Analyzing the hydrologic effects of region-wide land and water development interventions: a case study of the Upper Blue Nile basin

In the drylands of the Upper Blue Nile basin, high climate variability and land degradation are rampant. To enhance adaptive capacity in the region, various soil and water conservation interventions have been implemented. Moreover, water resources development schemes such as the Grand Ethiopian Renaissance Dam should be implemented by 2025. We modeled the effects of these interventions on surface runoff in the basin for both current and future (2025) basin conditions, using the runoff coefficient method in a spatially explicit approach. Under current conditions, we observed high spatial variability of mean annual runoff. The northeastern Blue Nile-1 sub-basin produces the highest mean annual runoff (391 mm or 10 × 10⁹ m³), whereas the northwestern Blue Nile-2 sub-basin produces the lowest mean annual runoff (178 mm or 0.2 × 10⁹ m³). The basin generates a total annual runoff volume of 47.7 × 10⁹ m³, of which about 54 % comes from cultivated land. The strong association between land use and topography masked the direct effect of rainfall on runoff. By 2025, total annual runoff yield could decrease by up to 38 % if appropriate basin-wide soil and water conservation interventions and the Grand Ethiopian Renaissance Dam are implemented. However, the full effects of most physical structures will only last for 1 or 2 years without regular maintenance. The improved understanding of the dynamics of the Upper Blue Nile basin’s hydrology provided by the present study will help planners to design appropriate management scenarios. Developing the basin’s database remains important for a holistic understanding of the impacts of future development interventions.     

Synthesis of novel polymer type sulfoxide solid phase combined with the porogen imprinting for enabling selective separation of polychlorinated biphenyls

We developed a novel polymer type sulfoxide-modified solid phase enabling to achieve selective separation of polychlorinated biphenyls (PCBs) from insulation oil. In this study, firstly we prepared base-polymer based on the concept of the molecular imprinting to capture PCBs in selectively, then, the sulfoxide groups were modified on the pore surface of base-polymers by changing preparation methods. As results of liquid chromatographic analyses for the polymers as columns, the base-polymer prepared by xylene as a porogenic solvent showed selective retention ability for chlorinated aromatic compounds by the porogen imprinting effect. Additionally, the polymer-type sulfoxide solid phases showed highly retention ability for PCBs by increasing amount of introduced sulfoxide groups. Consequently, the results of separation of PCBs comparing to insulation oil suggested that the prepared solid phase can be used for the selective separation of PCBs at the same level as a commercially available media utilized for the regulated method.     

Female-biased sex allocation of offspring by an <Emphasis Type="Italic">Apodemus</Emphasis> mouse in an unstable environment

We investigated the effects of population fluctuation on the offspring’s sex allocation by a weakly polygynous mouse, Apodemus argenteus, for 3 years. In acorn-poor seasons, heavier mothers invested more in sons, and lighter mothers invested more in daughters. In acorn-rich seasons, heavier mothers invested more in daughters, and lighter mothers invested more in sons. Maternal body condition and litter size affected the sex allocation. Furthermore, there was a maternal investment trade-off between a son’s birth mass and the number of daughters. Based upon the effect of population fluctuation on the lifetime reproductive success of each sex, we proposed the new “safe bet hypothesis”. This hypothesis predicts that frequent and unpredictable change in female distribution, which is often caused by abrupt fall in food condition, favors female-biased maternal investment to offspring by polygynous mammals and is applicable to many small mammals inhabiting in unstable environments.     

An overlooked side effect of nest-scattering behavior to decrease predation risk (Acari: Tetranychidae,Stigmaeidae)

The number of nests containing egg masses a female makes over her lifetime and the pattern of scattering nests vary among species in a genus of nest-weaving spider mites (Stigmaeopsis). We hypothesized that the scattered nests of small nest builders have a previously overlooked indirect effect in that the void nests created after predation take on a new role as hindering devices that effectively decrease predator searching efficiency. First, we demonstrated that the experimental design used in this study is a good reflection of the nest distribution pattern of Stigmaeopsis takahashii (an intermediate-sized nest builder) in the field. Using this species as a model, we tested how different nest-scattering patterns affect the predator to examine how scattering may indirectly provide an anti-predation strategy by increasing a predators searching time. Next, we observed how artificially arranged void nests disturb predatory behavior in both starved and fully fed predator females and showed that void nests have a strong hindering effect on predators. Thus, we concluded that the nesting behavior of this mite species not only has anti-predator effects but must also have a stabilizing effect on predator–prey interaction systems at the population level.     

Hydrogen sulfide removal by iron containing activated carbon

Activated carbon modified by impregnation with iron (III) chloride solution (Fe‐ACs) were studied to try to raise their adsorption capacity for hydrogen sulfide, a malodorous substance.

The surface area and pore volume of activated carbon were decreased by impregnation, but the amount of hydrogen sulfide adsorbed onto Fe‐AC was larger than that onto raw activated carbon (R‐AC). In particular, a large increase of the amount adsorbed onto Fe‐AC was noted at low equilibrium pressure. It was assumed that the increase of amount of hydrogen sulfide adsorbed onto Fe‐AC was due to the chemical interaction between iron (III) chloride on the pores in addition to the physical adsorption onto pores of activated carbon. Fe‐AC shows a high selectivity for hydrogen sulfide.     

Environmental impact assessment of sprayed-on asbestos in buildings

This study evaluated the environmental impacts of sprayed-on asbestos, which had been used as insulation material in buildings, from multiple perspectives, mainly at the disposal stage. The health risks from asbestos emission and energy consumption were estimated. Two disposal scenarios were assumed for the asbestos: melting for reduced-risk disposal and ordinary packaging/landfilling. We estimated the asbestos emission and health risk in the case of packaging/landfilling, assuming uncontrolled management of the landfill site. A difficulty with introducing health-risk concepts into life cycle assessment (LCA) is the pulse–flux problem, which is discussed in the light of these estimations. In order to solve this problem, we proposed a method using a conversion factor representing exposure-dose/emission, and showed that emission could be converted into health risk. We also estimated the energy consumption for melting asbestos in the disposal stage, which can decrease the health risk. If we consider the energy consumption for the life cycle of asbestos, only a little energy is required for melting, compared with the large amount of energy saved in the use stage owing to the insulating effect of the asbestos. The trade-off relationship between health risk and energy consumption for the disposal scenarios indicated the need for weighting methods to handle trade-offs such as this. Received: July 2, 1998 / Accepted: December 20, 1999     

Differences in the Spatial Variability Among CO2, CH4, and N2O Gas Fluxes from an Urban Forest Soil in Japan

The spatial variability of carbon dioxide (CO₂), methane (CH₄), and nitrous oxide (N₂O) fluxes from forest soil with high nitrogen (N) deposition was investigated at a rolling hill region in Japan. Gas fluxes were measured on July 25th and December 5th, 2008 at 100 points within a 100 × 100 m grid. Slope direction and position influenced soil characteristics and site-specific emissions were found. The CO₂ flux showed no topological difference in July, but was significantly lower in December for north-slope with coniferous trees. Spatial dependency of CH₄ fluxes was stronger than that of CO₂ or N₂O and showed a significantly higher uptake in hill top, and emissions in the valley indicating strong influence of water status. N₂O fluxes showed no spatial dependency and exhibited high hot spots at different topology in July and December. The high N deposition led to high N₂O fluxes and emphasized the spatial variability.     

Hydrolysis of <Emphasis Type="Italic">Sasa senanensis</Emphasis> culm with dilute sulfuric acid for production of a fermentable substrate

To prepare a substrate for microbial conversion of xylose into xylitol, the culm of Sasa senanensis was hydrolyzed with dilute sulfuric acid. When the reaction temperature was fixed at 121°C, an optimum yield of xylose was obtained by treatment with 2% sulfuric acid for 1 h. An increase in the sulfuric acid concentration or a prolonged reaction time resulted in a decrease in the xylose yield. A fermentable substrate with a relatively high xylose concentration (36.7 g l⁻¹) was obtained by hydrolysis with 2% sulfuric acid with a liquid-to-solid ratio of 5 g g⁻¹. During hydrolysis at elevated temperatures, certain undesired byproducts were also generated, such as degradation products of solubilized sugars and lignin, which are potential inhibitors of microbial metabolism. These compounds were, however, successfully removed from the hydrolysate by treatment with activated char.     

Material flow analysis of used personal computers in Japan

Most personal computers (PCs) are discarded by consumers after the data files have been moved to a new PC. Therefore, a used PC collection scheme should be created that does not depend on the distribution route of new PCs. In Japan, manufacturers’ voluntary take-back recycling schemes were established in 2001 (for business PCs) and 2003 (for household PCs). At the same time, the export of used PCs from Japan increased, affecting the domestic PC reuse market. These regulatory and economic conditions would have changed the flow of used PCs.In this paper, we developed a method of minimizing the errors in estimating the material flow of used PCs. The method’s features include utilization of both input and output flow data and elimination of subjective estimation as much as possible. Flow rate data from existing surveys were used for estimating the flow of used PCs in Japan for fiscal years (FY) 2000, 2001, and 2004. The results show that 3.92 million and 4.88 million used PCs were discarded in FY 2000 and 2001, respectively. Approximately two-thirds of the discarded PCs were disposed of or recycled within the country, one-fourth was reused within the country, and 8% were exported. In FY 2004, 7.47 million used PCs were discarded. The ratio of domestic disposal and recycling decreased to 37% in FY 2004, whereas the domestic reuse and export ratios increased to 37% and 26%, respectively. Flows from businesses to retailers in FY 2004 increased dramatically, which led to increased domestic reuse. An increase in the flow of used PCs from lease and rental companies to secondhand shops has led to increased exports. Results of interviews with members of PC reuse companies were and trade statistics were used to verify the results of our estimation of domestic reuse and export of used PCs.