Distribution and variability of redox zones controlling spatial variability of arsenic in the Mississippi River Valley alluvial aquifer, southeastern Arkansas

Twenty one of 118 irrigation water wells in the shallow (25-30 m thick) Mississippi River Valley alluvial aquifer in the Bayou Bartholomew watershed, southeastern Arkansas had arsenic (As) concentrations (<0.5 to 77 microg/L) exceeding 10 microg/L. Sediment and groundwater samples were collected and analyzed from the sites of the highest, median, and lowest concentrations of As in groundwater in the alluvial aquifers located at Jefferson County, Arkansas. A traditional five-step sequential extraction was performed to differentiate the exchangeable, carbonate, amorphous Fe and Mn oxide, organic, and hot HNO(3)-leachable fraction of As and other compounds in sediments. The Chao reagent (0.25 M hydroxylamine hydrochloride in 0.25 M HCl) removes amorphous Fe and Mn oxides and oxyhydroxides (present as coatings on grains and amorphous minerals) by reductive dissolution and is a measure of reducible Fe and Mn in sediments. The hot HNO(3) extraction removes mostly crystalline metal oxides and all other labile forms of As. Significant total As (20%) is complexed with amorphous Fe and Mn oxides in sediments. Arsenic abundance is not significant in carbonates or organic matter. Significant (40-70 microg/kg) exchangeable As is only present at shallow depth (0-1 m below ground surface). Arsenic is positively correlated to Fe extracted by Chao reagent (r=0.83) and hot HNO(3) (r=0.85). Arsenic extracted by Chao reagent decreases significantly with depth as compared to As extracted by hot HNO(3). Fe (II)/Fe (the ratio of Fe concentration in the extracts of Chao reagent and hot HNO(3)) is positively correlated (r=0.76) to As extracted from Chao reagent. Although Fe (II)/Fe increases with depth, the relative abundance of reducible Fe decreases noticeably with depth. The amount of reducible Fe, as well as As complexed to amorphous Fe and Mn oxides and oxyhydroxides decreases with depth. Possible explanations for the decrease in reducible Fe and its complexed As with depth include historic flushing of As and Fe from hydrous ferric oxides (HFO) by microbially-mediated reductive dissolution and aging of HFO to crystalline phases. Hydrogeochemical data suggests that the groundwater in the area falls in the mildly reducing (suboxic) to relatively highly reducing (anoxic) zone, and points to reductive dissolution of HFO as the dominant As release mechanism. Spatial variability of gypsum solubility and simultaneous SO(4)(2-) reduction with co-precipitation of As and sulfide is an important limiting process controlling the concentration of As in groundwater in the area.     

Hydrologic Modeling of an Extreme Flood in the Guadalupe River in Texas1

Sharif, Hatim O., Almoutaz A. Hassan, Sazzad Bin-Shafique, Hongjie Xie, and Jon Zeitler, 2010. Hydrologic Modeling of an Extreme Flood in the Guadalupe River in Texas. Journal of the American Water Resources Association (JAWRA) 1-11. DOI: 10.1111/j.1752-1688.2010.00459.x Abstract: Many of the storms creating the greatest rainfall depths in Texas, measured over durations ranging from one minute to 48 hours, have occurred in the Texas Hill Country area. The upstream portion of the Guadalupe River Basin, located in the Texas Hill Country, is susceptible to flooding and rapid runoff due to thin soils, exposed bedrock, and sparse vegetation, in addition to the Balcones Escarpment uplift contributing to precipitation enhancement. In November 2004, a moist air mass from the Gulf of Mexico combined with moist air from the Pacific Ocean resulted in the wettest November in Texas since 1895. Although the peak discharges were not the highest on record, the U.S. Geological Survey (USGS) stream gauge on the Guadalupe River at Gonzales, Texas reported a daily mean discharge of 2,304 m³/s on November 23, 2004 (average discharge is 53 m³/s). In this paper, we examine the meteorological conditions that led to this event and apply a two-dimensional, physically based, distributed-parameter hydrologic model to simulate the response of a portion of the basin during this event. The study results clearly demonstrate the ability of physically based, distributed-parameter simulations, driven by operational radar rainfall products, to adequately model the cumulative effect of two rainfall events and route inflows from three upstream watersheds without the need for significant calibration.     

Precipitation Amount and Intensity Trends Across Southwest Saudi Arabia

This study examines precipitation accumulation and intensity trends across a region in southwest Saudi Arabia characterized by distinct seasonal weather patterns and mountainous terrain. The region is an example of an arid/semiarid area faced with maintaining sustainable water resources with a growing population. Annual and seasonal trends in precipitation amount were examined from 29 rain gages divided among four geographically unique regions from 1945/1946 to 2009. Two of the regions displayed significantly declining annual trends over the time series using a Mann‐Kendall test modified for autocorrelation (α < 0.05). Seasonal analysis revealed insignificant declining trends in at least two of the regions during each season. The largest and most consistent declining trends occurred during wintertime where all regions experienced negative trends. Several intensity metrics were examined in the study area from four additional stations containing daily data from 1985 to 2011. Intensity metrics included total precipitation, wet day count, simple intensity index, maximum daily annual rainfall, and upper/lower precipitation distribution changes. In general, no coherent trends were found among the daily stations suggesting precipitation is intensifying across the study area. The work represents the first of its size in the study area, and one of few in the region due to the lack of available long‐term data needed to properly examine precipitation changes.     

Energy and environmental applications of carbon nanotubes

Energy and environment are major global issues inducing environmental pollution problems. Energy generation from conventional fossil fuels has been identified as the main culprit of environmental quality degradation and environmental pollution. In order to address these issues, nanotechnology plays an essential role in revolutionizing the device applications for energy conversion and storage, environmental monitoring, as well as green engineering of environmental friendly materials. Carbon nanotubes and their hybrid nanocomposites have received immense research attention for their potential applications in various fields due to their unique structural, electronic and mechanical properties. Here, we review the applications of carbon nanotubes (1) in energy conversion and storage such as in solar cells, fuel cells, hydrogen storage, lithium ion batteries and electrochemical supercapacitors, (2) in environmental monitoring and wastewater treatment for the detection and removal of gas pollutants, pathogens, dyes, heavy metals and pesticides and (3) in green nanocomposite design. Integration of carbon nanotubes in solar and fuel cells has increased the energy conversion efficiency of these energy conversion applications, which serve as the future sustainable energy sources. Carbon nanotubes doped with metal hydrides show high hydrogen storage capacity of around 6?wt% as a potential hydrogen storage medium. Carbon nanotubes nanocomposites have exhibited high energy capacity in lithium ion batteries and high specific capacitance in electrochemical supercapacitors, in addition to excellent cycle stability. High sensitivity and selectivity towards the detection of environmental pollutants are demonstrated by carbon nanotubes based sensors, as well as the anticipated potentials of carbon nanotubes as adsorbent to remove environmental pollutants, which show high adsorption capacity and good regeneration capability. Carbon nanotubes are employed as reinforcement material in green nanocomposites, which is advantageous in supplying the desired properties, in addition to the biodegradability. This article presents an overview of the advantages imparted by carbon nanotubes in electrochemical devices of energy applications and green nanocomposites, as well as nanosensor and adsorbent for environmental protection.     

On the nonlinear effects of energy consumption,economic growth,and tourism on carbon footprints in the USA

Environmental Science and Pollution Research - The present paper implements the quantile autoregressive lagged (QARDL) approach of Cho et al. (2015) and the Granger causality in quantiles tests of...     

Association of textile industry effluent with mutagenicity and its toxic health implications upon acute and sub-chronic exposure

Complex industrial discharges pose certain risks to the ecosystem. This study was aimed at identifying acute and sub-chronic toxicological effects of the textile industry wastewater. The textile wastewater was evaluated for the metals and organic pollutants by atomic absorption spectrophotometer and GC-MS respectively. In vitro genotoxicity and mutagenicity were assessed by Comet assay in peripheral lymphocytes isolated from Ovis aries and Ames test in Salmonella typhimurium strains TA-100 and 102 respectively. Physiological and behavioral changes along with systemic toxicity were determined in Rattus norvegicus albinus following acute and sub-chronic exposure. High amount of heavy metals such as Cr, Pb, Hg, As, and Cd were detected in textile wastewater. Organic pollutants such as 25-deacetoxy cucurbitacin-b, E-14-Hexadecenal, 11-Tricosene, and phthalates were also found. In vitro genotoxicity assessment in lymphocytes showed statistically significant DNA damaging potential of textile wastewater. Textile wastewater also showed significantly higher (p? 0.05) mutagenic potential in Salmonella TA-100 and TA-102 strains than sodium azide and 2-amino anthracycline. Acute exposure of textile wastewater to Rattus norvegicus was associated with several physiological changes and behavioral symptoms. Sub-chronic exposure of textile wastewater in Rattus norvegicus instigated the degeneration and necrosis of epithelial cells in renal tubules, hydropic degeneration and necrosis of hepatocytes, peri-bronchiolar infiltration and emphysema of the alveoli, and the degradation of myocardial cells. This study concludes that the textile wastewater may cause genotoxicity and mutagenicity, result in physiological and behavioral changes upon acute exposure, and inflict various pathological lesions upon sub-chronic exposure.     

Community attitudes toward forest conservation programs through collaborative protected area management in Bangladesh

The formulation of conservation policies with options for creating protected areas is significantly influenced by the social factors of the surrounding communities. Therefore, indigenous knowledge, attitudes and perceptions of the local communities need to be explored during the planning and implementation stages of conservation projects. A government-initiated experiment in co-management was conducted in the Rema-Kalenga Wildlife Sanctuary, Bangladesh. This paper analyzes the attitudes toward conservation by members of local communities living in and around the wildlife sanctuary. Training incentives on alternative income-generating (AIG) activities and allotment of agricultural lands were distributed among the Forest User Groups. It is of interest to policy makers and resource managers whether this technique leads to improved attitudes on the part of local people. Although there were different attitudes toward protected areas and conservation, overall, a favorable attitude of the respondents was observed. The opinions of respondents also varied based on factors such as village position, village dependency level on forest resources, ethnicity and gender. Increase in annual income resulting from the augmented skills by trainings on AIG activities and getting agricultural lands leased from the Forest Department contributed significantly to the variation in respondents’ conservation attitudes. It is suggested that eliminating inequity and inequality in incentive distribution, discovering and launching training on more need-based livelihood activities, and liberalizing the restriction of resource extraction from the protected area by fixing the harvesting limit would encourage the community to be more cordially and actively involved in the conservation efforts of the sanctuary.     

Conversion of chicken feather waste via hydrothermal carbonization: process optimization and the effect of hydrochar on seed germination of Acacia auriculiformis

Journal of Material Cycles and Waste Management - Using statistical response surface methodology this paper primarily investigates the role of process parameters at different levels (temperature,...     

Development of Anticorrosive Poly(Ether-Urethane) Amide Coatings from Linseed Oil: A Sustainable Resource

Polyetheramide(PEtA) resin was synthesized by the condensation polymerization of N,N-bis(2-hydroxy ethyl) linseed oil fatty amide diol (HELA) with resorcinol. It was further treated with different percentage of toluylene 2-4-diisocyanate (TDI) to obtain the urethane modified polyetheramide resins (UPEtA). The structural elucidation of PEtA and urethane modified polyetheramide(UPEtA) were carried out by FT-IR, ¹H-NMR and ¹³C-NMR spectroscopic techniques. These analyses confirm the formation of PEtA and UPEtA. Physico-chemical and physico-mechanical analysis were performed by standard laboratory methods. The resin composition UPEtA-24 showed best physico-mechanical properties with scratch hardness 2.0 kg, impact resistance 150 lb/in. and good bending ability. The thermal stability and curing behavior of polymers were respectively studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Thermal analysis shows that these coatings can be used safely upto 190 °C. The coatings of UPEtA resins were prepared on mild steel strips. The anticorrosive behavior of UPEtA coatings were investigated in acid, alkali, water and xylene. All the coatings exhibit good chemical resistance performance in acid, alkali, saline and organic solvents, while the resin UPEtA-24 shows the best performance.