Effects of residual antibiotics in groundwater on Salmonella typhimurium: changes in antibiotic resistance, in vivo and in vitro pathogenicity

An outbreak-causing strain of Salmonella enterica serovar Typhimurium was exposed to groundwater with residual antibiotics for up to four weeks. Representative concentrations (0.05, 1, and 100 μg L(-1)) of amoxicillin, tetracycline, and a mixture of several other antibiotics (1 μg L(-1) each) were spiked into artificially prepared groundwater (AGW). Antibiotic susceptibility analysis and the virulence response of stressed Salmonella were determined on a weekly basis by using human epithelial cells (HEp2) and soil nematodes (C. elegans). Results have shown that Salmonella typhimurium remains viable for long periods of exposure to antibiotic-supplemented groundwater; however, they failed to cultivate as an indication of a viable but nonculturable state. Prolonged antibiotics exposure did not induce any changes in the antibiotic susceptibility profile of the S. typhimurium strain used in this study. S. typhimurium exposed to 0.05 and 1 μg L(-1) amoxicillin, and 1 μg L(-1) tetracycline showed hyper-virulent profiles in both in vitro and in vivo virulence assays with the HEp2 cells and C. elegans respectively, most evident following 2nd and 3rd weeks of exposure.     

Light and carbon balance in the seagrass Thalassia testudinum : evaluation of current production models

The production dynamics and carbon balance of Thalassia testudinum in the lower Laguna Madre, Texas, USA, were examined during the 1995 summer period based on in situ photosynthesis vs irradiance (PI) measurements and continuous measurements of underwater photon-flux density (PFD). The validity of applying the H _sat model, used to calculate production for Zostera marina as the product of the maximum rate of photosynthesis (P _max) and daily hours of saturating irradiance (H _sat) was assessed for T. testudinum by comparison with integrated production estimates derived through numerical integration. Gross integrated production values were combined with dark-respiration measurements of photosynthetic (PS) and non-photosynthetic (NPS) tissues and areal biomass to generate daily whole-plant carbon balance. Production and whole-plant carbon balance are discussed in relation to surface and underwater PFD measurements, biomass and other physical and chemical parameters collected during a 1 yr period from January to December 1995. The H _sat model significantly underestimated production during all summer months, averaging 70% of integrated production over the entire study period. Gross integrated production ranged between 11.5 mg C g⁻¹ leaf dry wt d⁻¹ in June (during a period of unseasonably low PFDs caused by a drift-alga mat covering the seagrass bed) to 26.7 mg C g⁻¹ leaf dry wt d⁻¹ in July. Modeled net carbon gain was highest in July at 454 mg C m⁻² d⁻¹ (1.4 g dry wt m⁻² d⁻¹), sufficient to account for measured rates of leaf production in the study area and representative of T. testudinum populations of low productivity. During part of the summer period, however, the population was in negative carbon balance. The relatively low productivity of this population and the periods of negative carbon balance are attributed to low net photosynthesis:dark respiration (P _net:R _d) ratios, sporadic low-light periods, the small fraction of PS tissue relative to whole-plant biomass (5 to 13%) and nutrient limitation. Production models are sensitive to both light availability and the proportion of PS tissue supporting NPS biomass as reflected in whole-plant P _net:R _d ratios. Received: 13 August 1997 / Accepted: 6 March 1998     

Trace Metal Contents (Al, Cu and Zn) of Tea: Tea and Soil from Two Tea Plantations, and Tea Products from Different Provinces of China

The present project aims to investigate the possible contamination of teas with the trace metals: Al, Cu and Zn. Tea bushes sampled from two tea plantations in the northern part of Guangdong Province accumulated higher concentrations of Cu and Zn in young leaves, and of Al in old leaves. The analysis of the three metals in tea produced in different provinces indicated higher Al levels in those obtained from Guangdong and Yunnan Provinces, which may be due to the lower soil pH in these areas. Green tea had the lowest Al concentration among the four types of tea studied, as only the bud and two young leaves are used, whereas older leaves are used for other types of tea (black, Oolong and Puerh tea). The transfer of Al, Cu and Zn from soil to different parts of tea bushes was low in general, except for Zn at Lechang tea plantation which next to a Pb/Zn mine, where a higher transfer was observed from young leaves to tea products, indicating possible metal contamination during tea processing. However, low concentrations of Cu and Zn (less than 0.07 mg Cu L^-1 and 0.17 mg Zn L^-1), and moderate amounts of Al (2.1-2.5 mg L^-1) were obtained in the tea liquor (1% hot water extracts).     

Effects of suburban land use on phosphorus fractions and speciation in the Upper Peruque Creek, Eastern Missouri

This field study was conducted to explore the spatial and seasonal changes in total phosphorus and fraction distribution in relation to land uses. Water samples were collected biweekly at four sampling locations, which represented different potential phosphorus sources along the Upper Peruque Creek in Eastern Missouri. Total phosphorus concentrations of > 0.8 mg/L appeared sporadically at site 2, downstream of a small community, with an average of 0.82 +/- 0.14 mg/L in fall. Particulate phosphorus accounted for approximately 80% of total phosphorus at all sampling sites, except for site 2, where approximately 50 to 75% of dissolved phosphorus was often observed. Approximately 71 and 85% of total phosphorus in the sediment was in the form of iron (III) phosphate at the headwaters and downstream sites, respectively; 29 and 15% was in the form of phytic acid at the two sites. Land uses affect the total phosphorus concentration and alternate phosphorus fraction and speciation in the creek.     

Effects of a zeolite-selective catalytic reduction system on comprehensive emissions from a heavy-duty diesel engine

The effects of a zeolite urea-selective catalytic reduction (SCR) aftertreatment system on a comprehensive spectrum of chemical species from diesel engine emissions were investigated in this study. Representative samples were collected with a newly developed source dilution sampling system after an aging process designed to simulate atmospheric dilution and cooling conditions. Samples were analyzed with established procedures and compared between the measurements taken from a baseline heavy-duty diesel engine and also from the same engine equipped with the exhaust aftertreatment system. The results have shown significant reductions for nitrogen oxides (NOx), carbon monoxide, total hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), and organic carbon (OC) emissions. Additionally, less significant yet notable reductions were observed for particulate matter mass and metals emissions. Furthermore, the production of new species was not observed with the addition of the zeolite urea-SCR system joined with a downstream oxidation catalyst.     

The ozone productivity of n-propyl bromide: Part 2--An exception to the Maximum Incremental Reactivity Scale

In an earlier paper the ozone-forming potential of n-propyl bromide (NPB) was studied with a new methodology designed to address issues associated with a marginal smog-forming compound. However, the U.S. Environmental Protection Agency (EPA) subsequently revised its policy and now recommends using the Maximum Incremental Reactivity (MIR) scale to rank the ozone-forming potential of all volatile organic compounds (VOCs), including those of marginal ozone productivity. Nevertheless, EPA contemplated exceptions to the box-model-derived MIR scale by allowing use of photochemical grid-model simulations for case specific reactivity assessments. The California Air Resources Board (CARB) also uses the MIR scale and CARB has a Reactivity Scientific Advisory Committee that can consider exceptions to the MIR scale. In this study, grid-model simulations that were recommended by EPA are used to evaluate the incremental ozone impacts of NPB using an update to the chemical mechanism developed in an earlier paper. New methods of analysis of the grid-model output are further developed here to quantify the relative reactivities between NPB and ethane over a wide range of conditions. The new grid-model-based analyses show that NPB is significantly different and generally less in ozone-forming potential (i.e., reactivity) than predicted by the box-model-based MIR scale relative to ethane, EPA's "bright-line" test for non-VOC status. Although NPB has low reactivity compared to typical VOCs on any scale, the new grid-model analyses developed here show that NPB is far less reactive (and even has negative reactivity) compared to the reactivity predicted by the MIR scale.     

Relationship between atmospheric pollution processes and synoptic pressure patterns in northern China

The air pollution index (API) sequences in 10 cities in northern China and the synoptic pressure patterns during autumn and winter from 2002 to 2006 were analyzed with diagnostic and statistical methods. The results showed that the air qualities in northern China had a prominent correlation with the pressure systems. It revealed that (a) the increasing phase of API was associated with high pressure and the successive low pressure, (b) the preceding part of front (i.e. the retral part of low pressure) was associated with the maximum of API values during a cycle of air pollution process, (c) the pressure systems with high gradient led to the decrease of API, and (d) the synoptic pressure patterns and their evolvements were the main causes of regional air pollution processes. These relations can be used to analyze the variation characteristics and mechanism of regional atmosphere pollution process, and provide important basis for the qualitative prediction, control, and management of regional air pollution problems.     

Characterization of subsoil heterogeneity, estimation of grain size distribution and hydraulic conductivity at the Krauthausen test site using Cone Penetration Test

A Cone Penetration Test (CPT) survey with a high spatial resolution was performed in order to investigate the stratigraphy as well as the spatial variability of various soil properties of the Krauthausen test site. Analyses of the CPT measurements showed the subsurface to be dominated by a planar layered structure. Variogram analysis of the various CPT parameters disclosed that within each layer the soil properties have an anisotropic spatial correlation structure. A correlation analysis of the measured CPT data and co-located grain size distributions from soil samples was performed. Since the correlation coefficients were greater equal to 0.7, a reliable empirical relationship between the data sets could be developed. Based on this empirical relationship grain size distributions were estimated at CPT locations. The statistical processing of estimated and measured grain size distributions with respect to their spatial correlation structure disclosed good agreement between the data sets. The estimated grain size distributions from CPT data were used to estimate the hydraulic conductivity in the aquifer. The results provide detailed information of the spatial heterogeneity of the hydraulic conductivity at Krauthausen test site. The validation of these results, using a prior investigation of hydraulic conductivity statistics, suggests the CPT a fast and inexpensive tool for the estimation of three dimensional hydraulic conductivity fields with sufficient accuracy.     

Kinetic adsorption of application of carbon nanotubes for Pb（II） removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(II) was reach to maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coefficients from Langmuir isotherm model indicates the strong adsorptions of Pb(II) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). From this study, the results indicates that the highest percentage removal of Pb (96.03%) can be achieved at pH 5, 40 mg/L of CNTs, contact time 80 min, and agitation speed 50 r/min.