Uptake and distribution of phenanthrene and pyrene in roots and shoots of maize (Zea mays L.)

Polycyclic aromatic hydrocarbons as byproducts of carbon-based fuel combustion are an important group of pollutants with wide distribution in the environment. Polycyclic aromatic hydrocarbons are known as toxic compounds for almost all organisms. Different plant species can uptake polycyclic aromatic hydrocarbons by roots and translocate them to various aerial parts. The aim of this study is to investigate the uptake, translocation, and accumulation of pyrene and phenanthrene in maize under controlled conditions. Seeds were cultivated in perlite containing 25, 50, 75, and 100 ppm of phenanthrene and pyrene, and their concentrations in the roots and shoots of the plants were measured using high-performance liquid chromatography technique after 7, 14, and 21 days. The results revealed that phenanthrene naturally existed in maize and its concentration showed a time-dependent decrease in shoots and roots. In contrast, the concentration of pyrene was increased in the roots and reduced in the shoots. Although pyrene had higher uptake than phenanthrene in roots of maize, the translocation factor value for pyrene was lower than for phenanthrene. According to these findings, phenanthrene could be metabolized in maize in the shoot and root tissues, but pyrene had more tendency to be accumulated in roots.

     

Sample Preparation Followed by High Performance Liquid Chromatographic (HPLC) Analysis for Monitoring Muconic Acid as a Biomarker of Occupational Exposure to Benzene

Factors affecting solid phase extraction (SPE) of trans,trans-muconic acid (ttMA), as a benzene biomarker, including sample pH, sample concentration, sample volume, sample flow rate, washing solvent, elution solvent, and type of sorbent were evaluated. Extracted samples were determined by HPLC-UV(highperformance liquid chromatography-ultraviolet). The analytical column was C18, UV wave length was 259 nm, and the mobile phase was H2O/methanol/acetic acid run at flow rate of 1 ml/min. A strong anion exchange silica cartridge was found successful in simplifying SPE. There was a significant difference between recoveries of ttMA when different factors were used (p < .001). An optimum recovery was obtained when sample pH was adjusted at 7. There was no significant difference when different sample concentrations were used (p > .05). The optimized method was then validated with 3 different pools of samples showing good reproducibility over 6 consecutive days and 6 within-day experiments.     

Radiation heat transfer in transient dust cloud flame propagation

This study investigates the impact of radiation heat transfer and heat conduction on dust cloud combustion. Radiation plays a very important role in the stability of dust cloud flame, and increasing the amount of radiation drastically raises the possibility of instability and explosion in a dust cloud mixture. Flame speed, which is a function of mixture characteristics, can exhibit a fluctuating behavior. By using the discrete heat source method, it would be possible to study the transient propagation of dust flames. Thus, the propagation speed of flame can be obtained, and as time goes by, the transient speed of dust flame will reach its steady state value. By considering the radiation effect, better agreement is observed between the obtained results and experimental data.     

Release behavior of metals from tin-lined copper cookware into food simulants during cooking and cold storage

Environmental Science and Pollution Research - The copper pots with an inner coating layer of tin have been remarkably used in many countries for a long time. In this study, leaching of some metals...     

A detailed kinetic investigation on the effects of hydrogen enrichment on the performance of gas-fueled SI engine

This study investigates the effects of hydrogen enrichment on formation of pollutants and greenhouse gases in gas-fueled spark ignition engines. To this end, a previously validated detailed mechanism is embedded with a comprehensive one-dimensional engine model and the results are verified with experimental observations at different compression ratios and engine loads. The simulations are then performed for different mixtures of hydrogen and natural gas. The results indicate that adding hydrogen increases the cylinder peak pressure at different loads and compression ratios, despite the fact that reduces the amount of carbon monoxide, carbon dioxide, and methane in all the conditions.     

Geochemical characterisation of pyrite oxidation and environmental problems related to release and transport of metals from a coal washing low-grade waste dump, Shahrood, northeast Iran

Pyrite oxidation and release of the oxidation products from a low-grade coal waste dump to stream, groundwater and soil was investigated by geochemical and hydrogeochemical techniques at Alborz Sharghi coal washing plant, Shahrood, northeast Iran. Hydrogeochemical analysis of water samples indicates that the metal concentrations in the stream waters were low. Moreover, the pH of the water showed no considerable change. The analysis of the stream water samples shows that except the physical changes, pyrite oxidation process within the coal washing waste dump has not affected the quality of the stream water. Water type was determined to be calcium sulphate. The results of the analysis of groundwater samples indicate that the pH varies from 7.41 to 7.51. The concentrations of the toxic metals were low. The concentration of SO4 is slightly above than its standard concentration in potable water. It seems that the groundwater less affected by the coal washing operation in the study area. Geochemical analysis of the sediment samples shows that Fe concentration decreases gradually downstream the waste dump with pH rising. SO(4) decreases rapidly downstream direction. Copper, Zn and Co concentrations decrease with distance from the waste dump due to a dilution effect by the mixing of uncontaminated sediments. These elements, in particular, Zn are considerably elevated in sediment sample collected at the nearest distance to the waste dump. There is no doubt that such investigations can help to develop an appropriate water remediation plan.     

Fabrication of a pH-Responsive Magnetic Nanocarrier Based on Carboxymethyl Cellulose-Aminated Graphene Oxide for Loading and In-Vitro Release of Curcumin

Journal of Polymers and the Environment - In this study, a pH-responsive magnetic drug delivery system was prepared by&nbsp;cross-linking of Cofe2O4/graphene oxide to carboxymethyl cellulose...     

Tetracycline removal enhancement with Fe-saturated nanoporous montmorillonite in a tripartite adsorption/desorption/photo-Fenton degradation process

The adsorption and photo-Fenton degradation of tetracycline (TC) over Fe-saturated nanoporous montmorillonite was analyzed. The synthesized samples were characterized using XRD, FTIR, SEM, and XRF analysis, and the adsorption and desorption of TC onto these samples, as well as the antimicrobial activity of TC during these processes, were analyzed at different pH. Initially, a set of adsorption/desorption experiments was conducted, and surprisingly, up to 50% of TC adsorbed was released from Mt structure. Moreover, the desorbed TC had strong antibacterial activity. Then, an acid treatment (for the creation of nanoporous layers) and Fe saturation of the montmorillonite were applied to improve its adsorption and photocatalytic degradation properties over TC. Surprisingly, the desorption of TC from modified montmorillonite was still high up to 40% of adsorbed TC. However, simultaneous adsorption and photodegradation of TC were detected and almost no antimicrobial activity was detected after 180 min of visible light irradiation, which could be due to the photo-Fenton degradation of TC on the modified montmorillonite surface. In the porous structures of modified montmorillonite high, ˙OH radicals were created in the photo-Fenton reaction and were measured using the Coumarin technique. The ˙OH radicals help the degradation of TC as proposed in an oxidation process. Surprisingly, more than 90% of antimicrobial activity of the TC decreased under visible light (after 180 min) when desorbed from nanoporous Fe-saturated montmorillonite compared to natural montmorillonite. To the best of our knowledge, this is the first time that such a high TC desorption rate from an adsorbent with the least residual antimicrobial activity is reported which makes nanoporous Fe-saturated montmorillonite a perfect separation substance of TC from the environment.

     

Modified dehydrogenase enzyme assay for evaluation of the influence of Hg,Cd, and Zn on the bacterial community structure of a wastewater treatment plant

In this study, a traditional assay was modified to evaluate the effect of Hg, Cd, and Zn on the bacterial community of a sequencing batch reactor and activated sludge plants and heavy metal-resistant bacterial species were determined. After the isolation of metal-resistant bacteria, their 16S rRNA gene fragments were sequenced. The BLAST program was used to compare the resulting 16S rRNA sequences with those in GenBank database to identify the isolated bacterial species. Hg was found to be the most toxic metal for both bacterial communities investigated. Sequence batch reactor bacteria were comparatively more resistant to Hg, Cd, and Zn than those from activated sludge. The resistant strains were close to the members of genus Pseudomonas, Kocuria, Stenotrophomonas, Enterococcus, and Staphylococcus. The modified dehydrogenase enzyme assay seems to be simple, robust, and competent for evaluation of the impact of metals on bacterial activity. Sequencing batch reactor systems should be preferred over activated sludge when wastewaters containing hazardous metals are to be treated.