Traffic-related platinum and rhodium concentrations in the atmosphere of Rome

Platinum and Rh content in the atmosphere of Rome as released by car catalytic converters was monitored from 1998 to 2000 in six urban sites with different traffic intensities and in one rural area. Samples collected with medium-volume PM10 samplers were analyzed by Sector Field Inductively Coupled Plasma Mass Spectrometry (SF-ICP-MS). The Pt content varied from 2.4 to 60.1 pg m(-3) (mean value 17.8 pg m(-3)) at the urban locations whilst that of Rh spanned the range 0.8-9.4 pg m(-3) (average value 4.0 pg m(-3)). The rural area showed metal levels mostly below the limits of detection, pointing to automobile traffic as the main source of those elements in the urban atmosphere. The highest mean concentrations of Pt and Rh, ie. 22.2 and 5.0 pg m(-3), were detected along the ring road where the traffic density is high (>100,000 vehicles per day) and the driving speed between 100 and 120 km h(-1). The lowest Pt and Rh mean concentrations, i.e. 11.4 and 3.4 pg m(-3), were measured downtown, where traffic density is lower (20,000 vehicles per day) and the driving speed is limited (50 km h(-1)). Significant concentrations of Pt and Rh were found in the vicinity of traffic signals, indicating that the "stop-and-go" conditions might also affect their release. The measured Pt/Rh ratio spanned the range 3.3-5.9 in accordance with that present in the more commonly used gasoline car catalytic converters. Seasonal variations between wintertime (with Pt and Rh mean concentrations of 23.8 and 5.1 pg m(-3), respectively) and summertime (with Pt and Rh mean concentrations of 14.1 and 3.3 pg m(-3), respectively) were also observed.     

Variations in the level of some trace elements in hair of participants in the Italian expeditions in Antarctica

As a part the Italian National Programme of Research in Antarctica (PNRA) a monitoring study has been undertaken to quantify the concentrations of some selected trace elements in human hair of participants in the Antarctic expeditions. Such concentrations may vary as a consequence of the extreme environmental conditions and changes in lifestyle experienced by participants in the expeditions, as some evidence in previous investigations seems to suggest. The present study regards samples collected on the occasion of the 2002-2003 expedition to the Italian Base of Terra Nova Bay (now Mario Zucchelli Base), i.e., just before the expedition and about one month later. Seven essential elements were taken into account, namely, Ca, Cu, Cr, Fe, Mg, Mn and Mo. Determinations were performed by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) and Dynamic Reaction Cell Inductively Coupled Plasma Mass Spectrometry (DRC-ICP-MS). Data obtained were statistically treated by using the non-parametric Friedman test. The concentrations of Ca, Cu and Mg were found to decrease (P < 0.05). The stress caused by the severe environmental conditions might well play a role in the observed decrease.     

A framework for assessment and monitoring of small mammals in a lowland tropical forest

Development projects in tropical forests can impact biodiversity.Assessment and monitoring programs based on the principles of adaptive management assist managers to identify and reduce suchimpacts. The small mammal community is one important component ofa forest ecosystem that may be impacted by development projects. In 1996, a natural gas exploration project was initiated in a Peruvian rainforest. The Smithsonian Institution's Monitoring andAssessment of Biodiversity program cooperated with Shell Prospecting and Development Peru to establish an adaptive management program to protect the region's biodiversity. In thisarticle, we discuss the role of assessing and monitoring small mammals in relation to the natural gas project. We outline theconceptual issues involved in establishing an assessment andmonitoring program, including setting objectives, evaluating the results and making appropriate decisions. We also summarizethe steps taken to implement the small mammal assessment, provideresults from the assessment and discuss protocols to identifyappropriate species for monitoring.     

Homogeneity and stability study of the candidate reference material Adamussium colbecki for trace elements

The preparation of a new candidate certified reference material (CRM) for trace elements based on the antarctic bivalve Adamussium colbecki(IRMM 813) was carried out by the Istituto Superiore di Sanità(ISS, Rome, Italy) in cooperation with the Institute for Reference Materials and Measurements, Joint Research Centre of the European Commission (EC-JRC-IRMM), in the frame of the Italian National Programme of Research in Antarctica (Programma Nazionale di Ricerca in Antartide, PNRA). Samples were collected at Terra Nova Bay (Ross Sea) during the 2000-2001 expedition in Antarctica. The preparation of a material suitable for certification was performed by the EC-JRC-IRMM. Measurements for homogeneity and short-term stability tests were carried out by ISS. The elements selected for the certification project were As, Cd, Cu, Cr, Fe, Mn, Ni and Zn. For the above-mentioned tests, the determination of the elements of interest was performed on samples mineralised by microwave-assisted acid digestion. The analytical techniques employed to this end were inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma dynamic reaction cell quadrupole mass spectrometry (ICP-DRC-Q-MS). The candidate material was shown to be fit for purpose with regard to homogeneity and short-term stability, thus allowing the following phases of the certification project to be undertaken, in the first place the selection of expert laboratories for the accomplishment of the certification campaign.     

Chrysotile asbestos is progressively converted into a non-fibrous amorphous material by the chelating action of lichen metabolites

A natural deactivation of chrysotile asbestos occurs on serpentinite rocks where lichens selectively grow on the fibres and secrete metabolites, including oxalic acid, which, in the long term, turn the fibres into a non-toxic amorphous material.     

Technologies,challenges and perspectives of biogas production within an agricultural context. The case of China and Africa

Environment, Development and Sustainability - The use of fossil fuels in modern economies has been a success because of the low cost of fossil resources. However, the depletion of fossil reserves,...     

Five years of formaldehyde and acetaldehyde monitoring in the Rio de Janeiro downtown area – Brazil

The fuel matrix used in Brazil is unique around the world. The intensive use of hydrated ethanol, gasohol (gasoline with 25% v/v of ethanol), compressed natural gas (CNG), and biodiesel leads to a peculiar composition of the urban atmosphere. From 1998 to 2002 an increase in formaldehyde levels was observed and since then, a reduction. This work presents a monitoring campaign that was executed from March 2004 to February 2009 by sampling at early morning on every sunny Wednesday for a total of 183 samples. The results indicate a strong reduction in formaldehyde levels from 2004 (average of 135.8 μg m^?3 with SD 28.4 μg m^?3) to 2009 (average of 49.3 μg m^?3 with SD 27.4 μg m^?3). The levels of acetaldehyde showed a slight reduction from 2004 (average of 34.9 μg m^?3 with SD 8.0 μg m^?3) to 2009 (average of 26.8 μg m^?3 with SD 11.5 μg m^?3). Comparing the results with the concurrent evolution of the fleet and of fuel composition indicates that the observed formaldehyde levels could be associated with the increase in ethanol use and in CNG use by engines with improved technology over the first converted CNG engines. Modelling studies using the OZIPR trajectory model and the SAPRC chemical mechanism indicate that formaldehyde is the main ozone precursor in Rio de Janeiro and acetaldehyde is the forth one.     

Monitoring of sources and atmospheric processes controlling air quality in an urban Mediterranean environment

Different monitoring parameters (PM mass concentrations, number–size distribution, black carbon, gaseous pollutants, and chemical composition, among others) are currently used in air quality studies. Urban aerosols are the result of several sources and atmospheric processes, which suggests that a single monitoring technique is insufficient to quantitatively evaluate all of them.This study assesses the suitability of a number of monitoring techniques (PM mass concentrations, number and size distribution of ultra-fine particles, levels of gaseous pollutants, and a complete chemical characterization of PM₁₀ and PM_2.5) by examining the response of those techniques to the different emission sources and/or atmospheric processes affecting an urban Mediterranean area (Barcelona, NE Spain).The results of this work reveal that the PM mass, the number concentration and the chemical composition give different, but complementary, information. Whereas the mineral matter, a key atmospheric aerosol component across the Mediterranean, is not properly quantitatively assessed by measuring sub-micrometric particles, the monitoring of the number concentration is indispensable to interpret the origin of specific aerosol episodes. Furthermore, the chemical composition yields very relevant information to deduce the causes of specific pollution episodes.The number concentration of ultra-fine particles in urban areas is strongly dependent upon vehicle exhaust emissions, which may cause adverse health impacts. Moreover, urban Mediterranean environments are favourable to produce nucleation-mode particles (<20 nm) with photochemical origin. In those cases, these particles are expected to be of high solubility and consequently their toxicity may differ from that of traffic-generated ultra-fine particles. Thus, the use of a single monitoring parameter to evaluate the health effects seems to be not enough.     

Survey on fluoride, bromide and chloride contents in public drinking water supplies in Sicily (Italy)

Six hundred and sixty-seven water samples were collected from public drinking water supplies in Sicily and analysed for electric conductivity and for their Cl(-), Br(-) and F(-) contents. The samples were, as far as possible, collected evenly over the entire territory with an average sampling density of about one sample for every 7,600 inhabitants. The contents of Cl(-) and Br(-), ranging between 5.53 and 1,302 mg/l and between <0.025 and 4.76 mg/l respectively, correlated well with the electric conductivity, a parameter used as a proxy for water salinity. The highest values were found both along the NW and SE coasts, which we attributed to seawater contamination, and in the central part of Sicily, which we attributed to evaporitic rock dissolution. The fluoride concentrations ranged from 0.023 to 3.28 mg/l, while the highest values (only three exceeding the maximum admissible concentration of 1.5 mg/l) generally correlated either with the presence in the area of crystalline (volcanic or metamorphic) or evaporitic rocks or with contamination from hydrothermal activity. Apart from these limited cases of exceeding F(-) levels, the waters of public drinking water supplies in Sicily can be considered safe for human consumption for the analysed parameters. Some limited concern could arise from the intake of bromide-rich waters (about 3% exceeding 1 mg/l) because of the potential formation of dangerous disinfection by-products.