Nitrate contamination in water resources,human health risks and its remediation through adsorption: a focused review

The level of nitrate in water has been increasing considerably all around the world due to vast application of inorganic nitrogen fertiliser and animal manure. Because of nitrate’s high solubility in water, human beings are getting exposed to it mainly through various routes including water, food etc. Various regulations have been set for nitrate (45–50 mgNO₃^?/L) in drinking water to protect health of the infants from the methemoglobinemia, birth defects, thyroid disease, risk of specific cancers, i.e. colorectal, breast and bladder cancer caused due to nitrate poisoning. Different methods like ion exchange, adsorption, biological denitrification etc. have the ability to eliminate the nitrate from the aqueous medium. However, adsorption process got preference over the other approaches because of its simple design and satisfactory results especially with surface modified adsorbents or with mineral-based adsorbents. Different types of adsorbents have been used for this purpose; however, adsorbents derived from the biomass wastes have great adsorption capacities for nitrate such as tea waste-based adsorbents (136.43 mg/g), carbon nanotube (142.86 mg/g), chitosan beads (104 mg/g) and cetyltrimethylammonium bromide modified rice husk (278 mg/g). Therefore, a thorough literature survey has been carried out to formulate this review paper to understand various sources of nitrate pollution, route of exposure to the human beings, ill effects along with discussing the key developments as well as the new advancements reported in procuring low-cost efficient adsorbents for water purification.

     

Survey of polyfluorinated chemicals (PFCs) in the atmosphere over the northeast Atlantic Ocean

High volume air sampling in Bermuda, Sable Island (Nova Scotia) and along a cruise track from the Gulf of Mexico to northeast coast of the USA, was carried out to assess air concentrations, particle-gas partitioning and transport of polyfluorinated chemicals (PFCs) in this region. Samples were collected in the summer of 2007. Targeted compounds included the neutral PFCs: fluorotelomer alcohols (FTOHs), perfluoroalkyl sulfonamides (FOSAs) and perfluoroalkyl sulfonamido ethanols (FOSEs).Among the FTOHs, 8:2 FTOH was dominant in all samples. Sum of the concentration of FTOHs (gas+particle phase) were higher in Bermuda (mean, 34 pg m^?3) compared to Sable Island (mean, 16 pg m^?3). In cruise samples, sum of FTOHs were highly variable (mean, 81 pg m^?3) reflecting contributions from land-based sources in the northeast USA with concentrations reaching as high as 156 pg m^?3.Among the FOSAs and FOSEs, MeFOSE was dominant in all samples. In Bermuda, levels of MeFOSE were exceptionally high (mean, 62 pg m^?3), exceeding the FTOHs. Sable Island samples also exhibited the dominance of MeFOSE but at a lower concentration (mean, 15 pg m^?3). MeFOSE air concentrations (pg m^?3) in cruise samples ranged from 1.6 to 73 and were not linked to land-based sources. In fact high concentrations of MeFOSE observed in Bermuda were associated with air masses that originated over the Atlantic Ocean.The partitioning to particles for 8:2 FTOH, 10:2 FTOH, MeFOSE and EtFOSE ranged from as high as 15 to 42% for cruise samples to 0.9 to 14% in Bermuda. This study provides key information for validating and developing partitioning and transport models for the PFCs.     

Familial congenital diaphragmatic hernia: Prenatal diagnosis,management, and outcome

Congenital diaphragmatic hernia (CDH) is a developmental defect of as yet unknown aetiology which accounts for 8 per cent of all major congenital anomalies and is associated with up to 80 per cent mortality despite optimal postnatal treatment. The risk of recurrence of CDH for future sibs after one affected infant is about 2 per cent. A multifactorial/threshold inheritance pattern with an observed high male:female sex ratio is currently favoured for the rare occurrence of familial CDH, although other modes of inheritance have also been described. We report three cases of familial CDH, two of whom were brother and sister sibs and the third was a first cousin, born within 18 months of each other. The diagnosis was by ultrasound and there were several factors predicting a poor outcome. The mortality in this group was 100 per cent. The prenatal diagnosis, treatment options, the unusual genetic aspects, outcome, and the pathology involved are discussed.     

Preparation and Properties of Biodegradable Foams

Foam extrusion of biodegradable polyester [poly(butylene adipate-co-terephthalate) (PBAT)] and its blends with maleated thermoplastic starch (MTPS) using a chemical blowing agent was performed. The effect of MTPS and percentage of chemical blowing agent on various foam properties is discussed. In general, an increased amount of PBAT in the foams improves the properties of the foams. The foam samples were characterized by measurements of density, expansion ratio, specific length, compressive strength, resiliency, moisture sorption, and imaging using digital light microscopy. Density, expansion ratio, and specific length measurements show that the best characteristics of lowest density, highest expansion ratio, and highest specific length are exhibited by the PBAT samples. The compressive strength and foam density exhibit a power-law relationship. Greater amounts of PBAT in the samples increase the resiliency and decrease the steady state weight gain during moisture sorption. All samples show regions of unfoamed material when only 3% chemical blowing agent is used, but when 5 and 7% chemical blowing agent is used, the samples exhibit cells throughout the matrix.     

Adaptation potential of ecosystem-based management to climate change in the eastern Canadian boreal forest

Ecosystem-based management (EBM) of forests is gaining acceptance for its focus on the maintenance of the long-term integrity of ecosystem processes, but climate change challenges this view because of its impacts on these very processes. We have therefore evaluated the robustness of EBM to projected climate change, considering the role of climate on forest growth and fire regime in a boreal forest of eastern Canada. A climate sensitive growth index model was calibrated for three commercial species and used to project the evolution of merchantable volume for two climate scenarios (B1 and A2) under conventional and EBM strategies. Current burn rate and burn rates under future climate scenarios were also considered. Under the most extreme projected climate scenario, the periodic timber supply could be reduced by up to 79% through direct (growth reduction) and indirect (fire) effects. However, ecological indicators show that EBM is a more robust forest management strategy than conventional one demonstrating its adaptation potential to climate change at least in the short term.     

Butyltins in the sediments of Kochi and Mumbai harbours, west coast of India

Surface sediment samples were collected from various locations in the Mumbai and Kochi harbours, west coast of India, to assess the presence of butyltin compounds. Tributyltin (TBT) and dibutyltin (DBT) varied from 16 to 16,816 ng/g dry wt. and from undetected to 469 ng/g dry wt., respectively, of the sediment in Kochi harbour. In Mumbai harbour, the values of TBT and DBT ranged between 4.5 and 1193 ng/g dry wt. and from undetected to 131 ng/g dry wt. of the sediments, respectively. The concentrations of both TBT and DBT showed strong seasonal variation probably due to the effect of tides and currents. Nevertheless, the levels of butyltin compounds were generally higher at sites influenced by shipping activities such as navigation, dry dock and ship-building activities. The presence of DBT indicates the abiotic or microbiological degradation of TBT. Compared to TBT, DBT was relatively less abundant, suggesting either fresh inputs of TBT and/or less degradation of TBT. The concentrations of TBT showed significant positive relationships with organic carbon and lipid, implying that both lipophilic and ionic interactions were probably involved in controlling the abundance of TBT at these sediments. The observed levels of butyltin compounds are much higher than those required to induce toxic effects on marine organisms, suggesting that these sediments were contaminated with butyltin compounds.     

Site security for chemical process industries

Chemical process industries such as oil refineries, fertiliser plants, petrochemical plants, etc., which handle hazardous chemicals, are potential targets for deliberate actions by terrorists, criminals and disgruntled employees. Security risks arising out of these threats are real and must be assessed to determine whether the security measures employed within the facility are adequate or need enhancement. The essential steps involved are threat analysis, vulnerability analysis, security countermeasures, and emergency response. Threat analysis involves the study of identifying sources, types of threats, and their likelihood. Vulnerability analysis identifies the weaknesses in a system that adversaries can exploit. Depending on the threat likelihood and vulnerabilities, various security countermeasures are suggested to improve the plant security. Appropriate emergency response measures that could mitigate the consequences of a successful attack and concepts of inherently safer processes in the light of process security are also discussed in the paper. It is recognised that serious terrorist threats exist to the transport system of hazardous chemicals (by road, rail cars, ships, pipelines, etc.). However, that is not a part of this study, which concentrates on process plants and hazardous materials within immovable boundaries. A case study of a fertiliser plant is used to show the application of ideas presented.     

Comparison of a plant based natural surfactant with SDS for washing of As(Ⅴ) from Fe rich soil

This study explores the possible application of a biodegradable plant based surfactant, obtained from Sapindus mukorossi, for washing low levels of arsenic （As） from an iron （Fe） rich soil. Natural association of As（Ⅴ） with Fe（Ⅲ） makes the process difficult. Soapnut solution was compared to anionic surfactant sodium dodecyl sulfate （SDS） in down-flow and a newly introduced suction mode for soil column washing. It was observed that soapnut attained up to 86% efficiency with respect to SDS in removing As. Full factorial design of experiment revealed a very good fit of data. The suction mode generated up to 83 kPa pressure inside column whilst down-flow mode generated a much higher pressure of 214 kPa, thus making the suction mode more efficient. Micellar solubilisation was found to be responsible for As desorption from the soil and it followed 1st order kinetics. Desorption rate coefficient of suction mode was found to be in the range of 0.005 to 0.01, much higher than down-flow mode values. Analysis of the PT-IR data suggested that the soapnut solution did not interact chemically with As, offering an option for reusing the surfactant. Soapnut can be considered as a soil washing agent for removing As even from soil with high Fe content.     

Roadmap to sustainable carbon-neutral energy and environment: can we cross the barrier of biomass productivity?

Environmental Science and Pollution Research - The total number of inhabitants on the Earth is estimated to cross a record number of 9 × 103 million by 2050 that present a unique challenge to...