally designed to remove fine particulates matter, it was retrofitted to the flue gas control device for simultaneous Hg0 removal. By employing the PAC coating, the Hg removal efficiency of the HF increased to 79.79% from 66.35%. Also, a temporary reduction in Hg removal was seen but this was resolved following a cleaning cycle in which the dust layer was removed.     

Modeling of road traffic noise and estimated human exposure in Fulton County, Georgia, USA

Environmental noise is a major source of public complaints. Noise in the community causes physical and socio-economic effects and has been shown to be related to adverse health impacts. Noise, however, has not been actively researched in the United States compared with the European Union countries in recent years. In this research, we aimed at modeling road traffic noise and analyzing human exposure in Fulton County, Georgia, United States. We modeled road traffic noise levels using the United States Department of Transportation Federal Highway Administration Traffic Noise Model implemented in SoundPLAN?. After analyzing noise levels with raster, vector and fa?ade maps, we estimated human exposure to high noise levels. Accurate digital elevation models and building heights were derived from Light Detection And Ranging survey datasets and building footprint boundaries. Traffic datasets were collected from the Georgia Department of Transportation and the Atlanta Regional Commission. Noise level simulation was performed with 62 computers in a distributed computing environment. Finally, the noise-exposed population was calculated using geographic information system techniques. Results show that 48% of the total county population [N=870,166 residents] is potentially exposed to 55 dB(A) or higher noise levels during daytime. About 9% of the population is potentially exposed to 67 dB(A) or higher noises. At nighttime, 32% of the population is expected to be exposed to noise levels higher than 50 dB(A). This research shows that large-scale traffic noise estimation is possible with the help of various organizations. We believe that this research is a significant stepping stone for analyzing community health associated with noise exposures in the United States.     

Indoor and outdoor bioaerosol levels at recreation facilities, elementary schools, and homes

One major deficiency in linking environmental exposure to health effects is the current lack of data on environmental exposure. Therefore, to address this issue, the present study measured the bacterial and fungal concentrations in the indoor and outdoor air from two types of recreation facility (42 bars and 41 Internet cafes), 44 classrooms at 11 elementary schools, and 20 homes under uncontrolled environmental conditions during both summer and winter. No major environmental problems were reported at the four microenvironments being investigated during the entire study period. Bacteria and fungi were found in all the air samples, and the environmental occurrence of individual fungi was in the order of Cladosprium, Penicillium, Aspergillus, and Alternaria. The six parameters surveyed in the present study were all found to influence the indoor and outdoor bioaerosol levels: microenvironment type, sampling time in elementary school classrooms, agar type for measuring the fungal species, seasonal variation, facility location, and summer survey periods. The indoor and outdoor air concentrations of bacteria and fungi found in this study were comparable to those in other reports, with GM values for the total bacteria and total fungi between 10 and 10³ colony-forming units per cubic meter of air (CFU m⁻³). The fungal concentrations found at most of the indoor environments fell within the specified guidelines of the American Conference of Government Industrial Hygienists (ACGIH), between 100 and 1000 CFU m⁻³ for the total fungi. However, the indoor bioaerosol concentrations at most of the surveyed environments exceeded the Korean indoor bioaerosol guideline (800 CFU m⁻³). Consequently, the current findings suggest the need for reducing strategy for indoor microorganisms at the surveyed microenvironments.     

Gene expression analysis and classification of mode of toxicity of polycyclic aromatic hydrocarbons (PAHs) in Escherichia coli

Escherichia coli is known to respond to certain toxic chemicals through an increased expression of various stress genes. In this study, therefore, the expression of recA, katG, fabA and grpE genes was used as a representative for DNA, oxidative, membrane and protein damage, respectively, after E. coli was exposed to different polycyclic aromatic hydrocarbons (PAHs), i.e., phenanthrene, naphthalene and benzo[a]pyrene. To accomplish this, the expression levels of these four genes were quantified using a real-time RT-PCR analysis when E. coli cultures were under stressful conditions, such as those caused by an exposure to mitomycin C, hydrogen peroxide and phenol. It was found that the primary toxic effect of each chemical is clearly seen when the expression levels of the different genes are compared. Tests with the PAHs showed naphthalene and benzo[a]pyrene to be genotoxic, while phenanthrene had no clear effect on the expression of any of these genes. Based on these results, the effects due to these toxic chemicals and the extent of each stress can be evaluated with ease using the expression levels of different stress responsive genes.     

Emissions of polychlorinated biphenyls (PCBs) from sludge drying beds to the atmosphere in Chicago

Ambient air PCB concentrations in the Lake Calumet region in Southeast Chicago have been found to be significantly higher than in nearby non-urban areas. This area is highly industrialized and also contains municipal sludge drying facilities and landfills. In an effort to quantify the importance of the sludge drying facilities to the elevated concentrations, upwind/downwind air samples from the Calumet East sludge drying bed were obtained between April and October 2002. For these samples, the downwind minus upwind (downwind-upwind) concentration varied from 0.33 to 1.27ngm(-3) for non-northeast (NE) direction winds suggesting sludge drying is a source of PCBs to the atmosphere. However, the upwind concentrations were higher than the downwind for winds from the NE of the sampling site suggesting more significant source(s), possibly Lake Calumet or the so called "Cluster site" NE of the sludge drying beds. Flux chamber experiments carried out during the sampling period measured average PCB fluxes of 210ngm(-2)h(-1) (range 43-910ngm(-2)h(-1)) which resulted in an overall flux of 0.005kgday (d)(-1) ( approximately 2kgyr(-1)). A developed regression equation between moisture content and sludge concentration estimated higher PCB losses of 0.26kgd(-1) ( approximately 95kgyr(-1)). Although these two approaches yielded different values, they both indicate that the emission from the Calumet East sludge drying beds were of minimal importance when compared to the total estimated amount of 2-70kgd(-1) (700-2100kgyr(-1)) of PCBs entering the Chicago atmosphere.     

Distribution of dioxins, furans, and dioxin-like PCBs in solid products generated by pyrolysis and melting of automobile shredder residues

Polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls (PCBs) in char and slag produced from automobile shredder residue by pyrolysis and melting process were analyzed to measure changes in the characteristics and distribution of their congeners caused by thermal treatment. In particular, a large quantity of dioxin-like PCBs occurred in low-chlorinated congeners. The concentration of PCDDs/PCDFs in char was 0.542 microg/kg, with mostly PCDFs dominant and its toxicity equivalent concentration (TEQ) was about 70ngTEQ/kg. The concentration and toxicity equivalent concentration of dioxin-like PCBs in char were 0.869 microg/kg and 1.60ngTEQ/kg, respectively. Melted char slag was produced using various cooling methods: water quenching, air cooling, and slow cooling. The concentrations of PCDDs/PCDFs in slag produced by the methods were 1.51, 1.38, and 2.43ngTEQ/kg, respectively; those of dioxin-like PCBs were close to 0.01ngTEQ/kg. The congener distributions varied only slightly among the cooling methods. Applying melting procedure to char reduced PCDD/PCDF concentration by 95.3%, and the corresponding TEQ concentration was reduced by 97.9%. We thus conclude that melting process is an efficient way to reduce the concentrations of PCDDs/PCDFs in solids produced by pyrolysis.