Temporal and Spatial Trends in Nutrient and Sediment Loading to Lake Tahoe,California‐Nevada,USA

Since 1980, the Lake Tahoe Interagency Monitoring Program (LTIMP) has provided stream‐discharge and water quality data—nitrogen (N), phosphorus (P), and suspended sediment—at more than 20 stations in Lake Tahoe Basin streams. To characterize the temporal and spatial patterns in nutrient and sediment loading to the lake, and improve the usefulness of the program and the existing database, we have (1) identified and corrected for sources of bias in the water quality database; (2) generated synthetic datasets for sediments and nutrients, and resampled to compare the accuracy and precision of different load calculation models; (3) using the best models, recalculated total annual loads over the period of record; (4) regressed total loads against total annual and annual maximum daily discharge, and tested for time trends in the residuals; (5) compared loads for different forms of N and P; and (6) tested constituent loads against land use‐land cover (LULC) variables using multiple regression. The results show (1) N and P loads are dominated by organic N and particulate P; (2) there are significant long‐term downward trends in some constituent loads of some streams; and (3) anthropogenic impervious surface is the most important LULC variable influencing water quality in basin streams. Many of our recommendations for changes in water quality monitoring and load calculation methods have been adopted by the LTIMP.     

Scale-up of electrochemical oxidation system for treatment of produced water generated by Brazilian petrochemical industry

Scale-up of anodic oxidation system is critical to the practical application of electrochemical treatment in bio-refractory organic wastewater treatment. In this study, the scale-up of electrochemical flow system was investigated by treating petrochemical wastewater using platinized titanium (Ti/Pt) and boron-doped diamond (BDD) anodes. It was demonstrated that flow cell was successfully scaled-up because when it was compared with batch mode (Rocha et al. 2012b), higher performances on organic matter removal were achieved. Under the suitable operating conditions and better anode material, the chemical oxygen demand (COD) of petrochemical wastewater was reduced from 2,746 to 200 mg L^?1 within 5 h with an energy consumption of only 56.2 kWh m^?3 in the scaled-up BDD anode system. These results demonstrate that anode flow system is very promising in practical bio-refractory organic wastewater treatment.     

Formation of indoor nitrous acid (HONO) by light-induced NO<Subscript>2</Subscript> heterogeneous reactions with white wall paint

Gaseous nitrogen dioxide (NO₂) represents an oxidant that is present in relatively high concentrations in various indoor settings. Remarkably increased NO₂ levels up to 1.5 ppm are associated with homes using gas stoves. The heterogeneous reactions of NO₂ with adsorbed water on surfaces lead to the generation of nitrous acid (HONO). Here, we present a HONO source induced by heterogeneous reactions of NO₂ with selected indoor paint surfaces in the presence of light (300 nm?<?λ?<?400 nm). We demonstrate that the formation of HONO is much more pronounced at elevated relative humidity. In the presence of light (5.5 W m^?2), an increase of HONO production rate of up to 8.6?·?10⁹ molecules cm^?2 s^?1 was observed at [NO₂]?=?60 ppb and 50 % relative humidity (RH). At higher light intensity of 10.6 (W m^?2), the HONO production rate increased to 2.1?·?10¹⁰ molecules cm^?2 s^?1. A high NO₂ to HONO conversion yield of up to 84 % was observed. This result strongly suggests that a light-driven process of indoor HONO production is operational. This work highlights the potential of paint surfaces to generate HONO within indoor environments by light-induced NO₂ heterogeneous reactions.     

Detection of human-induced environmental disturbances in a show cave

Purpose  

We investigated the effects of human-induced disruption in a subterranean stable environment containing valuable Palaeolithic paintings and engravings (Ardales Cave, Southern Spain) using a double analytical approach.     

Evaluation of particulate matter abatement strategies for almond harvest

Almond harvest accounts for substantial PM10 (particulate matter [PM] < or =10 microm in nominal aerodynamic diameter) emissions in California each harvest season. This paper evaluates the effects of using reduced-pass sweepers and lower harvester separation fan speeds (930 rpm) on lowering PM emissions from almond harvesting operations. In-canopy measurements of PM concentrations were collected along with PM concentration measurements at the orchard boundary; these were used in conjunction with on-site meteorological data and inverse dispersion modeling to back-calculate emission rates from the measured concentrations. The harvester discharge plume was measured as a function of visible plume opacity during conditioning operations. Reduced-pass sweeping showed the potential for reducing PM emissions, but results were confounded because of differences in orchard maturity and irrigation methods. Fuel consumption and sweeping time per unit area were reduced when comparing a reduced-pass sweeper to a conventional sweeper. Reducing the separation fan speed from 1080 to 930 rpm led to reductions in PM emissions. In general, foreign matter levels within harvested product were nominally affected by separation fan speed in the south (less mature) orchard; however, in samples conditioned using the lower fan speed from the north (more mature) orchard, these levels were unacceptable.     

Films Made by Blending Poly(ε-Caprolactone) with Starch and Flour from Sagu Rhizome Grown at the Venezuelan Amazons

Starch-based composite films have been proposed as food packaging. In this context, the study of non-conventional starch sources (sagu, Canna edulis Kerr) has worldwide special attention, because these materials can impart different properties as carbohydrate polymers. A thorough study of the matrices used (sagu starch and flour) was carried out. In the same way, thermoplastic starch (TPS)/PCL blend and thermoplastic flour (TFS)/PCL blend were obtained by melt mixing followed by compression moulding containing glycerol as plasticizer. In this study, chemical composition of the matrices and their properties were related with the properties of the developed films. Moisture content, water solubility, X-ray diffraction, thermogravimetric analysis and mechanical and microstructural properties were evaluated in the films. Taking into account the results, the sagu flour has great potential as starchy source for food packaging applications. However, concretely the flour had lower compatibility with the PCL compared to the starch/PCL blend.     

Critical review of the building downwash algorithms in AERMOD

The only documentation on the building downwash algorithm in AERMOD (American Meteorological Society/U.S. Environmental Protection Agency Regulatory Model), referred to as PRIME (Plume Rise Model Enhancements), is found in the 2000 A&WMA journal article by Schulman, Strimaitis and Scire. Recent field and wind tunnel studies have shown that AERMOD can overpredict concentrations by factors of 2 to 8 for certain building configurations. While a wind tunnel equivalent building dimension study (EBD) can be conducted to approximately correct the overprediction bias, past field and wind tunnel studies indicate that there are notable flaws in the PRIME building downwash theory. A detailed review of the theory supported by CFD (Computational Fluid Dynamics) and wind tunnel simulations of flow over simple rectangular buildings revealed the following serious theoretical flaws: enhanced turbulence in the building wake starting at the wrong longitudinal location; constant enhanced turbulence extending up to the wake height; constant initial enhanced turbulence in the building wake (does not vary with roughness or stability); discontinuities in the streamline calculations; and no method to account for streamlined or porous structures.

Implications: This paper documents theoretical and other problems in PRIME along with CFD simulations and wind tunnel observations that support these findings. Although AERMOD/PRIME may provide accurate and unbiased estimates (within a factor of 2) for some building configurations, a major review and update is needed so that accurate estimates can be obtained for other building configurations where significant overpredictions or underpredictions are common due to downwash effects. This will ensure that regulatory evaluations subject to dispersion modeling requirements can be based on an accurate model. Thus, it is imperative that the downwash theory in PRIME is corrected to improve model performance and ensure that the model better represents reality.     

Radical precursors and related species from traffic as observed and modeled at an urban highway junction

Nitrous acid (HONO) and formaldehyde (HCHO) are important precursors for radicals and are believed to favor ozone formation significantly. Traffic emission data for both compounds are scarce and mostly outdated. A better knowledge of today's HCHO and HONO emissions related to traffic is needed to refine air quality models. Here the authors report results from continuous ambient air measurements taken at a highway junction in Houston, Texas, from July 15 to October 15, 2009. The observational data were compared with emission estimates from currently available mobile emission models (MOBILE6; MOVES [MOtor Vehicle Emission Simulator]). Observations indicated a molar carbon monoxide (CO) versus nitrogen oxides (NO_x) ratio of 6.01 ± 0.15 (r ² = 0.91), which is in agreement with other field studies. Both MOBILE6 and MOVES overestimate this emission ratio by 92% and 24%, respectively. For HCHO/CO, an overall slope of 3.14 ± 0.14 g HCHO/kg CO was observed. Whereas MOBILE6 largely underestimates this ratio by 77%, MOVES calculates somewhat higher HCHO/CO ratios (1.87) than MOBILE6, but is still significantly lower than the observed ratio. MOVES shows high HCHO/CO ratios during the early morning hours due to heavy-duty diesel off-network emissions. The differences of the modeled CO/NO_x and HCHO/CO ratios are largely due to higher NO_x and HCHO emissions in MOVES (30% and 57%, respectively, increased from MOBILE6 for 2009), as CO emissions were about the same in both models. The observed HONO/NO_x emission ratio is around 0.017 ± 0.0009 kg HONO/kg NO_x which is twice as high as in MOVES. The observed NO₂/NO_x emission ratio is around 0.16 ± 0.01 kg NO₂/kg NO_x, which is a bit more than 50% higher than in MOVES. MOVES overestimates the CO/CO₂ emission ratio by a factor of 3 compared with the observations, which is 0.0033 ± 0.0002 kg CO/kg CO₂. This as well as CO/NO_x overestimation is coming from light-duty gasoline vehicles.

Implications: Nitrous acid (HONO) and formaldehyde (HCHO) are important precursors for radicals that ultimately contribute to ozone formation. There still exist uncertainties in emission sources of HONO and HCHO and thus regional air quality modeling still tend to underestimate concentrations of free radicals in the atmosphere. This paper demonstrates that the latest U.S. Environmental Protection Agency (EPA) traffic emission model MOVES still shows significant deviations from observed emission ratios, in particular underestimation of HCHO/CO and HONO/NO_x ratios. Improving the performance of MOVES may improve regional air quality modeling.     

Bioindication of volatile elements emission by the Puyehue-Cordón Caulle (North Patagonia) volcanic event in 2011

The emission of volatile pollutants from the volcanic eruption of the Puyehue-Cordón Caulle complex (North Patagonia Andean Range) that started in June 4th, 2011, was investigated by bioindication means with the epyphytic fruticose lichen Usnea sp. The elemental composition of pooled samples made up with 10 lichen thalli were analysed by Instrumental Neutron Activation Analysis. Eleven sampling sites were selected within the impacted region at different distance from the volcanic source. Five sites were selected as they were already sampled in a previous study prior to the eruption. Two other new sampling sites were selected from outside the impacted zone to provide non-impacted baseline sites.The elements associated with the lichen incorporation of particulate matter (PM) of geological origin were identified by linear correlation with a geochemical tracer (Sm concentrations). The elements associated with PM uptake were Ce, Eu, Fe, Hf, La, Lu, Na, Nd, Sb, Sc, Se, Ta, Tb, Th, U, and Yb. Arsenic and Cs concentrations showed contributions exceeding the PM fraction in sites near the volcanic centre, also higher than the baseline concentrations, which could be associated with permanent emissions from the geothermal system of the Puyehue-Cordón Caulle complex. The lichen concentrations of Ba, Ca, Co, Hg, K, Rb, Sr, and Zn were not associated with the PM, not showing higher concentrations in the sites nearby the volcanic source or respect to the baseline values either. Therefore, there is no indication of the emission of volatile forms of these elements in the lichen records. The lichen records only identified Br volatile emissions associated with the Puyehue-Cordón Caulle complex eruption in 2011.     

Apple snails and their endosymbionts bioconcentrate heavy metals and uranium from contaminated drinking water

Purpose

The differential ability of apple snail tissues, endosymbionts, and eggs to bioaccumulate several metals (Sb, As, Ba, Br, Zn, Cr, Fe, Hg, Se, and U) was investigated.

Methods

Metal concentrations were determined by neutron activation analysis in several tissues, endosymbionts, and eggs from mature apple snails cultured in either drinking water or reconstituted water (prepared with American Society for Testing and Materials type I water).

Results

The highest bioconcentration factors (BCFs) in the midgut gland were found for Ba, Zn, Se, As, U, Br, and Hg (in decreasing order), while the highest in the kidney were for Ba, Br, and Hg. The foot showed the highest BCFs for Ba, Hg, Br, and Se (in decreasing order). Calcified tissues (uterus, shell) and eggs showed low BCFs, except for Ba. Both C corpuscles and gland tissue showed statistically higher BCFs than K corpuscles for Ba, Fe, U, Br, and Sb. The concentration of most of the studied elements was significantly lower in tissues and endosymbionts obtained from snails cultured in reconstituted water instead of drinking water. Snails cultured in reconstituted water and then exposed or not to Hg, As, and U (at the maximum contaminant level allowed by the US Environmental Protection Agency) also resulted in high levels accumulated in midgut gland, endosymbionts and kidney.

Conclusions

Our findings suggest that the midgut gland (and the symbionts contained therein), the kidney, and the foot of Pomacea canaliculata may be useful bioindicators of Hg, As and U pollution in freshwater bodies and that the unrestricted use of ampullariid snails as human and animal food must be considered with caution..