江苏新沂市越流含水层的地下水资源评价

中国利用越流含水层作为城市供水水源地的实例并不多见。本文根据实际开采资料,利用伽略金（Ｇａｌｅｒｋｉｎ）有限元法计算当补给层水头变化时越流含水层的地下水资源,并提出水位预测的方法。还利用补给层的水量平衡评价越流含水层开采量的保证程度,预测了新水源地投产后对老水源地的影响。本文对于正确认识越流含水层的地下水资源特性及其在城市供水中的意义有重要参考价值。     

受污染饮用水水源生物预处理技术

阐述了以石英砂、陶粒和弹性立体为填料的生物滤池、生物流化床和生物接触氧化等几种常见受污染饮用水水源生物预处理技术的工艺特点，运动参数及处理效果，及国内以淮水为源水的蚌埠自来水厂、以姚江为源水的宁波梅林和和以深圳水库为源水的，３个日处理量分别为１万ｔ、４万ｔ和４００万ｔ的生物预处理工程情况，并对生物接触氧化法预处理工艺的填料选择、挂膜、气水比和积泥反冲等技术问题进行了讨论。     

壳聚糖对染料的吸附动力学研究

通过壳聚糖吸附酸性染料普拉蓝RAWL和阳离子蓝染料X-GRRL的试验，研究了壳聚糖对这两种水溶性染料吸附的动力学行为，包括吸附速率K和颗粒内有效扩散系数Di′，同时通过对吸附焓△H的试验计算，初步分析了它们的吸附机理。     

水利工程规划中的环境保护方式的影响与应对研究

水利工程在社会发展过程中起到的作用日益明显。在建设水利工程的时候,不仅要在开工前对其相关影响因素进行分析,更要考虑工程项目建设完成后对河流生态系统的影响,以保障周边环境资源的可持续发展。在进行工程建设时要遵守环保原则。根据当地的实情,在保障工程安全的基础上既要提高经济收益,还要注重环境保护的问题。因此基于环保角度提出HSPF模型水利工程产流计算方法对工程项目进行监测评估并进行相应实验,该方法有助于推进水利工程建设项目良性发展.以达到水利工程建设项目环境影响最小化、经济和环境效益最大化目标。     

Framework for improved confidence in modeled nitrous oxide estimates for biofuel regulatory standards

Biofuels vary greatly in their carbon intensity, depending on the specifics of how they are produced. Policy frameworks are needed to ensure that biofuels actually achieve intended reductions in greenhouse gas emissions. Current approaches do not account for important variables during cultivation that influence emissions. Estimating emissions based on biogeochemical models would allow accounting of farm-specific conditions, which in turn provides an incentive for producers to adopt low emissions practices. However, there are substantial uncertainties in the application of biogeochemical models. This paper proposes a policy framework that manages this uncertainty while retaining the ability of the models to account for (and hence incentivize) low emissions practices. The proposed framework is demonstrated on nitrous oxide (N₂O) emissions from the cultivation of winter barley. The framework aggregates uncertainties over time, which (1) avoids penalizing producers for uncertainty in weather, (2) allows for a high degree of confidence in the emissions reductions achieved, and (3) attenuates the uncertainty penalties borne by producers within a timescale of several years. Results indicate that with effective management, N₂O emissions from feedstock cultivation may be <?5% of the carbon intensity of gasoline, whereas the existing policy approach estimates emissions >?20% of the carbon intensity of gasoline. If these emissions reductions are monetized, the framework can provide up to $0.002 per liter credits (0.8 cents per gallon) to fuel producers, which could incentivize emissions mitigation practices by biofuel feedstock suppliers, such as avoiding fall N application on silty clay loam soils. The conservatism in the current approach fails to incentivize the adoption of biofuels, while the lack of specificity fails to incentivize site-level mitigation practices. Improved uncertainty accounting and consideration of farm-level practices will incentivize mitigation efforts at landscape to global scales.     

Facile one-step synthesis of functionalized biochar from sustainable prolifera-green-tide source for enhanced adsorption of copper ions

The use of biochars formed by hydrothermal carbonization for the treatment of contaminated water has been greatly limited,due to their poorly developed porosity and low content of surface functional groups.Also,the most common modification routes inevitably require post-treatment processes,which are time-consuming and energy-wasting.Hence,the objective of this research was to produce a cost-effective biochar with improved performance for the treatment of heavy metal pollution through a facile one-step hydrothermal carbonization process coupled with ammonium phosphate,thiocarbamide,ammonium chloride or urea,without any posttreatment.The effects of various operational parameters,including type of modification reagent,time and temperature of hydrothermal treatment,and ratio of modification reagent to precursor during impregnation,on the copper ion adsorption were examined.The adsorption data fit the Langmuir adsorption isotherm model quite well.The maximum adsorption capacities(mg/g) of the biochars towards copper ions followed the order of 40-8 h-1.0-APBC(95.24) 140-8 h-0-BC(12.52) 140-8 h-1.0-TUBC(12.08) 140-8 h-1.0-ACBC(7.440) 140-8 h-1.0-URBC(5.277).The results indicated that biochars modified with ammonium phosphate displayed excellent adsorption performance toward copper ions,which was 7.6-fold higher than that of the pristine biochar.EDX and FT-IR analyses before and after adsorption demonstrated that the main removal mechanism involved complexation between the phosphate groups on the surface of the modified biochars and copper ions.     

Distribution of polychlorinated naphthalenes (PCNs) in the whole blood of typical meat animals

The concentrations and distribution of polychlorinated naphthalenes(PCNs) in the whole blood of eight typical terrestrial meat animals(chicken, duck, rabbit, pig, cattle, sheep,horse and donkey) consumed daily in our life were investigated. The total concentrations(on a liquid volume basis) of PCNs were in a range from 305 to 987 pg/L. Donkey blood contained the highest PCN concentrations. Mono-CNs were the dominant homolog group,accounting for 38%–71% PCNs. Apart from the mono-CNs and tri-CNs homolog groups, two hepta-CNs(mean: 9.5%) contributed most, followed by tetra-CNs(mean: 6.5%). The congeners CN1, 5/7, 24/14, 27/30, 52/60, 66/67, and 73 were the most abundant congeners or congener groups. The highest toxicity equivalencies(TEQs) were observed in cattle blood(117.4 fg TEQ/L) then chicken blood(117.1 fg TEQ/L). CN73 contributed 65% to total TEQs,followed by CN70(20%) and CN66/67(14%). The dietary intakes of PCNs were also estimated.Chicken meat, which forms the second largest component of meat product consumption in China, contributed most to the total TEQs(61%), followed by beef(27%) and pork(5.9%). The consumption of chicken might pose the highest risk from exposure to PCNs than other types of meat to populations who prefer to eat chicken meat.     

A case study of development and application of a streamlined control and response modeling system for PM2.5 attainment assessment in China

This article describes the development and application of a streamlined air control and response modeling system with a novel response surface modeling-linear coupled fitting method and a new module to provide streamlined model data for PM_(2.5) attainment assessment in China.This method is capable of significantly reducing the dimensions required to establish a response surface model,as well as capturing more realistic response of PM_(2.5) to emission changes with a limited number of model simulations.The newly developed module establishes a data link between the system and the Software for Model Attainment Test—Community Edition(SMAT-CE),and has the ability to rapidly provide model responses to emission control scenarios for SMAT-CE using a simple interface.The performance of this streamlined system is demonstrated through a case study of the Yangtze River Delta(YRD) in China.Our results show that this system is capable of reproducing the Community Multi-Scale Air Quality(CMAQ) model simulation results with maximum mean normalized error 3.5%.It is also demonstrated that primary emissions make a major contribution to ambient levels of PM_(2.5) in January and August(e.g.,more than50%contributed by primary emissions in Shanghai),and Shanghai needs to have regional emission control both locally and in its neighboring provinces to meet China's annual PM_(2.5)National Ambient Air Quality Standard.The streamlined system provides a real-time control/response assessment to identify the contributions of major emission sources to ambient PM_(2.5)(and potentially O_3 as well) and streamline air quality data for SMAT-CE to perform attainment assessments.     

基于DPSIR概念模型的土壤环境成效评估方法研究

土壤环境质量关系到农产品质量安全和人居环境健康。对优质土壤实施严格保护、对受污染土壤实施风险管控或治理与修复,构成了土壤污染防治的主体任务。为科学评价土壤污染防治成效,及时采取应对措施,切实维护土壤环境安全,文章在系统总结国内外关于指标概念框架、指标筛选方法等环境成效评估方法基础上,采用DPSIR(驱动力-压力-状态-影响-响应)概念模型,基于可统计、可分解、可考核的原则,构建了可应用于地市和县级行政区土壤污染防治成效评价的指标体系。     

谈露天煤矿的安全隐患与防范措施

＂安全为天、安全为本＂是生产、生活中永恒的主题。无论从事何种生产经营活动,都必须把安全作为一项基础工作来抓,处处体现＂安全第一、预防为主、综合治理＂的安全生产方针。