Comparing dark- and photo-Fenton-like degradation of emerging pollutant over photo-switchable Bi2WO6/CuFe2O4: Investigation on dominant reactive oxidation species

The extensive use of tetracycline hydrochloride (TCH) poses a threat to human health and the aquatic environment. Here, magnetic p-n Bi₂WO₆/CuFe₂O₄ catalyst was fabricated to efficiently remove TCH. The obtained Bi₂WO₆/CuFe₂O₄ exhibited 92.1% TCH degradation efficiency and 50.7% and 35.1% mineralization performance for TCH and raw secondary effluent from a wastewater treatment plant in a photo-Fenton-like system, respectively. The remarkable performance was attributed to the fact that photogenerated electrons accelerated the Fe(III)/Fe(II) and Cu(II)/Cu(I) conversion for the Fenton-like reaction between Fe(II)/Cu(I) and H₂O₂, thereby generating abundant ?OH for pollutant oxidation. Various environmental factors including H₂O₂ concentration, initial pH, catalyst dosage, TCH concentration and inorganic ions were explored. The reactive oxidation species (ROS) quenching results and electron spin resonance (ESR) spectra confirmed that ?O₂^? and ?OH were responsible for the dark and photo-Fenton-like systems, respectively. The degradation mechanisms and pathways of TCH were proposed, and the toxicity of products was evaluated. This work contributes a highly efficient and environmentally friendly catalyst and provides a clear mechanistic explanation for the removal of antibiotic pollutants in environmental remediation.     

Comprehensive and high-resolution emission inventory of atmospheric pollutants for the northernmost cities agglomeration of Harbin-Changchun, China: Implications for local atmospheric environment management

Using a bottom-up estimation method, a comprehensive, high-resolution emission inventory of gaseous and particulate atmospheric pollutants for multiple anthropogenic sectors with typical local sources has been developed for the Harbin-Changchun city agglomeration (HCA). The annual emissions for CO, NOx, SO₂, NH₃, VOC_S, PM_2.5, PM₁₀, BC and OC during 2017 in the HCA were estimated to be 5.82 Tg, 0.70 Tg, 0.34 Tg, 0.75 Tg, 0.81Tg, 0.67 Tg, 1.59 Tg, 0.12 Tg and 0.26 Tg, respectively. For PM₁₀ and SO₂, the emissions from industry processes were the dominant contributors representing 54.7% and 49.5%, respectively, of the total emissions, while 95.3% and 44.5% of the total NH₃ and NOx emissions, respectively, were from or associated with agricultural activities and transportation. Spatiotemporal distributions showed that most emissions (except NH₃) occurred in November to March and were concentrated in the central cities of Changchun and Harbin and the surrounding cities. Open burning of straw made an important contribution to PM_2.5 in the central regions of the northeastern plain during autumn and spring, while domestic coal combustion for heating purposes was significant with respect to SO₂ and PM_2.5 emissions during autumn and winter. Furthermore, based on Principal Component Analysis and Multivariable Linear Regression model, air temperature, relative humidity, electricity and energy consumption, and the urban and rural population were optimized to be representative indicators for rapidly assessing the magnitude of regional atmospheric pollutants in the HCA. Such indicators and equations were demonstrated to be useful for local atmospheric environment management.     

Isolation and characterization of a strain with high microbial attachment in aerobic granular sludge

Aerobic granule is a special microbial aggregate associated with biofilm structure. The formation of aerobic granular sludge is primarily depending on its bacterial community and relevant microbiological properties. In this experiment, a strain with high microbial attachment was isolated from aerobic granular sludge, and the detailed characteristics were examined. Its high attachment ability could reach 2.34 (OD_600nm), while other low attachment values were only around 0.06-0.32, which indicated a big variation among the different bacteria. The strain exhibited a very special morphology with many fibric fingers under SEM observation. A distinctive behaviour was to form a spherical particle by themselves, which would be very beneficial for the formation and development of granular sludge. The EPS measurement showed that its PN content was higher than low attachment bacteria, and 3D-EEM confirmed that there were some different components. Based on the 16S rRNA analysis, it was identified to mostly belong to Stenotrophomonas. Its augmentation to particle sludge cultivation demonstrated that the strain could significantly promote the formation of aerobic granule. Conclusively, it was strongly suggested that it might be used as a good and potential model strain or chassis organism for the aerobic granular sludge formation and development.     

铝穹顶储罐雷击损伤及燃爆风险研究

针对铝穹顶储罐雷击问题,开展了回击后长持续时间雷电流分量作用下的铝合金板烧蚀损伤试验研究,分析了铝穹顶储罐损伤及油气燃爆风险。结果表明:当直流分量为164 C时,2 mm铝板发生穿孔,铝穹顶储罐存在雷击燃爆风险;当直流分量≤157 C时,未穿孔,背面温度最高为480℃,存在燃爆风险,铝穹顶储罐存在雷击燃爆风险;当直流分量196 C时,4 mm铝板发生穿孔;当直流分量为196 C时,6 mm铝板未发生穿孔,背面温升为125℃,小于205℃,铝穹顶储罐不存在雷击燃爆风险。     

控制回路的多维度性能评估方法研究

为评价炼化装置中各控制回路的性能,基于控制回路关键品质指标要求,采用控制回路的设定值、输出值、测量值、控制模式等过程参数设计了准确性指标、稳定性指标及快速性指标等性能评估指标。辅助技术人员在线进行控制回路性能评估,识别性能较差的控制回路,诊断异常原因并进行优化,提高装置的自动化水平。     

Centrifugal study of zone of influence during air-sparging

Air sparging (AS) is one of the groundwater remediation techniques for remediating volatile organic compounds (VOCs) in saturated soil. However, in spite of the success of air sparging as a remediation technique for the cleanup of contaminated soils, to date, the fundamental mechanisms or the physics of air flow through porous media is not well understood. In this study, centrifugal modeling tests were performed to investigate air flow rates and the evolution of the zone of influence during the air sparging under various g-levels. The test results show that with the increase in sparging pressure the mass flow rate of the air sparging volume increases. The air mass flow rate increases linearly with the effective sparging pressure ratio, which is the difference between sparging pressure and hydrostatic pressure normalized with respect to the effective overburden pressure at the sparging point. Also the slope of mass flow rate with effective sparging pressure ratio increases with higher g-levels. This variation of the slope of mass flow rate of air sparging volume versus effective sparging pressure ratio, M, is linear with g-level confirming that the air flow through soil for a given effective sparging pressure ratio only depends on the g-level. The test results also show that with increasing sparging pressure, the zone of influence (ZOI), which consists of the width at the tip of the cone or lateral intrusion and the cone angle, will lead to an increase in both lateral intrusion and the cone angle. With a further increase in air injection pressure, the cone angle reaches a constant value while the lateral intrusion becomes the main contributor to the enlargement of the ZOI. However, beyond a certain value of effective sparging pressure ratio, there is no further enlargement of the ZOI.     

Demonstration application of Chinese-made chlorine bypass system for stable cement kiln using calcium carbide residue as main raw material

Journal of Material Cycles and Waste Management - Chinese-made chlorine bypass system has been implemented to achieve stable and trouble-free kiln operation using calcium carbide residue (CCR) with...     

Effects of long-term nitrogen addition and precipitation changes on CH4 flux in an alpine steppe北大核心CSCD

土壤是甲烷(CH4)重要的源和汇.氮沉降和降水格局变化正在急剧改变土壤碳循环,进而可能对土壤CH4通量造成深刻影响.高寒生态系统是巨大的碳库,对氮沉降和降水变化十分敏感.然而,目前多数研究集中在短期实验上,缺乏对长期氮沉降和降水变化背景下CH4通量的响应及其调控因素的认识.以青藏高原高寒草原为研究对象,在2013年搭建模拟氮沉降和降水格局改变实验平台.基于静态箱–气相色谱法测定2020年生长季(5-10月)土壤CH4通量.结果显示,高寒草原土壤呈CH4的汇.氮添加没有显著改变生长季和植物生长高峰CH4通量.然而,降水变化显著改变了生长季和植物生长高峰CH4通量,其中降水增加(+50%降水)降低了CH4的吸收(分别为–16%和–45%),降水减少(–50%降水)增强了CH4的吸收(分别为+73%和+33%).进一步研究发现,与植物属性和功能基因丰度相比,土壤环境因子主导了CH4通量变化(解释率>90%).其中CH4通量与土壤含水量和温度显著正相关,与土壤pH显著负相关.综上所述,在未来全球变化情景下,降水格局改变更能调节青藏高原高寒草原CH4通量的变化.(图6表1参37)     

Effects of bedform migration on nutrient fluxes at the sediment–water interface: a theoretical analysis

Environmental Fluid Mechanics - Nutrient fluxes at the sediment–water interface are essential for water quality and aquatic ecosystems. In this study, a unified expression for the sediment...     

Techno-economic characteristics of wastewater treatment plants retrofitted from the conventional activated sludge process to the membrane bioreactor process

• Retrofitting from CAS to MBR increased effluent quality and environmental benefits. • Retrofitting from CAS to MBR increased energy consumption but not operating cost. • Retrofitting from CAS to MBR increased the net profit and cost efficiency. • The advantage of MBR is related to the adopted effluent standard. • The techno-economy of MBR improves with stricter effluent standards. While a growing number of wastewater treatment plants (WWTPs) are being retrofitted from the conventional activated sludge (CAS) process to the membrane bioreactor (MBR) process, the debate on the techno-economy of MBR vs. CAS has continued and calls for a thorough assessment based on techno-economic valuation. In this study, we analyzed the operating data of 20 large-scale WWTPs (capacity≥10000 m³/d) and compared their techno-economy before and after the retrofitting from CAS to MBR. Through cost-benefit analysis, we evaluated the net profit by subtracting the operating cost from the environmental benefit (estimated by the shadow price of pollutant removal and water reclamation). After the retrofitting, the removal rate of pollutants increased (e.g., from 89.0% to 93.3% on average for NH₃-N), the average energy consumption increased from 0.40 to 0.57 kWh/m³, but the operating cost did not increase significantly. The average marginal environmental benefit increased remarkably (from 0.47 to 0.66 CNY/g for NH₃-N removal), leading to an increase in the average net profit from 19.4 to 24.4 CNY/m³. We further scored the technical efficiencies via data envelopment analysis based on non-radial directional distance functions. After the retrofitting, the relative cost efficiency increased from 0.70 to 0.73 (the theoretical maximum is 1), while the relative energy efficiency did not change significantly. The techno-economy is closely related to the effluent standard adopted, particularly when truncating the extra benefit of pollutant removal beyond the standard in economic modeling. The modeling results suggested that MBR is more profitable than CAS given stricter effluent standards.