Modeling assessment for ammonium nitrogen recovery from wastewater by chemical precipitation

Chemical precipitation to form magnesium ammonium phosphate (MAP) is an effective technology for recovering ammonium nitrogen (NH4 +-N). In the present research, we investigated the thermodynamic modeling of the PHREEQC program for NH4 +-N recovery to evaluate the effect of reaction factors on MAP precipitation. The case study of NH4 +-N recovery from coking wastewater was conducted to provide a comparison. Response surface methodology (RSM) was applied to assist in understanding the relative significance of reaction factors and the interactive effects of solution conditions. Thermodynamic modeling indicated that the saturation index (SI) of MAP followed a polynomial function of pH. The SI of MAP increased logarithmically with the Mg2+/NH4 + molar ratio (Mg/N) and the initial NH4 +-N concentration (CN), respectively, while it decreased with an increase in Ca2+/NH4 + and CO3 2??/NH4 + molar ratios (Ca/N and CO3 2??/N), respectively. The trends for NH4 +-N removal at different pH and Mg/N levels were similar to the thermodynamic modeling predictions. The RSM analysis indicated that the factors including pH, Mg/N, CN, Ca/N, (Mg/N) (CO3 2??/N), (pH)2, (Mg/N)2, and (CN)2 were significant. Response surface plots were useful for understanding the interaction effects on NH4 +-N recovery.     

小型燃煤工业锅炉NO_x形成与释放规律模拟研究

NOx是我国十二五期间重点控制的污染物,燃煤工业锅炉是其重要来源。为了研究燃煤工业锅炉NOx的形成与释放规律,在实验室模拟了不同煤种的燃烧过程。采用原煤/焦炭燃烧法分别研究挥发分氮和焦炭氮生成NOx的反应,探讨燃料型NOx的形成与释放规律,并解释试验模拟条件下燃煤NOx产污系数和现场实测值的差异。结果表明,试验中烟煤、无烟煤、煤焦的NO转化率平均值分别为25.77%,22.17%和11.98%,产污系数平均值分别为4.31,5.08和2.00kg/t,高于现场实测结果核算值。燃煤工业锅炉NOx以燃料型为主,燃料型NOx的形成和释放是一个复杂的多相反应过程,由挥发分氮的氧化还原反应和焦炭氮的氧化还原反应组成,煤种、温度、空气流量、粒径、氧含量等因素对4种反应各自影响及影响程度并不相同。     

稀释接种法测BOD5考核样品的一些注意点

用稀释接种法测定BOD5时,由于操作繁琐,全部实验时间需要5d,任一环节出现问题都会影响实验结果。在进行考核实验时,由于时间紧,样品量有限,因此每个实验操作步骤都要谨慎仔细。通过实践经验,就BOD,考核实验总结了一些注意点。     

浅谈热泵技术在兖矿集团的应用

通过对兖矿集团所属煤矿供暖小区的现状以及能耗进行调查、分析,本文就如何采用先进的热泵技术,对矿区燃煤小锅炉进行节能技术改造展开探讨,对类似节能改造有较高借鉴作用。     

胞外聚合物磷酸盐形态对生物除磷过程的影响研究

以不同DO条件下污泥龄(SRT)分别为10 d和30 d的两组实验室A/O-SBR反应器活性污泥为研究对象,探讨了胞外聚合物(EPS)磷酸盐形态对生物除磷过程的影响.结果表明,污泥絮体中的磷主要分布于EPS中,PO3-4-P和聚磷酸盐(Poly-P,包括低分子量聚磷酸盐LMW PolyP和高分子量聚磷酸盐HMW Poly-P)是EPS磷的主要形态;EPS对生物除磷的影响明显大于细菌细胞,EPS磷的厌氧降低量和好氧升高量为胞内磷变化量的2.8~6.4倍.EPS中的LMW Poly-P和HMW Poly-P含量均表现厌氧降低和好氧升高的变化规律;对于相同SRT的污泥,中DO(2.5~3.5 mg·L-1)条件较低DO(0.7~1.0 mg·L-1)条件下EPS的LMW Poly-P和HMW Poly-P有更大的厌氧降低量和好氧升高量,对应着更明显的生物除磷过程,说明EPS不仅是生物除磷过程的中转站,而且参与了生物聚磷过程.     

滹沱河冲洪积扇地下水中酞酸酯的污染现状与分布特征

2014年9月采集石家庄地区滹沱河冲洪积扇地下水水样,采用气相色谱-质谱法测定了US EPA优先控制的6种酞酸酯(PAEs),对PAEs分布特征与风险进行了分析.结果表明,研究区内51个点位仅1个点位未检出PAEs,检出的ΣPAEs范围为nd~28 873.1 ng·L~(-1),与国内其他研究区相比,研究区地下水中PAEs污染水平较重.PAEs及各组分的空间分布存在显著差异.3个地下水单元PAEs的平均污染水平总体表现为山间沟谷河谷裂隙孔隙水单元(G1)滹沱河冲洪积扇扇顶部孔隙水单元(G2)滹沱河冲洪积扇扇中部孔隙水单元(G3).在G2、G3单元共计39个点位中,有23个点位地下水中的PAEs以邻苯二甲酸甲酯(DMP)为主,而其余点位均因临近周边污染源,地下水中PAEs含量较高,且以邻苯二甲酸(2-乙基己基)酯(DEHP)、邻苯二甲酸丁酯(DBP)为主.研究区人群饮用受PAEs污染地下水的总非致癌风险指数和总致癌风险指数范围分别为7.6×10-9~1.1×10-2、nd~1.2×10-6,均小于US EPA推荐的可接受的水平,风险较小.     

生活垃圾源头沥水的减量提质效应研究

针对我国生活垃圾厨余组分含量高、含水率高和热值低的特点,提出以降低厨余组分含水率为主要手段,实现生活垃圾源头减量和提质为主要目标的源头沥水和选择性分质收集模式.在苏州市两个居民小区进行了为期10个月的项目试点,监测结果显示,居民家庭采取源头沥水措施后,生活垃圾产生量减少6.47%,含水率降低2.23%,低位热值提高10.94%.生活垃圾源头沥水的减量提质效应良好,有助于提高后续焚烧及填埋处理设施运行效率和二次污染控制水平,降低运输及处理成本.     

达里诺尔湖近2400年以来Hg元素含量变化及环境意义

汞（Hg）元素作为一种全球性循环元素,对环境的影响正逐渐成为人们关注的焦点之一.为揭示寒旱区达里诺尔湖沉积物的Hg污染历史及人类活动对湖泊沉积物中Hg污染的影响,通过采集湖泊沉积物岩芯（编号DL1）,在建立DL1岩芯沉积地层年代框架的基础上,结合沉积物粒度特征、总有机质（TOC）含量等指标参数的变化,对DL1岩芯记录的地质历史上的Hg含量变化特征及环境意义进行了综合分析.结果显示,沉积物记录的Hg元素污染具有明显的阶段性变化特征：2400~1400 cal.a BP,Hg含量呈逐渐降低趋势,期间降水量呈逐步减少趋势,区域气候显著干旱;1400~200 cal.a BP,Hg含量相对稳定,呈小幅度波动变化,对应了区域气候的干-湿交替;近200 cal.a BP以来,Hg含量明显增加,这可能是受人类活动影响的结果.整体上,地质历史上DL1沉积物中Hg含量变化受气候干冷-暖湿交替周期性变化影响较大.而近200 cal.a BP来Hg与TOC等指标间显著正相关,则显示了沉积物中有机质可能吸附了大量的Hg元素,使其呈顶端富集趋势,进而对湖泊水生态环境造成影响.     

液晶显示器液晶处理与铟回收技术

在实验室条件下,对液晶显示器回收的各个重要环节作了初步的探索,提出了一整套回收工艺.其中包括利用丙酮常温浸取去除偏光片、分离玻璃基板、溶解液晶,还包括利用硫酸溶液和二氧化锰联合浸取玻璃基板,铟的浸取率达89%.得到的铟的酸液经过萃取、置换和电解,可以得到铟的产品,为液晶显示器的资源化和无害化提供实验数据和技术支持.     

The concentrations and distribution of polycyclic musks in a typical cosmetic plant

Polycyclic musks [cashmeran (DPMI), celestolide (ADBI), phantolide (AHMI), traseolide (ATII), tonalide (AHTN) and galaxolide (HHCB)] in the air, wastewater, sludge samples of a typical cosmetic plant were analyzed. DPMI, ADBI, HHCB and AHTN were found in all samples, and ATII was not found in any sample. HHCB and AHTN were the major components in all samples. The polycyclic musk concentrations were very high in the air of the cosmetic plant, and polycyclic musks were mostly contained in the gas phase at the percentage of 86.35-97.70%. Average polycyclic musk concentrations in effluent were high, and ranged from 0.62 to 32.06 microgl-1. The removal efficiency during the active sludge wastewater treatment was also high, resulting from the adsorption of those compounds into the sludge. So the polycyclic musk concentrations were very high in the primary sludge and second sludge, and ranged from 1.78 to 92.45 mgkg-1 (dry), and from 2.87 to 65.67 mgkg-1 (dry), respectively. Results suggested that the sludge needed to be further treated to make polycyclic musks less influence to the environment.