Adsorptive amputation of hazardous azo dye Congo red from wastewater: a critical review

Increasing amount of dyes in an ecosystem has propelled the search of various methods for dye removal. Amongst all the methods, adsorption occupies a prominent place in dye removal. Keeping this in mind, many adsorbents used for the removal of hazardous anionic azo dye Congo red (CR) from aqueous medium were reviewed by the authors. The main objectives behind this review article are to assemble the information on scattered adsorbents and enlighten the wide range of potentially effective adsorbents for CR removal. Thus, CR sorption by various adsorbents such as activated carbon, non-conventional low-cost materials, nanomaterials, composites and nanocomposites are surveyed and critically reviewed as well as their sorption capacities are also compared. This review also explores the grey areas of the adsorption performance of various adsorbents with reference to the effects of pH, contact time, initial dye concentration and adsorbent dosage. The equilibrium adsorption isotherm, kinetic and thermodynamic data of different adsorbents used for CR removal were also analysed. It is evident from a literature survey of more than 290 published papers that nanoparticle and nanocomposite adsorbents have demonstrated outstanding adsorption capabilities for CR.

Open image in new window

Graphical abstract ?

     

A context-intensive approach to imputation of missing values in data sets from networks of environmental monitors

Although networks of environmental monitors are constantly improving through advances in technology and management, instances of missing data still occur. Many methods of imputing values for missing data are available, but they are often difficult to use or produce unsatisfactory results. I-Bot (short for “Imputation Robot”) is a context-intensive approach to the imputation of missing data in data sets from networks of environmental monitors. I-Bot is easy to use and routinely produces imputed values that are highly reliable. I-Bot is described and demonstrated using more than 10 years of California data for daily maximum 8-hr ozone, 24-hr PM_2.5 (particulate matter with an aerodynamic diameter <2.5 μm), mid-day average surface temperature, and mid-day average wind speed. I-Bot performance is evaluated by imputing values for observed data as if they were missing, and then comparing the imputed values with the observed values. In many cases, I-Bot is able to impute values for long periods with missing data, such as a week, a month, a year, or even longer. Qualitative visual methods and standard quantitative metrics demonstrate the effectiveness of the I-Bot methodology.Implications: Many resources are expended every year to analyze and interpret data sets from networks of environmental monitors. A large fraction of those resources is used to cope with difficulties due to the presence of missing data. The I-Bot method of imputing values for such missing data may help convert incomplete data sets into virtually complete data sets that facilitate the analysis and reliable interpretation of vital environmental data.     

Household preferences and willingness to pay (WTP) for freshwater quality improvement in Pakistan’s Swat River Valley

This two-part study investigates household preferences and willingness to pay (WTP) for water quality improvement of the Swat River in Pakistan. First, a four-point Likert scale was used to rank preferences for water quality benefits without using any financial metric. Results show that households have comparatively strong preferences for non-use benefits. Second, a contingent valuation question was designed to determine WTP for adopting a management plan developed exclusively for water quality improvement in the Swat River. The estimated annual mean WTP per household for water quality improvement is $2.40 when donating to an NGO. Generalizing this value to households living in Swat Valley would generate up to $544,000 per year. The present value aggregate benefit for 15 years would be sufficient to cover the present value of aggregate costs to adopt the management plan. A mandatory program that would require paying for the management plan generates half the WTP compared to the voluntary plan, but is still sufficient to cover costs and may be more feasible than a voluntary program because payment is assured.     

Flow injection spectrophotometric determination of methamidophos using online hydrolysis

A new protocol for the online spectrophotometric determination of methamidophos has been developed. The method is based on online hydrolysis of methamidophos, and the resulting hydrolyzed product is reacted with sodium nitroproside to form a colored complex. The calibration curve is linear over the concentration range of 0.5–20 μgml^?–?1, with a molar absorptivity of 2.5×10⁴ L mol^?1 cm^?1. The method is fast and reproducible with a sample throughput of 90 samples/h. The method is successfully applied to formulations and real samples.     

Determination of ametryn in sugarcane and ametryn–atrazine herbicide formulations using spectrophotometric method

A sensitive spectrophotometric method has been developed for determination of ametryn in agricultural samples. The proposed method was based on reaction with pyridine and further coupling with sulfanilic acid to form a colored product. The absorbance was measured at 400 nm with a molar absorptivity of 2.1 × 10⁵ L mol⁻¹ cm⁻¹. The method shows a linear range from 0.2–20 μg mL⁻¹ with limit of detection and limit of quantification 0.16 and 0.54 μg mL⁻¹, respectively. The method has been successfully applied to the determination of ametryn in sugarcane juice and commercial formulations after separation of ametryn from triazine herbicides based on solvent extraction. Recovery values were found to be in the range of 96.0 ± 0.2% to 98.4 ± 0.1%.     

Statistical apportionment and risk assessment of selected metals in sediments from Rawal Lake (Pakistan)

The present study was carried out in order to evaluate the statistical apportionment and risk assessment of selected metals (Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Pb, Sr, and Zn) in freshly deposited sediments in Rawal Lake, Pakistan. Composite sediment samples were collected, oven-dried, grounded, homogenized, and processed to assess the water-soluble and acid extractable concentrations of the metals in the water extract and acid extract of the sediments using flame atomic absorption spectrophotometer. Statistical methods were used to identify the possible sources of the metals. Sediment quality guidelines and potential acute toxicity were used to evaluate the ecotoxicological sense of selected metals. Non-carcinogenic health risk assessment was also carried out to determine the potential adverse health risks to the inhabitants. Relatively higher concentration was noted for Ca, Fe, Mg, Na, K, Mn, and Sr in the sediment samples. Principal component analysis and cluster analysis revealed anthropogenic contributions of Cd, Pb, Cr, Mn, Fe, and Li in the sediments. Enrichment factors of the metals in sediments showed severe to moderate enrichment of Cd, Pb, Ca, Fe, Li, Mn, and Sr. Geoaccumulation indices and contamination factors evidenced significant contamination by Cd and Pb, although, on the whole, low degree of contamination was noted. The levels of some metals exceeded the sediment quality guidelines, which revealed frequently adverse biological effects to the dwelling biota in the aquatic ecosystem. The sediments were found to be significantly contaminated by Cd, Pb, Cr, Mn, Fe, and Li.     

Mean Vehicle Speed Distributions for the Spatiotemporal Estimation of Exhaust Emissions

Link Emissions Models estimate traffic-related air pollution emissions at the individual road link level and inform governmental policies for air quality management. The current South Australian Link Emissions Model (CLEM) assumes constant spatiotemporal traffic flow at a single fixed mean speed, a potential limitation as the variability of exhaust emissions with vehicle speed has been established in the literature.We extend CLEM to eliminate the assumption of constant traffic flow, through the derivation of mean Australian vehicle speed distributions for different road types. Specifically, we successfully model the vehicle speed profile data from the second National In-Service Emissions study using Nearest Neighbour Kernel Density Estimation. We propose a mean speed Distribution Link Emissions Model (DLEM) for exhaust emission estimation based on the derived mean speed distributions. DLEM is an augmented, enhanced version of CLEM, accommodating a range of vehicle speeds and road types. The performance of the extended model, DLEM, is analysed in comparison to the current model, CLEM, through a case study analysis of vehicle exhaust emissions on a typical arterial road in Adelaide, South Australia. Results indicate use of DLEM and, by extension, mean vehicle speed distributions, has a strong impact on emission estimation. In particular, the fixed speed model, CLEM, may be substantially underestimating exhaust emissions of carbon monoxide, non-methane volatile organic compounds and particulate matter less than 2.5 μm in diameter. These are common exhaust pollutants that have been extensively linked with adverse health effects including respiratory morbidity and premature mortality.     

Cooperative Game Among Cities in Urban Agglomerations and Economical Sustainable Development

This paper analyses redounded profits of cooperation and non-cooperation among cities in urban agglomerations based on game theory. It discusses the problems of economical development among cities with feeble cooperation, and deduces the conclusion that only cooperation of cities produces the maximum profits and realizes Pareto efficiency for cities and urban agglomerations. The paper states that cooperation is the cornerstone of economic sustainable development in urban agglomerations in profits produced by cooperation among cities. Some suggestions to accelerate cooperation among cities are proposed.     

Gamma irradiation of municipal sludge for safe disposal and agricultural use.

Gamma radiation was found to be an effective tool for hygienization of municipal wastewater sludge. The sludge received from the primary settling tank of a municipal wastewater treatment plant was gamma irradiated using a cobalt-60 source in a sludge hygienization research irradiator. The process parameters were adjusted to effectively eliminate coliform bacteria in the sludge and to prevent their regrowth. Irradiated sludge was found to be free of fecal coliform and could be directly disposed after drying in a landfill or used as manure. It could also be used as a medium for growth of Rhizobium sp for obtaining a bio-fertilizer.