Process Modifications for Air Pollution Control in Neutral Sulfite Semi-Chemical Mills

The body of information presented in this paper is directed to those individuals concerned with the air pollution control problems of the pulp and paper industry operation. Process modifications introduced at two Company mills, at Big Island, Va. and Tomahawk, Wis., where neutral sulfite semichemical pulping of hardwoods is performed at rates of 550 and 630 tons per day, respectively, are discussed. The methodology and concepts used to minimize total reduced sulfur and total sulfur oxide emissions from the recovery furnace of one of the operations are explained. In another major improvement already implemented in the Big Island Mill conventional hydrogen sulfide emissions from the sulfiting tower, on the order of 8–10 lb as sulfur per ton of pulp, have been completely eliminated by a process modification technique. Other aspects of the operations are described, and a forecast of possible emission levels for mills with a newer technology is made.     

Magnetic Nanocrystalline Cellulose: Azithromycin Adsorption and In Vitro Biological Activity Against Melanoma Cells

Journal of Polymers and the Environment - This study reports a simple methodology of obtaining magnetic nanocrystalline cellulose under very mild conditions employing only Fe2+ as the iron source,...     

Geochemical characterisation of the thermo-mineral waters of Greece

Environmental Geochemistry and Health - Geothermal areas of Greece are located in regions affected by recent volcanism and in continental basins characterised by elevated heat flow. Many of them...     

Exposure to polychlorinated biphenyls in residents near a chemical factory in Italy: the food chain as main source of contamination

High levels of PCBs were recently found in soil, food and some farmers living close to a chemical factory which until the 1980s had produced polychlorinated biphenyls (PCBs) in Brescia, North Italy. We performed a survey on a random sample of subjects aged 20-79 years living in various areas of the town with different levels of soil pollution to investigate factors associated with increased levels of PCB in serum (24 congeners were tested). Total PCB values were closely related to age (Spearman r=0.68; p<0.0001). The 166 consumers of locally produced food had higher PCB levels than non-consumers (median=1143 versus 719; 95th centile=9301 versus 2635ng/g lipid) with the highest levels among consumers of food produced in the most contaminated area close to the factory (median=2551; 95th centile=33464ng/g lipid). A dose-effect relationship between consumption of food produced in this area and PCB blood levels was observed (Spearman r=0.52, p=0.0014). Consumers of only plant food produced in this area had higher levels of PCB than non-consumers (median=1100; 95th centile=10,800ng/g lipid). Three subjects who had worked at the factory in the past showed high PCB levels. Distribution of PCB congeners did not differ between consumers of locally produced food and non-consumers, apart from PCB 209 which was found at high levels in former factory workers and was more common among consumers of food produced in the polluted area. In conclusion, we found high serum PCB levels in humans living in a highly polluted area in an industrialized town in Italy, due mainly to consumption of food produced in polluted areas.     

Chemical and biological characterisation of biofilms formed on different substrata in Tisza river (Hungary)

Natural biofilms were simultaneously grown on granite, polished granite, andesite, polycarbonate and Plexi-glass substrata for six weeks in the Tisza River. Biofilm production and abundance of algae were influenced by the substratum. Magnitude of the substratum effect was andesite相似文献   

Effects of wind direction on coarse and fine particulate matter concentrations in southeast Kansas

Field data for coarse particulate matter ([PM] PM10) and fine particulate matter (PM2.5) were collected at selected sites in Southeast Kansas from March 1999 to October 2000, using portable MiniVol particulate samplers. The purpose was to assess the influence on air quality of four industrial facilities that burn hazardous waste in the area located in the communities of Chanute, Independence, Fredonia, and Coffeyville. Both spatial and temporal variation were observed in the data. Variation because of sampling site was found to be statistically significant for PM10 but not for PM2.5. PM10 concentrations were typically slightly higher at sites located within the four study communities than at background sites. Sampling sites were located north and south of the four targeted sources to provide upwind and downwind monitoring pairs. No statistically significant differences were found between upwind and downwind samples for either PM10 or PM2.5, indicating that the targeted sources did not contribute significantly to PM concentrations. Wind direction can frequently contribute to temporal variation in air pollutant concentrations and was investigated in this study. Sampling days were divided into four classifications: predominantly south winds, predominantly north winds, calm/variable winds, and winds from other directions. The effect of wind direction was found to be statistically significant for both PM10 and PM2.5. For both size ranges, PM concentrations were typically highest on days with predominantly south winds; days with calm/variable winds generally produced higher concentrations than did those with predominantly north winds or those with winds from "other" directions. The significant effect of wind direction suggests that regional sources may exert a large influence on PM concentrations in the area.     

Unsaturated dicarbonyl products from the OH-initiated photo-oxidation of furan, 2-methylfuran and 3-methylfuran

This study presents the application of O-(2,3,4,5,6)-pentafluorobenzyl-hydroxylamine hydrochloride (PFBHA) on-fibre derivatisation Solid Phase Microextraction (SPME) to the sampling and quantification of the unsaturated 1,4-dicarbonyl products obtained in the photo-oxidation of furan, 2-methylfuran and 3-methylfuran with HONO: butenedial, 4-oxo-2-pentenal and 2-methylbutenedial, respectively. The use of Proton Transfer Reaction Mass Spectrometry (PTR-MS) is also considered and the advantages of the combined use of both methodologies is discussed. The 1,4 unsaturated dicarbonyl products sampled by SPME were quantified by GC-FID.The experiments were carried out in the EUPHORE outdoor simulation chambers. The results confirm that 1,4-dicarbonyls are the main products of the OH-initiated oxidation of furan and its methylated derivatives, a fact with environmental implications. Molar yields of (1.09 ± 0.41) and (0.90 ± 0.36) were obtained in two experiments of furan photo-oxidation. The yields of 4-oxo-2-pentenal and methylbutenedial were estimated to be (0.60 ± 0.24) and (0.83 ± 0.33) respectively, assuming the same SPME response factor as for butenedial. Furthermore, the unsaturated 1,4-dicarbonyls have also been identified in the chemical characterisation of the aerosols formed in the reactions. The yield of aerosols quantified were (8.5 ± 0.8)% in the photo-oxidation of furan, (1.85 ± 0.18)% in the photo-oxidation of 2-methylfuran and (5.5 ± 0.5)% in the photo-oxidation of 3-methylfuran, at the following concentrations of their precursors: 829 ± 249 ppbV and 748 ± 224 (in two furan experiments), 633 ± 190 in the 2-methylfuran and 641 ± 192 ppbV in the 3-methylfuran experiment.     

Minimization of water use and wastewater contaminant load

This communication describes a project concerning the minimization of water use and wastewater contaminant load in an industrial setting. The location was a plant manufacturing cast aluminum parts for the automotive industry. The water used for industrial purposes was some 16 000 m³/yr with COD values sometimes higher than 5000 mg O₂/l. After a preliminary assessment, a global reduction in industrial water consumption of 33%, by means of re-circulation of the aqueous solution used for de-molding was achieved, implying a 95% reduction in de-molding solution. To minimize water use even further, recommendations to the company included a revision of the refrigeration closed-circuit and a better control of water used for general services.     

Economic and environmental performance of electricity production in Finland: A multicriteria assessment framework

Meeting environmental, economic, and societal targets in energy policy is complex and requires a multicriteria assessment framework capable of exploring trade-offs among alternative energy options. In this study, we integrated economic analysis and biophysical accounting methods to investigate the performance of electricity production in Finland at plant and national level. Economic and environmental costs of electricity generation technologies were assessed by evaluating economic features (direct monetary production cost), direct and indirect use of fossil fuels (GER cost), environmental impact (CO₂ emissions), and global environmental support (emergy cost). Three scenarios for Finland's energy future in 2025 and 2050 were also drawn and compared with the reference year 2008. Accounting for an emission permit of 25 €/t CO₂, the production costs calculated for CHP, gas, coal, and peat power plants resulted in 42, 67, 68, and 74 €/MWh, respectively. For wind and nuclear power a production cost of 63 and 35 €/MWh were calculated. The sensitivity analysis confirmed wind power's competitiveness when the price of emission permits overcomes 20 €/t CO₂. Hydro, wind, and nuclear power were characterized by a minor dependence on fossil fuels, showing a GER cost of 0.04, 0.13, and 0.26 J/J_e, and a value of direct and indirect CO₂ emissions of 0.01, 0.04, and 0.07 t CO₂/MWh. Instead, peat, coal, gas, and CHP plants showed a GER cost of 4.18, 4.00, 2.78, and 2.33 J/J_e. At national level, a major economic and environmental load was given by CHP and nuclear power while hydro power showed a minor load in spite of its large production. The scenario analysis raised technological and environmental concerns due to the massive increase of nuclear power and wood biomass exploitation. In conclusion, we addressed the need to further develop an energy policy for Finland's energy future based on a diversified energy mix oriented to the sustainable exploitation of local, renewable, and environmentally friendly energy sources.     

PM10 and PM2.5 source apportionment in the Barcelona Metropolitan area, Catalonia, Spain

Levels of total suspended particles, PM10, PM2.5 and PM1 were continuously monitored at an urban kerbside in the Metropolitan area of Barcelona from June 1999 to June 2000. The results show that hourly levels of PM2.5 and PM1 are consistent with the daily cycle of gaseous pollutants emitted by traffic, whereas TSP and PM10 do not follow the same trend, at least in the diurnal period. The PM2.5/PM10 ratio is dependent on the traffic emissions, whereas additional contribution sources for the >10 μm fraction must be taken into account in the diurnal period. Different PM10 and PM2.5 source apportionment techniques were compared. A methodology based on the chemical determination of 83% of both PM10 and PM2.5 masses allowed us to quantify the marine (4% in PM10 and <1% in PM2.5), crustal (26% in PM10 and 8% in PM2.5) and anthropogenic (54% in PM10 and 73% in PM2.5) loads. Peaks of crustal contribution to PM10 (up to 44% of the PM10 mass) were recorded under Saharan air mass intrusions. A different seasonal trend was observed for levels of sulphate and nitrate, probably as a consequence of the different thermodynamic behaviour of these PM species and the higher summer oxidation rate of SO₂.