Deriving the factor structure of safety climate scales

Since the original formulation of the notion of safety climate, many people have developed safety climate measures and conducted factor analyses to identify distinct dimensions. Typically, these analyses were based on samples of workers in a limited number of workplaces, but since they did not allow for the non-independence of the data, they are incorrect. An appropriate analysis should use a multi-level method. This flaw in the analyses to date may at least partly explain the different factor structures of safety climate reported in the literature.     

Three-dimensional density-dependent flow and multicomponent reactive transport modeling of chlorinated solvent oxidation by potassium permanganate

A popular method for the treatment of aquifers contaminated with chlorinated solvents is chemical oxidation based on the injection of potassium permanganate (KMnO₄). Both the high density (1025 gL^− 1) and reactivity of the treatment solution influence the fate of permanganate (MnO₄) in the subsurface and affect the degree of contaminant treatment. The MIN3P multicomponent reactive transport code was enhanced to simulate permanganate-based remediation, to evaluate the pathways of MnO₄ utilization, and to assess the role of density contrasts for the delivery of the treatment solution. The modified code (MIN3P-D) provides a direct coupling between density-dependent fluid flow, solute transport, contaminant treatment, and geochemical reactions. The model is used to simulate a field trial of TCE oxidation in a sandy aquifer that is underlain by an aquitard. Three-dimensional simulations are conducted for a coupled reactive system comprised of ten aqueous components, two mineral phases, TCE (dissolved, adsorbed, and NAPL), reactive organic matter, and including ion exchange reactions. Model parameters are constrained by literature data and a detailed data set from the field site under investigation. The general spatial and transient evolution in observed concentrations of the oxidant, dissolved TCE, and reaction products are adequately reproduced by the simulations. The model elucidates the important role of density-induced flow and transport on the distribution of the treatment solution into NAPL containing regions located at the aquifer–aquitard interface. Model results further suggest that reactions that do not directly affect the stability of MnO₄ have a negligible effect on solution density and MnO₄ delivery.     

Using fisher-contributed secondary fins to fill critical shark-fisheries data gaps

Developing-world shark fisheries are typically not assessed or actively managed for sustainability; one fundamental obstacle is the lack of species and size-composition catch data. We tested and implemented a new and potentially widely applicable approach for collecting these data: mandatory submission of low-value secondary fins (anal fins) from landed sharks by fishers and use of the fins to reconstruct catch species and size. Visual and low-cost genetic identification were used to determine species composition, and linear regression was applied to total length and anal fin base length for catch-size reconstruction. We tested the feasibility of this approach in Belize, first in a local proof-of-concept study and then scaling it up to the national level for the 2017–2018 shark-fishing season (1,786 fins analyzed). Sixteen species occurred in this fishery. The most common were the Caribbean reef (Carcharhinus perezi), blacktip (C. limbatus), sharpnose (Atlantic [Rhizoprionodon terraenovae] and Caribbean [R. porosus] considered as a group), and bonnethead (Sphyrna cf. tiburo). Sharpnose and bonnethead sharks were landed primarily above size at maturity, whereas Caribbean reef and blacktip sharks were primarily landed below size at maturity. Our approach proved effective in obtaining critical data for managing the shark fishery, and we suggest the tools developed as part of this program could be exported to other nations in this region and applied almost immediately if there were means to communicate with fishers and incentivize them to provide anal fins. Outside the tropical Western Atlantic, we recommend further investigation of the feasibility of sampling of secondary fins, including considerations of time, effort, and cost of species identification from these fins, what secondary fin type to use, and the means with which to communicate with fishers and incentivize participation. This program could be a model for collecting urgently needed data for developing-world shark fisheries globally. Article impact statement: Shark fins collected from fishers yield data critical to shark fisheries management in developing nations.     

Matching innovations with potential users, a case study of potato IPM practices

Through interviews and mail surveys, Ohio potato (Solanum tuberosum) growers were surveyed concerning their willingness to adopt three cultural controls being developed for management of the Colorado potato beetle, Leptinotarsa decemlineata (Say), which had become increasingly difficult to control. The principal objective of the research was to obtain a deeper understanding of how farmers make decisions to adopt or not adopt new techniques and how these decisions are related to farmers' educational backgrounds and the way they currently manage their farms. The three cultural management options emphasized ecological approaches to habitat management rather than ecologically disruptive chemical control: (1) using host plants in overwintering sites to slow the spring movement of the beetles to potato fields, (2) using larger potato plants at field borders than in the center of the field as a spring trap crop, and (3) concentrating beetles in relatively small undefoliated areas to be killed with heat in late summer. Most respondents would not adopt these alternative pest management strategies, mainly because they perceived an unsatisfactory trade-off between logistic difficulties and expenses and population suppression they would achieve compared with traditional chemical control measures. Education correlated positively and experience in farming negatively with the willingness to try new pest management techniques. Additionally, growers responding more negatively to questions regarding integrated pest management strategies were more willing to experiment with the alternative techniques, a result attributed to either the survey design or an indication of experience with the more intensive management effort required for integrated pest management. This profile of potential innovators should be used by researchers to establish partnerships with farmers that could assist with both the research and development of new farming techniques and the adoption of successful systems by other farmers.     

Evaluating an Air Quality Health Index (AQHI) amendment for communities impacted by residential woodsmoke in British Columbia,Canada

ABSTRACT

Smoke from burning biomass is an important source of fine particulate matter (PM_2.5), but the health risks may not be fully captured by the Canadian Air Quality Health Index (AQHI). In May 2018, the province of British Columbia launched an evidence-based amendment (AQHI-Plus) to improve AQHI performance for wildfire smoke, but the AQHI-Plus was not developed or tested on data from the residential woodsmoke season. This study assesses how the AQHI and AQHI-Plus are associated with acute health outcomes during the cooler seasons of 2010–2017 in British Columbia, Canada. Monthly and daily patterns of temperature and PM_2.5 concentrations were used to identify Local Health Areas (LHAs) that were impacted by residential woodsmoke. The effects of the AQHI and AQHI-Plus on five acute health outcomes (including non-accidental mortality, outpatient physician visits, and medical dispensations for cardiopulmonary conditions) were estimated using generalized linear mixed effect models with Poisson distributions adjusted for long- and short-term temperature trends. Values of the Akaike information criterion (AIC) were compared to evaluate whether the AQHI or AQHI-Plus was better fitted to each health outcome. Eleven LHAs were categorized as woodsmoke-impacted. In these LHAs, the AQHI and AQHI-Plus associations with acute health outcomes were sensitive to temperature adjustments. After temperature adjustments, the most consistent associations were observed for the two asthma-specific outcomes where the AQHI-Plus was better fitted than the AQHI. The improved performance of the AQHI-Plus for susceptible populations with asthma is consistent between communities impacted by residential woodsmoke and wildfire smoke.

Implications: Canada’s Air Quality Health Index (AQHI) is a three pollutant index used to communicate the short term health impact of degraded air quality. As fine particulate matter (PM_2.5) is the lowest weighted pollutant in the AQHI, the index is poorly reflective of woodsmoke impacts. The present analysis found that an AQHI amendment developed for improved sensitivity to PM_2.5 during wildfire seasons (AQHI-Plus) is also more predictive of acute asthma-related health outcomes in communities impacted by residential woodsmoke. The BC Ministry of Environment and Climate Change Strategy has piloted the AQHI-Plus year-round. Other jurisdictions should consider whether their air quality indices are reflective of the risks posed by woodsmoke.     

Doubling sockeye salmon production in the Fraser River—Is this sustainable development?

We evaluate a proposal to double sockeye salmon production from the Fraser River and conclude that significant changes will be required to current management processes, particularly the way available catch is allocated, if the plan is to be consistent with five major principles embodied in the concept of sustainable development. Doubling sockeye salmon production will not, in itself, increase economic equity either regionally or globally. Developing nations may actually be hindered in their attempts to institute other, nonsalmon fisheries in the North Pacific Ocean as a result of the possible interception of salmon. Further, other users of the Fraser River basin will have to forgo opportunities so that salmon habitat can be conserved. If doubling sockeye salmon production is to meet the goal of doing more with less, it will be necessary to develop more efficient technologies to harvest the fish. If increasing salmon production is to reflect the integration of environmental and economic decision making at the highest level, then a serious attempt must be made to incorporate environmental assets into national economic accounting. Finally, to promote biodiversity and cultural self-sufficiency within the Fraser River basin, it will be important to safeguard the small, less-productive salmon stocks as well as the large ones and to allocate a substantial portion of the increased production to the Native Indian community.     

Effects of Ceiling-Mounted HEPA-UV Air Filters on Airborne Bacteria Concentrations in an Indoor Therapy Pool Building

Abstract

The purpose of this study was to assess the effectiveness of a new generation of high-volume, ceiling-mounted high-efficiency particulate air (HEPA)-ultraviolet (UV) air filters (HUVAFs) for their ability to remove or inactivate bacterial aerosol. In an environmentally controlled full-scale laboratory chamber (87 m³), and an indoor therapy pool building, the mitigation ability of air filters was assessed by comparing concentrations of total bacteria, culturable bacteria, and airborne endotoxin with and without the air filters operating under otherwise similar conditions. Controlled chamber tests with pure cultures of aerosolized Mycobacterium parafortuitum cells showed that the HUVAF unit tested provided an equivalent air-exchange rate of 11 hr^?1. Using this equivalent air-exchange rate as a design basis, three HUVAFs were installed in an indoor therapy pool building for bioaerosol mitigation, and their effectiveness was studied over a 2-year period. The HUVAFs reduced concentrations of culturable bacteria by 69 and 80% during monitoring periods executed in respective years. The HUVAFs reduced concentrations of total bacteria by 12 and 76% during the same monitoring period, respectively. Airborne endotoxin concentrations were not affected by the HUVAF operation.     

Simulation of the effect of remediation on EDB and 1,2-DCA plumes at sites contaminated by leaded gasoline

An analytical model is used to simulate the effects of partial source removal and plume remediation on ethylene dibromide (EDB) and 1,2-dichloroethane (1,2-DCA) plumes at contaminated underground storage tank (UST) sites. The risk posed by EDB, 1,2-DCA, and commingled gasoline hydrocarbons varies throughout the plume over time. Dissolution from the light nonaqueous phase liquid (LNAPL) determines the concentration of each contaminant near the source, but biological decay in the plume has a greater influence as distance downgradient from the source increases. For this reason, compounds that exceed regulatory standards near the source may not in downgradient plume zones. At UST sites, partial removal of a residual LNAPL source mass may serve as a stand alone remedial technique if dissolved concentrations in the source zone are within several orders of magnitude of the applicable government or remedial standards. This may be the case with 1,2-DCA; however, EDB is likely to be found at concentrations that are orders of magnitude higher than its low Maximum Contaminant Level (MCL) of 0.05 μg/L (micrograms per liter). For sites with significant EDB contamination, even when plume remediation is combined with source depletion, significant timeframes may be required to mitigate the impact of this compound. Benzene and MTBE are commonly the focus of remedial efforts at UST sites, but simulations presented here suggest that EDB, and to a lesser extent 1,2-DCA, could be the critical contaminants to consider in the remediation design process at many sites.