Isotherm,kinetic, and thermodynamic studies for dynamic adsorption of toluene in gas phase onto porous Fe-MIL-101/OAC composite

Environmental Science and Pollution Research - In the present paper, micro-mesoporous Fe-MIL-101/OAC composite using in situ incorporation of Fe-MIL-101 into oxidized activated carbon was...     

Risk factors for being the at-fault driver: A case–control study

Objective: It is estimated that road traffic accidents are globally responsible for approximately 1.2 million deaths and 20 to 50 million injuries. About 70% of traffic incidences (TIs) occur in developing countries and among countries with high TI rates; Iran is the first. The aim of this study was to measure the association between being responsible for a traffic accident and some vehicle, human; and environmental related factors in Yasuj, a city with a high incidence of road traffic injuries and deaths in Iran.

Methods: This is a time-, date-, and place-matched case–control study conducted in 2015 using all traffic accidents registered and investigated by police during 2012. In total, 194 drivers were considered the at-fault driver in a traffic accident and the 194 drivers in the same collisions were included in the analysis.

Results: Based on the results from multivariate conditional logistic regression, significant associations between vehicle maneuver (OR_{Turn to right or left/Moving forward} = 11.10, 95% confidence interval [CI], 1.77–69.58, P = .01) and age (odds ratio [OR] = 1.11, 95% CI, 1.004–1.22, P = .04) and the chance of being an at-fault driver were found.

Conclusion: Driver behavior–related interventions including training and law enforcement seem to be more effective in reducing road traffic accidents in Iran.     

Parameter optimization of the fungicide (Vapam) sorption onto soil modified with clinoptilolite by Taguchi method

This study employs the Taguchi optimization methodology to optimize the effective parameters for the pesticide (Vapam) sorption onto soil modified with natural zeolite (clinoptilolite). The experimental factors and their ranges chosen for determination of the effective parameters were: initial Vapam concentration (0.4–1.6 mg/L), initial pH of the pesticide solution (2–12), the percentage of clinoptilolite in the modified soil (0–6 %), temperature (15–35°C) and shaking time (2–24 h). The orthogonal array (OA) L₁₆ and the bigger the better response category of the Taguchi method were selected to determine the optimum conditions: initial Vapam concentration (1.2 mg/L), initial pH of the pesticide solution (2), the percentage of clinoptilolite in the modified soil (4 %), temperature (15°C) and shaking time (2 h). The results showed that in comparison with other parameters, the initial Vapam concentration was the most effective one for the sorption of this pesticide onto soil, modified with clinoptilolite. Moreover, after determining the optimum levels of the sorption process parameters, confirmation experiments were performed to prove the effectiveness of the Taguchi's experimental design methodology.     

Exogenously applied calcium alleviates cadmium toxicity in Matricaria chamomilla L. plants

Cadmium (Cd) toxicity in plants leads to serious disturbances of physiological processes, such as inhibition of chlorophyll synthesis, oxidative injury to the plant cells and water and nutrient uptake. Response of Matricaria chamomilla L. to calcium chloride (CaCl₂) enrichment in growth medium for reducing Cd toxicity were studied in this study. Hydroponically cultured seedlings were treated with 0, 0.1, 1, and 5 mM CaCl₂, under 0, 120, and 180 μM CdCl₂ conditions, respectively. The study included measurements pertaining to physiological attributes such as growth parameters, Cd concentration and translocation, oxidative stress, and accumulation of phenolics. Addition of CaCl₂ to growth media decreased the Cd concentration, activity of antioxidant enzymes, and reactive oxygen species accumulation in the plants treated with different CdCl₂, but increased the growth parameters. Malondialdehyde and total phenolics in shoots and roots were not much affected when plants were treated only with different CaCl₂ levels, but it showed a rapid increase when the plants were exposed to 120 and 180 CdCl₂ levels. CaCl₂ amendment also ameliorated the CdCl₂-induced stress by reducing oxidative injury. The beneficial effects of CaCl₂ in ameliorating CdCl₂ toxicity can be attributed to the Ca-induced reduction of Cd concentration, by reducing the cell-surface negativity and competing for Cd²⁺ ion influx, activity enhancement of antioxidant enzymes, and biomass accumulation.     

Parameter optimization of the fungicide (Vapam) sorption onto soil modified with clinoptilolite by Taguchi method

This study employs the Taguchi optimization methodology to optimize the effective parameters for the pesticide (Vapam) sorption onto soil modified with natural zeolite (clinoptilolite). The experimental factors and their ranges chosen for determination of the effective parameters were: initial Vapam concentration (0.4-1.6 mg/L), initial pH of the pesticide solution (2-12), the percentage of clinoptilolite in the modified soil (0-6 %), temperature (15-35°C) and shaking time (2-24 h). The orthogonal array (OA) L(16) and the bigger the better response category of the Taguchi method were selected to determine the optimum conditions: initial Vapam concentration (1.2 mg/L), initial pH of the pesticide solution (2), the percentage of clinoptilolite in the modified soil (4 %), temperature (15°C) and shaking time (2 h). The results showed that in comparison with other parameters, the initial Vapam concentration was the most effective one for the sorption of this pesticide onto soil, modified with clinoptilolite. Moreover, after determining the optimum levels of the sorption process parameters, confirmation experiments were performed to prove the effectiveness of the Taguchi's experimental design methodology.     

Hydrogeochemistry and water quality assessment of the Kor–Sivand Basin, Fars province, Iran

In order to assess the quality and suitability of waters in the Kor-Sivand river basin, 60 water samples from the Kor river and 90 water samples from wells in the basin were studied. Assessments were based on Piper's and Gibbs' diagrams for water quality, Food and Agricultural Organization's (FAO) guidelines, and US Salinity Laboratory diagram for water suitability. The results showed that the river water is of Ca-HCO(3) type, while well water is of Ca-Cl and Na-Cl type. Based on Gibbs' diagram, the source of soluble ions in the river water samples is the weathering of stones over which water flows, while evaporation was found to be the dominant process in the ion concentration of the well samples. According to the FAO Guidelines, the salinity of surface water for irrigation did not cause great restrictions; however, many of these waters could create potential permeability problems. In the groundwater samples, a high salt concentration is more important than the infiltration problem. Mg hazard values at some sites limit its use for agricultural purposes. One third of the river water samples and two thirds of well waters had more than 50% magnesium. Saturation indices showed that 94% of the analyzed water samples are supersaturated with calcite, aragonite, and dolomite. Based on the US Salinity Laboratory diagram, river water samples were classified as C(2)S(1) and C(3)S(1), while C(4)S(3), C(4)S(4), C(2)S(1), and C(3)S(1) were the most dominant classes in well samples. Some management practices necessary for sustainable development of water resources in the study area were discussed briefly, including appropriate selection of crops, adequate drainage, leaching, blending and cyclic use of saline water, proper irrigation method, and addition of soil amendment.     

Tailoring a non-path-dependent model for environmental risk management and polycentric urban land-use planning

This study attempts to develop a non-path-dependent model for environmental risk management and polycentric urban land-use planning in Gorgan Township area, Iran. Applying three suitability layers of environmental risk (soil erosion, flood risk, fire risk, and land susceptibility), urbanization potential, and integrated surface (environmental risk plus urbanization potential layers), a non-path-dependent Cellular Automata-Markov Chain (CA-MC) model was configured to execute three scenarios of polycentric urban growth allocation. Specifically, the modeling approach improved the traditional functionality of the CA-MC model from a prediction algorithm into an innovative land allocation tool. Besides, due to its flexibility, the non-path-dependent model was able to explicitly include different characteristics of the landscape structure ranging from physical land attributes to landscape functions and processes (natural hazards). Accordingly, three polycentric urban growth allocation efforts were undertaken and compared in terms of connectivity and compactness of the resultant patterns and consumption of other land resources. Based on results, the polycentric allocation procedure based on integrated suitability layer produced a more manageable pattern of urban landscape, while the growth option based on environmental risk layer was more successful for protecting farmlands against excessive urbanization. This study suggests that polycentric urban land-use planning under the strategy of rural land development programs is an available option for designing an urban landscape with lower exposure to natural hazards and more economic benefits to rural residents. Finally, the non-path-dependent modeling is a recommended approach, when highly flexible and interactive decision-support systems as well as trend-breaking scenarios are desired.