Decolorization and biodegradability of photocatalytic treated azo dyes and wool textile wastewater

The photodegradation and biodegradability have been investigated for four non-biodegradable commercial azo dyes, Reactive YellowKD-3G, Reactive Red 15, Reactive Red 24, Cationic Blue X-GRL, an indicator. Methyl Orange, and one industrial wool textile wastewater, using TiO2 suspensions irradiated with a medium pressure mercury lamp. The color removal of dyes solution and dyeing wastewater reached to above 90% within 20-30 min. of photocatalytic treatment. Biochemical oxygen demand (BOD) was found to increase, while chemical oxygen demand (COD), total organic carbon (TOC) decreased, so that the ratio of BOD5/COD of the wastewater increased from original zero up to 0.75. The result implies that photocatalytic oxidation enhanced the biodegradability of the dye-containing wastewater and therefore relationship between decolorization and biodegradability exists. When the color disappeared completely, the wastewater biodegraded normally and could be discharged for further treatment. The experimental results demonstrate that it is possible to combine photocatalysis with conventional biological treatment for the remedy of wastewater containing generally non-biodegradable azo dyes.     

Adsorbent selection for endosulfan removal from water environment

In the present study, an attempt was made to select a low cost adsorbing material for the removal of endosulfan [C,C'-(1,4,5,6,7,7-hexachloro-8,9,10- trinorborn-5-en-2,3-ylene)(dimethylsulphite)] from water. Various low cost adsorbents like wood charcoal, kimberlite tailings, silica, macro fungi sojar caju were tried with activated charcoal as reference material. The above materials were selected from various sources encompassing organic, inorganic, clayey, and biological sources. For the selection of suitable adsorbent for endosulfan uptake, maximum adsorption capacity (Qmax) was chosen as the parameter. Kinetic profiles of removal were generated for all the materials to assess the equilibrium time. Equilibrium studies were carried out for all materials to assess the adsorption equilibrium model that they followed. The model that gave the best correlation coefficient by linear regression analysis, was adopted for the calculation of Qmax of the corresponding adsorbent material. Using linearised forms of equilibrium models like Langmuir, BET, and Freundlich, maximum adsorptive capacities were determined. Activated charcoal showed the best adsorptive capacity with Qmax of 2.145 mg/g followed by wood charcoal 1.773 mg/g, sojar caju 1.575 mg/g, kimberlite tailings 0.8821 mg/g, and silica 0.3231 mg/g. Albeit activated charcoal gave better performance, it was not considered as a candidate material because of its high cost. Wood charcoal was the next best adsorbent with Qmax 1.773 mg/g. Therefore, wood charcoal was chosen as the best material for endosulfan removal. The study of physical and chemical characteristics of wood charcoal revealed that it is a potential adsorbent and can even be improved further.     

MBR+CSTR联合工艺处理精对苯二甲酸生产废水

通过MBR＋CSTR两段好氧法对精对苯二甲酸生产废水进行处理,取得了令人满意的结果。经过MBR反应器,CODCr由5000mg／L降为500mg／L以下,并且很好地控制了系统pH的上升。在CSTR反应器中CODe。能降至35mg／L,达到国家污水综合排放一级标准（GB8978-1996）。     

Algal-bacterial interactions in metal contaminated floodplain sediments

The aim of the present study was to investigate algal-bacterial interactions in a gradient of metal contaminated natural sediments. By means of multivariate techniques, we related the genetic structure (denaturing gradient gel electrophoresis, DGGE) and the physiological structure (community-level physiological profiling, CLPP) of the bacterial communities to the species composition of the algal communities and to the abiotic environmental variables, including metal contamination. The results revealed that genetic and physiological structure of the bacterial communities correlated with the species composition of the algal community, but hardly to the level of metal pollution. This must be interpreted as an indication for a strong and species-specific linkage of algal and bacterial species in floodplain sediments. Metals were, however, not proven to affect either the algal or the bacterial communities of the Dutch river floodplains.     

Consumer attitudes on the use of plastic and cloth bags

This paper examines consumer attitudes and behavior on the use of plastic and cloth bags in Eski?ehir, Turkey. To this end, a structural equation model is proposed. Environmental consciousness regarding the use of plastic bags, social pressure, support for the banning of plastic bags, the intention to use cloth bags and behavior to reduce plastic bag use are employed as latent variables in the model. The intention to use cloth bags and the behavior to reduce the use of plastic bags are defined as endogenous latent variables in the structural model. In the conclusion of the study, it is identified that consumers who are environmentally conscious and feel under social pressure, tend to reduce the use of plastic bags and switch to using cloth bags.     

Effects of compression ratio,swirl augmentation techniques and ethanol addition on the combustion of CNG–biodiesel in a dual-fuel engine

The diminishing resources and continuously increasing cost of petroleum in association with their alarming pollution levels from diesel engines has led to an interest in finding alternative fuels to diesel. Emission control and engine efficiency are two of the most important parameters in current engine design. The impending introduction of emission standards such as Euro IV and Euro V has forced research towards developing new technologies for combating engine emissions. This paper examines the effects of compression ratio, swirl augmentation techniques and ethanol addition on the combustion of compressed natural gas (CNG) blended with Honge oil methyl esters (HOME) in a dual fuel engine. The present results show that the combustion of HOME and 15% ethanol blend with CNG induction in a dual-fuel engine operated in optimized parameters at an injection timing of 27° Before Top Dead Centre and a compression ratio of 17.5 resulted in acceptable combustion emissions and improved brake thermal efficiencies. The implementation of swirl augmentation techniques increased brake thermal efficiencies (BTEs) and considerably reduced combustion emissions such as smoke, HC, CO and NO_x. The addition of ethanol also increased BTEs. However, at more than 15% of ethanol in HOME, NO_x emissions increased dramatically.     

Yield and arsenate uptake of arbuscular mycorrhizal tomato colonized by Glomus mosseae BEG167 in As spiked soil under glasshouse conditions

A glasshouse pot experiment was conducted to study the effect of arbuscular mycorrhizal (AM) colonization by Glomus mosseae BEG167 on the yield and arsenate uptake of tomato plants in soil experimentally contaminated with five As levels (0, 25, 50, 75 and 150 mg kg(-1)). Mycorrhizal colonization (50-70% of root length) was little affected by As application and declined only in soil amended with 150 mg As kg(-1). Mycorrhizal colonization increased plant biomass at As application rates of 25, 50 and 75 mg kg(-1). Shoot As concentration increased with increasing As addition up to 50 mg kg(-1) but decreased with mycorrhizal colonization at As addition rates of 75 and 150 mg kg(-1). Shoot As uptake increased with mycorrhizal colonization at most As addition levels studied, but tended to decrease with addition of 150 mg As kg(-1). Total P uptake by mycorrhizal plants was elevated at As rates of 25, 50 and 75 mg kg(-1), and more P was allocated to the roots of mycorrhizal plants. Mycorrhizal plants had higher shoot and root P/As ratios at higher As application rates than did non-mycorrhizal controls. The soil of inoculated treatments had higher available As than uninoculated controls, and higher pH values at As addition levels of 25, 50 and 75 mg kg(-1). Mycorrhizal colonization may have increased plant resistance to potential As toxicity at the highest level of As contamination studied. Mycorrhizal tomato plants may have potential for phytoextraction of As from moderately contaminated soils or phytostabilization of more highly polluted sites.     

Immune responses,DNA damage and ultrastructural alterations of gills in the marine mussel Lithophaga lithophaga exposed to CuO nanoparticles

Environmental Science and Pollution Research - Nanoparticle (NP) pollution is a worldwide problem. Copper oxide nanoparticles (CuO NPs) are one of the most used NPs in a variety of applications,...     

Effects of UV-modified biochar derived from phytoremediation residue on Cd bioavailability and uptake in Coriandrum sativum L. in a Cd-contaminated soil

Environmental Science and Pollution Research - Biochar has been applied widely as an amendment in the remediation of contaminated soil to immobilize the heavy metals. However, the role of...