长江流域春夏旱涝灾害与太平洋海温关联性研究

基于长江流域区域1956-2011年50年气象资料和同期太平洋海温资料,采用Z指数、EOF、REOF、SVD分析等方法,探讨长江流域春季和夏季旱涝特征及其旱涝事件与极端海温异常之间的关联性,得出以下结论。1REOF的Z指数春夏季节旱涝空间分区特征显示,春季前6个模态的累计方差贡献率能够达到61.2%,收敛速度较平缓,夏季前6个模态累积方差贡献率更低,只有52.1%。2前冬太平洋海温的变化与长江流域旱涝的态势呈显著相关关系,春季海温场与长江流域旱涝Z指数场的SVD第一模态显示,长江流域的东北区的旱涝与厄尔尼诺显著相关,当赤道东太平洋海温升高,西太平洋海温降低时,长江流域东北地区偏涝,而长江流域的西部地区偏旱,反之亦然。3夏季海温场与长江流域旱涝Z指数场的SVD第一模态,表明太平洋海温分布主要呈现南北向的分布,当赤道中东太平洋海温偏高,北太平洋海温偏低时,长江流域夏季中部地区偏涝。反之亦然。第二模态,全球海温呈现厄尔尼诺类型的分布,中东太平洋是负相关,而在西太平洋为显著负相关。     

检测细胞DNA断裂损伤效应的彗星实验法的改良

为了解决彗星实验过程中常出现的脱胶、细胞核分离操作繁琐、重复性低等问题,对彗星实验方法进行了改良,初步建立了彗星实验的快速操作流程。结果显示,通过对载玻片进行预处理,可确保凝胶悬挂均匀;采用改良机械法分离的细胞核浓度适中;以0.5%(w/v)涂层琼脂糖作为基层、以1.5%(w/v)低熔点包埋琼脂糖作为叠加层的"双层凝胶法",辅以"推片法"铺胶,操作便捷且不发生脱胶现象;细胞核膜经裂解处理后再进行电泳和荧光观察,彗星图像清晰,杂质少。应用改良后的彗星实验方法,操作简便,耗时更短,实验效果良好,可快速检测出细胞DNA损伤效应。     

Investigation of carbonyl compound sources at a rural site in the Yangtze River Delta region of China

Carbonyl compounds are important intermediates in atmospheric photochemistry, but their primary sources are still not understood well. In this work, carbonyls, hydrocarbons, and alkyl nitrates were continuously measured during November 2011 at a rural site in the Yangtze River Delta region of China. Mixing ratios of carbonyls and hydrocarbons showed large fluctuations during the entire measurement. The average level for total measured volatile organic compounds during the pollution episode from 25th to 27th November, 2011 was 91.6 ppb, about 7 times the value for the clean period of 7th-8th, November, 2011. To preliminarily identify toluene sources at this site, the emission ratio of toluene to benzene (T/B) during the pollution episode was determined based on photochemical ages derived from the relationship of alkyl nitrates to their parent alkanes. The calculated T/B was 5.8 ppb/ppb, significantly higher than the values of 0.2-1.7 ppb/ppb for vehicular exhaust and other combustion sources, indicating the dominant influence of industrial emissions on ambient toluene. The contributions of industrial sources to ambient carbonyls were then calculated using a multiple linear regression fit model that used toluene and alkyl nitrates as respective tracers for industrial emission and secondary production. During the pollution episode, 18.5%, 69.0%, and 52.9% of measured formaldehyde, acetaldehyde, and acetone were considered to be attributable to industrial emissions. The emission ratios relative to toluene for formaldehyde, acetaldehyde, and acetone were determined to be 0.10, 0.20 and 0.40 ppb/ppb, respectively. More research on industrial carbonyl emission characteristics is needed to understand carbonyl sources better.     

Insights into metals in individual fine particles from municipal solid waste using synchrotron radiation-based micro-analytical techniques

Excessive inter-contamination with heavy metals hampers the application of biological treatment products derived from mixed or mechanically-sorted municipal solid waste (MSW). In this study, we investigated fine particles of < 2 mm, which are small fractions in MSW but constitute a significant component of the total heavy metal content, using bulk detection techniques. A total of 17 individual fine particles were evaluated using synchrotron radiation-based micro-X-ray fluorescence and micro-X-ray diffraction. We also discussed the association, speciation and source apportionment of heavy metals. Metals were found to exist in a diffuse distribution with heterogeneous intensities and intense hot-spots of < 10 μm within the fine particles. Zn-Cu, Pb-Fe and Fe-Mn-Cr had significant correlations in terms of spatial distribution. The overlapped enrichment, spatial association, and the mineral phases of metals revealed the potential sources of fine particles from size-reduced waste fractions (such as scraps of organic wastes or ceramics) or from the importation of other particles. The diverse sources of heavy metal pollutants within the fine particles suggested that separate collection and treatment of the biodegradable waste fraction (such as food waste) is a preferable means of facilitating the beneficial utilization of the stabilized products.     

Microcystis aeruginosa/Pseudomonas pseudoalcaligenes interaction effects on off-flavors in algae/bacteria co-culture system under different temperatures

We conducted an experiment to study the interaction effects of Microcystis aeruginosa and Pseudomonas pseudoalcaligenes on off-flavors in an algae/bacteria co-culture system at three temperatures (24, 28 and 32°C). Gas chromatography–mass spectrometry was applied to measure off-flavor compounds dimethyl sulfide (DMS), dimethyl trisulfide (DMTS), 2-methylisoborneol, geosmin (GEO) and β-cyclocitral. During the lag phase of co-cultured M. aeruginosa (first 15 days), P. pseudoalcaligenes significantly increased the production of DMS, DMTS and β-cyclocitral at all three temperatures. In the exponential phase of co-cultured M. aeruginosa (after 15 days), M. aeruginosa became the main factor on off-flavors in the co-culture system, and β-cyclocitral turned to the highest off-flavor compound. These results also indicated that DMS, DMTS and β-cyclocitral were the main off-flavor compounds in our M. aeruginosa/P. pseudoalcaligenes co-culture system. Univariate analysis was applied to investigate the effects of M. aeruginosa and P. pseudoalcaligenes on the production of off-flavors. The results demonstrated that both M. aeruginosa and P. pseudoalcaligenes could increase the production of DMS and DMTS, while β-cyclocitral was mainly determined by M. aeruginosa. Our results also provide some insights into understanding the relationship between cyanobacteria and heterotrophic bacteria.     

Phosphorus recovery from biogas fermentation liquid by Ca–Mg loaded biochar

Shortage in phosphorus (P) resources and P wastewater pollution is considered as a serious problem worldwide. The application of modified biochar for P recovery from wastewater and reuse of recovered P as agricultural fertilizer is a preferred process. This work aims to develop a calcium and magnesium loaded biochar (Ca–Mg/biochar) application for P recovery from biogas fermentation liquid. The physico-chemical characterization, adsorption efficiency, adsorption selectivity, and postsorption availability of Ca-Mg/biochar were investigated. The synthesized Ca–Mg/biochar was rich in organic functional groups and in CaO and MgO nanoparticles. With the increase in synthesis temperature, the yield decreased, C content increased, H content decreased, N content remained the same basically, and BET surface area increased. The P adsorption of Ca–Mg/biochar could be accelerated by nano-CaO and nano-MgO particles and reached equilibrium after 360 min. The process was endothermic, spontaneous, and showed an increase in the disorder of the solid–liquid interface. Moreover, it could be fitted by the Freundlich model. The maximum P adsorption amounts were 294.22, 315.33, and 326.63 mg/g. The P adsorption selectivity of Ca–Mg/biochar could not be significantly influenced by the typical pH level of biogas fermentation liquid. The nano-CaO and nano-MgO particles of Ca–Mg/biochar could reduce the negative interaction effects of coexisting ions. The P releasing amounts of postsorption Ca–Mg/biochar were in the order of Ca–Mg/B600 > Ca–Mg/B450 > Ca–Mg/B300. Results revealed that postsorption Ca–Mg/biochar can continually release P and is more suitable for an acid environment.     

Microcystis aeruginosa/Pseudomonas pseudoalcaligenes interaction effects on off-flavors in algae/bacteria co-culture system under different temperatures

We conducted an experiment to study the interaction effects of Microcystis aeruginosa and Pseudomonas pseudoalcaligenes on off-flavors in an algae/bacteria co-culture system at three temperatures(24, 28 and 32℃). Gas chromatography–mass spectrometry was applied to measure off-flavor compounds dimethyl sulfide(DMS), dimethyl trisulfide(DMTS),2-methylisoborneol, geosmin(GEO) and β-cyclocitral. During the lag phase of co-cultured M. aeruginosa(first 15 days), P. pseudoalcaligenes significantly increased the production of DMS, DMTS and β-cyclocitral at all three temperatures. In the exponential phase of co-cultured M. aeruginosa(after 15 days), M. aeruginosa became the main factor on off-flavors in the co-culture system, and β-cyclocitral turned to the highest off-flavor compound. These results also indicated that DMS, DMTS and β-cyclocitral were the main off-flavor compounds in our M. aeruginosa/P. pseudoalcaligenes co-culture system. Univariate analysis was applied to investigate the effects of M. aeruginosa and P. pseudoalcaligenes on the production of off-flavors. The results demonstrated that both M. aeruginosa and P. pseudoalcaligenes could increase the production of DMS and DMTS, while β-cyclocitral was mainly determined by M. aeruginosa. Our results also provide some insights into understanding the relationship between cyanobacteria and heterotrophic bacteria.     

Insights into metals in individual fine particles from municipal solid waste using synchrotron radiation-based micro-analytical techniques

Excessive inter-contamination with heavy metals hampers the application of biological treatment products derived from mixed or mechanically-sorted municipal solid waste(MSW). In this study, we investigated fine particles of 2 mm, which are small fractions in MSW but constitute a significant component of the total heavy metal content, using bulk detection techniques. A total of 17 individual fine particles were evaluated using synchrotron radiation-based micro-X-ray fluorescence and micro-X-ray diffraction. We also discussed the association, speciation and source apportionment of heavy metals. Metals were found to exist in a diffuse distribution with heterogeneous intensities and intense hot-spots of 10 μm within the fine particles. Zn–Cu, Pb–Fe and Fe–Mn–Cr had significant correlations in terms of spatial distribution. The overlapped enrichment, spatial association, and the mineral phases of metals revealed the potential sources of fine particles from size-reduced waste fractions(such as scraps of organic wastes or ceramics) or from the importation of other particles. The diverse sources of heavy metal pollutants within the fine particles suggested that separate collection and treatment of the biodegradable waste fraction(such as food waste) is a preferable means of facilitating the beneficial utilization of the stabilized products.     

东江源头区典型村庄厨余废水水质分析

在东江源头区选取了3个典型村庄,对其厨余废水的水质进行调查分析。结果表明:东江源头区沿江村庄农户家庭厨余废水中TP、NH 3-N和COD浓度远远超过《城镇污水处理厂污染物排放标准》中一级A标准限值,需经进一步处理后排放;夏秋季节,厨余废水中TP、NH 3-N、COD浓度高于春季;村庄的经济发展水平对厨余废水水质有一定影响,经济发展水平高的村庄排放的厨余废水中污染物的浓度较经济水平较低的村庄厨余废水中污染物的浓度低。     

焦化行业环境风险预测应用

以焦化行业中典型企业——徐州某焦化生产企业年产100万t捣固焦生产线项目为例,采用新的评价体系和数学模式对项目环境风险进行定量的预测评价,在环境风险定量预测方面作出了有益的尝试,对同类焦化行业环境风险预测及防范具有很好的借鉴意义.