Contamination by organochlorine compounds in the edible tissue of four sturgeon species from the Caspian Sea (Iran)

This study focused on accumulation of organochlorine compounds (OCs), including dichloro-diphenyl-trichloroethanes (DDTs), hexachlorobenzene (HCB), hexachlorocyclohexanes (HCHs), and polychlorinated biphenyls (PCBs) accumulation in the muscle of four sturgeon (Persian sturgeon, Acipenser persicus; Stellate sturgeon, Acipenser stellatus; Ship sturgeon, Acipenser nudiventris and Beluga sturgeon, Huso huso) from the southern Caspian Sea. The DDT group was prominent in all of the sturgeon muscle tested constituting almost half or more of the total organochlorine content. Contaminant concentration generally followed this order: DDTs>PCBs>HCHs>HCB. The OCs concentrations in Beluga sturgeon (H. huso) were the highest and over four times higher than in the next highest species (A. nudiventris). From an ecotoxicological point of view, the concentrations of OCs in experimental fishes do not reflect a comparatively clean and pollution-free environment; however, results from this study shown that the inflow of organic pollutants into the Caspian Sea has been reduced when compared with prior studies. Levels of measured OCs in sturgeon were relatively low, but the level of some OCs in some of the specimens tested exceeded the guidelines for food; therefore, the maximum allowable daily consumption rate for sturgeon from this watershed may be limited by DDTs and PCBs content for high risk populations.     

Energy flow modeling and sensitivity analysis of inputs for canola production in Iran

This study examines energy use patterns and the relationship between energy inputs and yield for canola production in Golestan province of Iran. Data used in this study were obtained from 130 randomly selected canola farms using a face to face survey. The results revealed that total energy of 17,786.36 MJ ha⁻¹ was required for canola production and fertilizer, diesel fuel and electricity were the main energy consuming inputs. Energy use efficiency and energy productivity were 3.02 and 0.12 kg MJ⁻¹, respectively. Moreover, in specifying a functional relationship the Cobb-Douglas production function was applied and the results showed that machinery, fertilizer, diesel fuel and water for irrigation energies significantly contributed to yield. Also, the marginal physical productivity (MPP) technique was applied to analyze the sensitivity of energy inputs. It was found that, canola production had more sensitivity on machinery, fertilizer and water for irrigation energies; so that an additional use of 1 MJ from each of the machinery, total fertilizer and water for irrigation would lead to an increase in production by 0.93, 0.61 and 0.24 kg, respectively. However, electricity and seed energies were contributed negatively to yield, which may result in inverse effect on yield and impose risks to the environment.     

Evaluation of workers' exposure to methylene diphenyl diisocyanate (MDI) in an automobile manufacturing company, Iran.

Evaluation of personal inhalation exposure to methylene diphenyl diisocyanate (MDI) among 39 employees, working in the window fixation and window glue processes in an automobile manufacturing company was performed. This study was conducted for both case and control groups. After sampling and sample preparation processes, MDI was determined with a UV-VIS spectrophotometer at 590 nm; the lung function was assessed with a digital spirometer, too. The average concentration of MDI in the window fixation, and window glue workplaces were 34.53 and 27.37 micro g/m3, respectively, which was lower than the threshold limit value (TLV) recommended by the American Conference of Governmental Industrial Hygienists (ACGIH) (51 micro g/m3). Respiratory symptoms in the exposed group were significantly different compared to the unexposed group (p < .05). Lung capacities in the case group were lower than in the control group (p < .05). Therefore, MDI can be easily measured making it possible to evaluate the adverse effects caused by occupational exposure.     

Leaching characteristics of the fine fraction from an excavated landfill: physico-chemical characterization

Journal of Material Cycles and Waste Management - Leaching of fine fraction (&lt;10&nbsp;mm) obtained from landfill mining activities in an Estonian landfill was done. On-site excavation...     

Presence of heavy metals in drinking water resources of Iran: a systematic review and meta-analysis

Environmental Science and Pollution Research - Water quality is one of the most important indices for public health especially for drinking water consumptions. This study was conducted to survey...     

Propagation and extinction of dust flames in narrow channels

This article has investigated the propagation and extinction of aluminum dust cloud flame in a narrow channel. The burned and burning dust particles act as heat sources and the channel walls act as heat sinks. In this method, discrete heat source has been used to analyze dust combustion in a narrow channel. Using the superposition of sources and sinks, the preheat zone temperature is predicted as an indicator of flame propagation or extinction. Dust concentration and channel width are two major parameters which affect the quenching distance and flame propagating speed. Wall temperature affects the heat loss; and by preheating the walls, quenching distance is reduced and flame propagation speed is increased.     

Exposure to Methyl Methacrylate and Its Subjective Symptoms Among Dental Technicians,Tehran, Iran

Exposure to methyl methacrylate (MMA), total dust and health symptoms were investigated in 20 dental laboratories located in Tehran, Iran. Time-weighted average (TWA) of MMA and peak concentrations were determined, using XAD-2 tubes followed by GC-ID analysis. Total dusts were evaluated gravimetrically. Health symptoms were asked using a questionnaire. TWA for technicians with direct and indirect exposure to MMA were 327.28 ± 79.42 and 282.9 ± 41.84 mg/m³ , respectively. Peak concentration of MMA for those technicians were 337.0 ± 36.81 and 328.88 ± 45.40 mg/m³, respectively.

There were no significant differences between TWA of MMA and peak concentration in different weekly workdays; however, within-day variations were observed (P < .05).

TWA of MMA and peak concentration correlation with the laboratory volume were 0.61-0.65. Dust exposure of technicians was 2.35 ± 2.70 mg/m³. Cough and skin dryness were the common health symptoms. Smoking and asbestos exposure history were factors influencing cough prevalence (p < .05).

It is concluded that the current Short-Term Exposure Limit (STEL) is not low enough to protect technicians against the adverse effects caused by MMA.     

Inbreeding and the evolution of sociality in arthropods

Animals have evolved strategies to optimally balance costs and benefits of inbreeding. In social species, these adaptations can have a considerable impact on the structure, the organization, and the functioning of groups. Here, we consider how selection for inbreeding avoidance fashions the social behavior of arthropods, a phylum exhibiting an unparalleled richness of social lifestyles. We first examine life histories and parental investment patterns determining whether individuals should actively avoid or prefer inbreeding. Next, we illustrate the diversity of inbreeding avoidance mechanisms in arthropods, from the dispersal of individuals to the rejection of kin during mate choice and the production of unisexual broods by females. Then, we address the particular case of haplodiploid insects. Finally, we discuss how inbreeding may drive and shape the evolution of arthropods societies along two theoretical pathways.     

An equal sex ratio followed by differential sex mortality causes overestimation of females in gall midges: no evidence for sex ratio regulation

Monogeny, the production of unisexual broods by individual females, has been recognized for nearly 80?years. The genetic nature of gall midges' sex determination predicts an equal numbers of male-producing and female-producing females in the populations such that the overall sex ratio is expected to be nearly 1:1. However, observations of some strictly monogenous populations with biased sex ratio, mainly toward females, have raised the question of whether gall midges are able to adjust their offspring sex ratio in response to changes in environmental conditions, and some authors have even considered sex ratio regulation as a strong force in the course of the evolution of monogeny. In this paper, first, by studying the sex ratio variations of the predatory gall midge, Aphidoletes aphidimyza within a generation, we showed that adult males emerge up to 1?day earlier and have shorter life span than females (less than 4?days and up to 6?days, respectively). Although, the sex ratio of A. aphidimyza at the time of emergence was nearly 1:1 (52.41?% males), a simple population simulation indicated that the differential mortality of sexes can lead to a female-biased sex ratio estimation (57.88?% females) under random sampling in the natural environments. Our results imply that the primary sex ratio of monogenous gall midges is nearly 1:1 and that the arrhenogenic/thelygenic gall midges are not able to alter the number of their male/female progenies in response to changes in environmental conditions.     

Stand-alone PV-hydrogen energy system in Taleghan-Iran using HOMER software: optimization and techno-economic analysis

One of the most attractive features of hydrogen as an energy carrier is that it can be produced from water. Hydrogen has the highest energy content per unit mass as compared to chemical fuel and can be substituted. Its burning process is non-polluting, and it can be used in the fuel cells to produce both electricity and useful heat. Photovoltaic arrays can be used in supplying the water electrolysis systems by their energy requirements. During the daylight hours, the sunlight on the photovoltaic array converts into electrical energy which can be used for electrolyzer. The hydrogen produced by the electrolyzer is compressed and stored in hydrogen vessel and provides energy for the fuel cell to meet the load when the solar energy is insufficient. This study investigates a stand-alone power system that consists of PV array as power supply and electrolyzer. They have been integrated and worked at the Taleghan renewable energies’ site in Iran. The National Renewable Energy Laboratory’s Hybrid Optimization Model for Electric Renewables simulation software has been used to carry out the optimal design and techno-economic viability of the energy system. The simulation results demonstrate that energy system is composed of 10-kW PV array, 3.5-kW electrolyzer, 0.4-kW proton exchange membrane fuel cell, 2.5-kW inverter, and 60 batteries (100 Ah and 12 V). The total initial capital cost, net present cost, and cost of electricity produced from this energy system are 193,563 US$, 237,509 US$, and 3.35 US$/kWh, respectively.