Mercury accumulation in selected tissues of shrimp Penaeus merguiensis from Musa estuary,Persian Gulf: variations related to sex,size, and season

The levels of mercury in tissues of Penaeus merguiensis from Musa estuary, northwest of the Persian Gulf, were investigated. This study assessed the relationship between mercury levels in hepatopancrea, gill, and muscle with sex, size, and season. The order of mercury concentrations in tissues of the shrimp P. merguiensis was as follows: hepatopancreas > gill > muscle. There was a positive correlation between mercury concentrations in shrimp species with sex and size of its food items. We expected to see higher mercury levels in tissues of female species because they are larger and can eat larger food items. Also, there was a positive correlation between mercury concentrations in shrimp species with its food source. Therefore, female species feed more on shrimp and plant and are contaminated with high levels of mercury. There was significant difference (p?<?0.05) in mercury levels between different seasons; higher mercury levels were found in July (summer season).     

Heavy metal bioaccumulation and risk assessment for wild and farmed beluga sturgeon caviar

Because of over-exploitation of sturgeon for caviar production, they have been listed worldwide in annex II of the Convention on International Trade in Endangered Species regulations; so caviar production using aquaculture is increasingly seen as a feasible way to reduce overfishing. The accumulation of the nonessential metals As, Ba, Cd, Hg, Pb, and Sn was determined in the caviar of farmed and wild Beluga sturgeon (Huso huso). The levels of As in both and Cd in wild samples were less than 0.01 mg kg^?1 wet weight, and the comparison for all of the metals studied did not show large fluctuations in metal concentrations between farmed and wild caviar samples. The average for each toxic metal was below the permissible limits proposed by the UK’s Ministry of Agriculture, Fisheries and Foods (2000). The maximum allowable daily consumption rate of caviar was calculated; however, the health risks from caviar consumption are uncertain because the amount of caviar consumed by heavy users is not known.     

Indirect forced solar drying of banana slices: phenomenological explanation of non-isotropic shrinkage and color changes kinetics

Solar drying technology is a noteworthy technique as it uses the renewable solar energy. In this study, thin slices of banana were dried by using an indirect forced solar dryer at air mass flow rates of 0.016, 0.041, and 0.082 kg s^?1. In order to assess the kinetics of shrinkage and color changes, image processing technique was applied for determining area, volume, density, total color difference and browning index. Shrinkage factor of the samples was less than 1 during drying indicating non-isotropic shrinkage with contraction of inner voids. Furthermore, product shrinkage showed two descending drying steps in which the volume change was more than the evaporated water volume in the first step and equal to that in the second step. The dimensionless evaporated water volume with respect to the dimensionless volume difference of the product also revealed that two steps of volume change existed during drying separated at critical moisture ratio 0.23. The area and volume changes were only related to the product moisture content and were independent of the air mass flow rate, and hence air temperature. In contrary to the browning index, the total color difference was not influenced by air mass flow rate and the least change in browning index occurred at mass flow rate of 0.041 kg s^?1.     

Sugarcane Bagasse Paper Reinforced by Cellulose Nanofiber (CNF) and Bleached Softwood Kraft (BSWK) Pulp

This study explores the effects of bleached softwood kraft pulp (BSWK) as a conventional reinforcing material in comparison with cellulose nanofiber (CNF) as an emerging bionanomaterial on the bleached soda sugarcane bagasse (BSSB) paper furnish. Cationic polyacrylamide was selected as a retention aid along with the CNF addition to retain it on fiber surfaces during the papermaking process. The results showed that though the effects of CNF were similar to those of BSWK in the most of properties but there were some important differences which can industrially be noticeable. In one hand, both of cellulosic elements, when substituted for the BSSB at the 5 or 10 % levels, gave increases in the paper strength, i.e. samples containing 10 % CNF yielded similar tensile strength (53 N m/g) and a more consolidated structure (14 % increment of the density) than those produced with 10 % BSWK. CNF addition had opposite effects on the air-permeability of the resulting paper. Unlike BSKW, the addition of CNF had a strong favorable effect on tear strength, but it was markedly slowed the rate of drainage time when it was especially added at 10 % level of the final furnish.     

Source apportionment of PAHs and n-alkanes in respirable particles in Tehran,Iran by wind sector and vertical profile

The vertical concentration profiles and source contributions of polycyclic aromatic hydrocarbons (PAHs) and n-alkanes in respirable particle samples (PM₄) collected at 10, 100, 200 and 300-m altitude from the Milad Tower of Tehran, Iran during fall and winter were investigated. The average concentrations of total PAHs and total n-alkanes were 16.7 and 591 ng/m³, respectively. The positive matrix factorization (PMF) model was applied to the chemical composition and wind data to apportion the contributing sources. The five PAH source factors identified were: ‘diesel’ (56.3 % of total PAHs on average), ‘gasoline’ (15.5 %), ‘wood combustion, and incineration’ (13 %), ‘industry’ (9.2 %), and ‘road soil particle’ (6.0 %). The four n-alkane source factors identified were: ‘petrogenic’ (65 % of total n-alkanes on average), ‘mixture of petrogenic and biomass burning’ (15 %), ‘mixture of biogenic and fossil fuel’ (11.5 %), and ‘biogenic’ (8.5 %). Source contributions by wind sector were also estimated based on the wind sector factor loadings from PMF analysis. Directional dependence of sources was investigated using the conditional probability function (CPF) and directional relative strength (DRS) methods. The calm wind period was found to contribute to 4.4 % of total PAHs and 5.0 % of total n-alkanes on average. Highest average concentrations of PAHs and n-alkanes were found in the 10 and 100 m samples, reflecting the importance of contributions from local sources. Higher average concentrations in the 300 m samples compared to those in the 200 m samples may indicate contributions from long-range transport. The vertical profiles of source factors indicate the gasoline and road soil particle-associated PAHs, and the mixture from biogenic and fossil fuel source-associated n-alkanes were mostly from local emissions. The smaller average contribution of diesel-associated PAHs in the lower altitude samples also indicates that the restriction of diesel-fueled vehicle use in the central area of Tehran has been effective in reducing the PAHs concentration.     

A Box-Behnken design for determining the optimum experimental condition of the fungicide (Vapam) sorption onto soil modified with perlite

In the present study, response surface methodology (RSM) based on the Box-Behnken design (BBD) was employed to investigate the effects of the different operating conditions on the removal of the fungicide (Vapam) onto soil modified with perlite using sorption process. The process parameters such as pH of the fungicide solution (2, 5 and 8), temperature (15, 25 and 35°C), shaking time (2, 13 and 24 h) and the percentage of perlite in the modified soil (0, 2 and 4 %) were investigated using a four-factor-three-level Box-Behnken design at an initial fungicide concentration of C₀ = 1.6 mg/L as a fixed input parameter. A second-order quadratic model suggested the optimum conditions to be as follows: fungicide solution pH of 3.57, temperature of 15°C, shaking time of 3.5 h and 4% of perlite in the modified soil which resulted in the improvement of Vapam sorption. Under optimum conditions, the fungicide (Vapam) removal was predicted 12.88 μg/g by BBD. The confirmatory experiments were conducted and the results revealed that the fungicide removal was 13.14 μg/g which indicated that the predicted and the observed values of response (Vapam removal) were in close agreement. Therefore, the soil modified with perlite holds good potential for Vapam sorption. This is the first report on fungicide Vapam sorption onto soil modified with perlite using statistical experimental design employing response surface methodology.     

Variations in breeding success and daily nest survival of Whiskered Tern (<Emphasis Type="Italic">Chlidonias hybrida</Emphasis>) at two Iranian colonies

Variations in breeding success of the Whiskered Terns (Chlidonias hybrida) were studied in two wetlands; Anzali (2005 and 2008) and Zarivar (2007–2008) in north and west Iran. Nesting success was modeled and compared using information-theoretic approach implemented in program Mark in order to assess effects of colony locations, years and nest initiation dates on the probability of daily nest survival. Clutch size did not vary between colonies and years. Breeding success varied between colonies (Zarivar > Anzali), and years only in Anzali (2005 > 2008). Overall daily nest survival was 0.977. (95% LCI 0.973, UCI 0.981), equivalent to a Mayfield nest survival of 0.317. (95% LCI 0.255, UCI 0.387). Egg-laying periods and colony site were important covariates affecting the daily survival rates (Σω _i = 0.86 and Σω _i = 0.83, respectively), while, the support for the effect of year was less (Σω _i = 0.41). We concluded that Lake Zarivar provides a more favorable nesting location for Whiskered Terns probably because of little changes in rainfall and water depth during the breeding seasons which influence breeding performance.     

Sample preparation followed by high performance liquid chromatographic (HPLC) analysis for monitoring muconic acid as a biomarker of occupational exposure to benzene.

Factors affecting solid phase extraction (SPE) of trans,trans-muconic acid (ttMA), as a benzene biomarker, including sample pH, sample concentration, sample volume, sample flow rate, washing solvent, elution solvent, and type of sorbent were evaluated. Extracted samples were determined by HPLC-UV (high performance liquid chromatography-ultraviolet). The analytical column was C18, UV wave length was 259 nm, and the mobile phase was H(2)O/methanol/acetic acid run at flow rate of 1 ml/min. A strong anion exchange silica cartridge was found successful in simplifying SPE. There was a significant difference between recoveries of ttMA when different factors were used (p < .001). An optimum recovery was obtained when sample pH was adjusted at 7. There was no significant difference when different sample concentrations were used (p > .05). The optimized method was then validated with 3 different pools of samples showing good reproducibility over 6 consecutive days and 6 within-day experiments.