Quality improvement of pyrolysis oil from waste rubber by adding sawdust

This work was aimed at improving the pyrolysis oil quality of waste rubber by adding larch sawdust. Using a 1 kg/h stainless pyrolysis reactor, the contents of sawdust in rubber were gradually increased from 0%, 50%, 100% and 200% (wt%) during the pyrolysis process. Using a thermo-gravimetric (TG) analyzer coupled with Fourier transform infrared (FTIR) analysis of evolving products (TG–FTIR), the weight loss characteristics of the heat under different mixtures of sawdust/rubber were observed. Using the pyrolysis–gas chromatography (GC)–mass spectrometry (Py–GC/MS), the vapors from the pyrolysis processes were collected and the compositions of the vapors were examined. During the pyrolysis process, the recovery of the pyrolysis gas and its composition were measured in-situ at a reaction temperature of 450 °C and a retaining time of 1.2 s. The results indicated that the efficiency of pyrolysis was increased and the residual carbon was reduced as the percentage of sawdust increased. The adding of sawdust significantly improved the pyrolysis oil quality by reducing the polycyclic aromatic hydrocarbons (PAHs) and nitrogen and sulfur compounds contents, resulting in an improvement in the combustion efficiency of the pyrolysis oil.     

The 1999 Fresno particulate matter exposure studies: comparison of community, outdoor, and residential PM mass measurements

Two collaborative studies have been conducted by the U.S. Environmental Protection Agency (EPA) National Exposure Research Laboratory (NERL) and National Health and Environmental Effects Research Laboratory to determine personal exposures and physiological responses to particulate matter (PM) of elderly persons living in a retirement facility in Fresno, CA. Measurements of PM and other criteria air pollutants were made inside selected individual residences within the retirement facility and at a central outdoor site on the premises. In addition, personal PM exposure monitoring was conducted for a subset of the participants, and ambient PM monitoring data were available for comparison from the NERL PM research monitoring platform in central Fresno. Both a winter (February 1-28, 1999) and a spring (April 19-May 16, 1999) study were completed so that seasonal effects could be evaluated. During the spring study, a more robust personal exposure component was added, as well as a more detailed evaluation of physical factors, such as air-exchange rate, that are known to influence the penetration of particles into the indoor environment. In this paper, comparisons are made among measured personal PM exposures and PM mass concentrations measured at the NERL Fresno Platform site, outside on the premises of the retirement facility, and inside selected residential apartments at the facility during the two 28-day study periods. The arithmetic daily mean personal PM2.5 exposure during the winter study period was 13.3 micrograms/m3, compared with 9.7, 20.5, and 21.7 micrograms/m3 for daily mean overall apartment, outdoor, and ambient (i.e., platform) concentrations, respectively. The daily mean personal PM2.5 exposure during the spring study period was 11.1 micrograms/m3, compared with 8.0, 10.1, and 8.6 micrograms/m3 for the daily mean apartment, outdoor, and ambient concentrations, respectively.     

summary of the California aerosol characterization experiment

This report gives a brief summary of the experimental plan and the early results of field observations from the California Aerosol Characterization Experiment (ACHEX). The objectives of the program center on questions of the sources and evolution of aerosols in urban air, as they are superimposed on a natural background, particularly as they relate to visibilitydegradation. The project initially nvolved the use of an elaborately instrumented mobile laboratory combined with a fixed station in San Jose, in Pasadena, and in Riverside, and later incorporated several satellite monitoring stations in the Los Angeles Basin. Intensive field observationswere taken from July 1972 to November 1972 in several urban and nonurban locations between the San Francisco Bay area and the South Coast Basin, covering the Los Angeles area. In a second phase of the ACHEX, aerosols accompanying photochemical smog were studied intensively in the Los Angeles Basin during the period between July and October of 1973. The observations cover a wide variety of parameters including physical and chemical properties of aerosols, pollutant gas concentrations, and meteorological variables. The initial results show the great importance of sulfate, nitrate, noncarbonate carbon, and liquid water to the mass concentration of airborne particles and their relation to reduction in visibility. The anthropogenic contribution to atmospheric aerosols is consistently found to be allocated primarily to the submicron or fine particle size range.     

Heavy Metals in Urban Soils of East St. Louis,IL, Part I: Total Concentration of Heavy Metals in Soils

ABSTRACT

The city of East St. Louis, IL, has a history of abundant industrial activities including smelters of ferrous and non-ferrous metals, a coal-fired power plant, companies that produce organic and inorganic chemicals, and petroleum refineries. A protocol for soil analysis was developed to produce sufficient information on the extent of heavy metal contamination in East St. Louis soils. Soil cores representing every borough of East St. Louis were analyzed for heavy metals—As, Cd, Cu, Cr, Hg, Ni, Pb, Sb, Sn, and Zn. The topsoil contained heavy metal concentrations as high as 12.5 ppm Cd, 14,400 ppm Cu, ppm quantities of Hg, 1860 ppm Pb, 40 ppm Sb, 1130 ppm Sn, and 10,360 ppm Zn. Concentrations of Sb, Cu, and Cd were well correlated with Zn concentrations, suggesting a similar primary industrial source. In a sandy loam soil from a vacated rail depot near the bank of the Mississippi River, the metals were evenly distributed down to a 38-cm depth. The clay soils within a half-mile downwind of the Zn smelter and Cu products company contained elevated Cd (81 ppm), Cu (340 ppm), Pb (700 ppm), and Zn (6000 ppm) and displayed a systematic drop in concentration of these metals with depth. This study demonstrates the often high concentration of heavy metals heterogeneously distributed in the soil and provides baseline data for continuing studies of heavy metal soil leachability.     

Predicting aoueous solubility of organic nonelectrolytes from molar volume

Correlation equations relating aqueous solubility to molar volume and aqueous solubility to total molecular surface area were derived by regression analysis for several chemical classes which included both liquids and solids. These were similar to equations relating solubility with total molecular surface area and had similar correlation coefficients. The physical significance of the regression parameters obtained is discussed.     

A study of effects of ambient urban air pollution using personal samplers; a preliminary report

Air pollution has been associated with an increased incidence of respiratory disease. However, significant differences may exist between air pollution levels measured at conventional fixed monitoring stations and actual levels inhaled by a subject. Furthermore, studies of effects of air pollution might best be done using asthmatics as study subjects, since they have irritable airways. This is a preliminary report of a study using a control and asthmatic group in which effects of air pollution are assessed by sympton and medication diaries and simple pulmonary function tests. Air pollution exposure is measured using a small portable sampler for particulates, SO₂ and NO₂; these samplers are carried by the subject (“personal”) and are situated inside and outside the home. Levels obtained are compared to data obtained from the same type of sampler located at a fixed monitoring station. Preliminary analysis of the data shows that the levels of pollutants are low and there are significant differences between the four air pollution measurements, with weak correlations among the various measurements. In this preliminary report, change in pulmonary function during the day correlates only with personal NO₂ measurements. This suggests the need for estimating air pollution exposure using “personal” samplers, when investigating health effects.     

Regulatory Oversight of Genetically Engineered Microorganisms: Has Regulation Inhibited Innovation?

/ Using detailed interviews with company representatives and researchers in the field, this paper examines the factors that might account for the slow pace of development of genetically engineered microorganisms (GEMs) intended for environmental release. We specifically analyzed the role of the regulatory system in shaping innovation. We identified at least two cases where industry decided to discontinue the development of a genetically engineered microbial product because of concerns over regulatory oversight. However, most often industry decisions to continue or halt development of GEMs were based on an evaluation of the particular product's efficacy and potential for profitability. Thus the inability of GEMs to perform up to expectations in the field, rather than the regulatory constraints, appears to be the factor responsible for the slow pace of development. KEY WORDS: Genetically engineered microorganisms; Biotechnology; Regulation of biotechnology; Innovation; Environmental release     

Risk communication in the internet age: The rise of disorganized skepticism

Communicating risks has become a core ingredient in the regulatory functions of government, interest group advocacy, public health, and corporate relations. The channels of risk communication have grown in complexity along with the development and expansion of the Internet and the birth of personalized blogging. This paper discusses three stages in the development of risk communication as an area of study and research. It examines the way risk is framed in three channels of communication, newsprint, the Expanded Academic Index, and Google using the example of the controversial chemical perfluorooctanoic acid (PFOA). The paper concludes that the Internet, as illustrated by the Google search engine, has created more opportunities for citizen learning and expanded the breadth and channels of risk communication, while also providing new opportunities for stakeholders to influence the message. Democritization of information does not necessarily create greater concordance between the cultural and technical assessment of risk.