Synergy Between Visual and Auditory Signals and Its Influence on the Follow-Up Regulation Quality

The study aimed at verifying a hypothesis that supporting a visual signal of regulation deviation with an auditory one could improve the quality of regulation; the operator would have better information on machine operation. A special simulator was applied to follow-up tracking with a manual lever which controlled vertical movements of a cursor on a monitor screen. Simultaneously with visual information on screen, the operator was provided with an auditory deviation signal of pre-determined characteristics. 33 young males underwent the test. It was found that supporting a visual signal with an auditory one resulted in an improvement in the regulation quality by 5-6%, which proved synergy between those signals. The results may be used in designing tele- and servo-mechanisms, especially for remote control machinery, e.g., inspection robots or micromanipulators controlled by operators in a follow-up system.     

Experimental investigation of spark ignition energy in kerosene,hexane, and hydrogen

Quantifying the risk of accidental ignition of flammable mixtures is extremely important in industry and aviation safety. The concept of a minimum ignition energy (MIE), obtained using a capacitive spark discharge ignition source, has traditionally formed the basis for determining the hazard posed by fuels. While extensive tabulations of historical MIE data exist, there has been little work done on ignition of realistic industrial and aviation fuels, such as gasoline or kerosene. In the current work, spark ignition tests are performed in a gaseous kerosene–air mixture with a liquid fuel temperature of 60 °C and a fixed spark gap of 3.3 mm. The required ignition energy was examined, and a range of spark energies over which there is a probability of ignition is identified and compared with previous test results in Jet A (aviation kerosene). The kerosene results are also compared with ignition test results obtained in previous work for traditional hydrogen-based surrogate mixtures used in safety testing as well as two hexane–air mixtures. Additionally, the statistical nature of spark ignition is discussed.     

Assessment of an accidental vapour cloud explosion: Lessons from the Indian Oil Corporation Ltd. accident at Jaipur,India

On 29 October 2009, at 19:30 IST, a devastating vapour cloud explosion occurred in a large fuel storage area at the Indian Oil Corporation (IOC) Depot in Jaipur, India, generating significant blast pressure. As a consequence of this explosion, the entire installation was destroyed, buildings in the immediate vicinity were heavily damaged, and windowpane breakages were found up to 2 km from the terminal. The IOC estimated that the total loss from the fire and explosion was approximately INR 2800 million.Ironically, as a storage site, the Jaipur terminal was not highly congested, and thus was not considered to have adequate potential for a vapour cloud explosion (VCE). Nevertheless, the prima facie evidences indicate that this was a case of VCE. Therefore, the main objective of this study is to quantify the potential overpressures due to vapour cloud explosions (VCEs) using the Process Hazard Analysis DNV Norway based PHAST 6.51 Software. The results are validated by the extent of the damage that had occurred. The estimation of the VCE shows that a maximum 1.0 bar overpressure was generated in the surrounding area. The initial assessment of the accident data roughly estimates the release mode, time, and amount of vaporized fuel. A more accurate estimate has been obtained by modelling the dispersion of vapour clouds in the surrounding atmosphere, which reveals trends and relationships for the occurrence of vapour cloud explosions.     

A new approach for layout optimization in maintenance workshops with safety factors: The case of a gas transmission unit

In this study, an Integrated Simulation-Data Envelopment Analysis (DEA) approach is presented for optimum facility layout of maintenance workshop in a gas transmission unit. The process of repair of incoming parts includes various operations on different facilities. The layout problem in this system involves determining the optimum location of all maintenance shop facilities. Layout optimization plays a crucial role in this type of problems in terms of increasing the efficiency of main production line. Standard types of layouts including U, S, W, Z and straight lines are considered. First, the maintenance workshop is modeled with discrete-event-simulation. Time in system, average waiting time, average machine utilization, average availability of facilities, average queue length of facilities (AL) and average operator utilization are obtained from simulation as key performance indicators (KPIs) of DEA. Also, safety index and number of operators are considered as other KPIs. Finally, a unified non-radial Data Envelopment Analysis (DEA) is presented with respect to the stated KPIs to rank all layouts alternatives and to identify the best configuration. Principle Component Analysis (PCA) is used to validate and verify the results. Previous studies do not consider safety factor in layout design problems. This is the first study that presents an integrated approach for identification of optimum layout in a maintenance workshop of gas transmission unit by incorporating safety and conventional factors.     

RAPID-N: Rapid natech risk assessment and mapping framework

Natech accidents at industrial plants are an emerging risk with possibly serious consequences. For the mitigation of natech risk, authorities need to identify natech prone areas in a systematic manner. In order to facilitate probabilistic natech risk mapping, a unified methodology was developed that is based on the estimation of on-site natural hazard parameters, determination of damage probabilities of plant units, and assessment of probability and severity of possibly triggered natech events. The methodology was implemented as an on-line, extensible risk assessment and mapping software framework called RAPID-N, which allows rapid local and regional natech risk assessment and mapping with minimal data input. RAPID-N features an innovative data estimation framework to complete missing input data, such as on-site natural hazard parameters and plant unit characteristics. The framework is also used for damage assessment and natech consequence analysis, and allows easy modification of input parameters, dynamic generation of consequence models according to data availability, and extension of models by adding new equations or substituting existing ones with alternatives. Results are presented as summary reports and interactive risk maps, which can be used for land-use and emergency planning purposes by using scenario hazards, or for rapid natech consequence assessment following actual disasters. As proof of concept, the framework provides a custom implementation of the U.S. EPA's RMP Guidance for Offsite Consequence Analysis methodology to perform natech consequence analysis and includes comprehensive data for earthquakes. It is readily extendible to other natural hazards and more comprehensive risk assessment methods.     

A new integrated treatment for the reduction of organic and nitrogen loads in methanogenic landfill leachates

Because of their high organic and nitrogen loads and the presence of toxic and phytotoxic compounds, methanogenic landfill leachates are not easily biodegradable; therefore, direct biological treatment of these wastewaters in conventional treatment plants is not recommended.In the present paper, we report the results of an experimental investigation conducted with the aim of defining an innovative integrated process that is low in cost and easily manageable and that is able to substantially improve the characteristics of methanogenic leachates.Thus, an initial oxidation process was developed using hydrogen peroxide without a catalyst, which, operating under ambient conditions, reduces the phytotoxic compound content to 10% of the initial level, reduces the COD (chemical oxygen demand) content by 50% and increases the rapidly biodegradable substrate content by 50%. Next, nitrogen removal is accomplished by means of struvite precipitation using seawater bittern and bone meal as sources of magnesium and phosphorus, respectively, with this process, abatements were reached of approximately 90% of the ammonia nitrogen, which was recovered as struvite powder.     

Experimental and theoretical investigations for mitigating NaAlH4 reactivity risks during postulated accident scenarios involving exposure to air or water

Experimental and theoretical studies were conducted to investigate the pyrophoricity and water-reactivity risks associated with employing sodium alanate (NaAlH₄) complex metal hydride in on-board vehicular hydrogen (H₂) storage systems. The ignition and explosivity of NaAlH₄ upon exposure to oxidizers in air or water were attributed to the spontaneous formation of stable hydroperoxyl intermediates on the NaAlH₄ surface and/or H₂ production, as well as the large driving force for NaAlH₄ conversion to favorable hydroxide products predicted by atomic and thermodynamic modeling. The major products from NaAlH₄ exposure to air: NaAl(OH)₄, gibbsite and bayerite Al(OH)₃, and Na₂CO₃ observed by XRD, were identified to be formed by surface-controlled reactions. The reactivity risks were significantly minimized, without compromising de-/re-hydrogenation cyclability, by compacting NaAlH₄ powder into wafers to reduce the available surface area. These core findings are of significance to risk mitigation and H₂ safety code and standard development for the safe use of NaAlH₄ for on-board H₂ storage in light-duty vehicles.     

地铁系统反恐应急预案编制指南研究

地铁系统已成为恐怖分子袭击的重要目标,为提高政府应对地铁系统突发恐怖袭击事件的应对和紧急处置能力,通过对我国各市地铁系统实际情况的调查和研究,根据对地铁典型恐怖袭击案例的剖析,详细阐述地铁系统反恐怖应急预案编制指南的思路、特点和重要作用,重点探讨对指南中的突发恐怖事件的分级分类和应急处置等方法,通过编制该指南的研究,为城市地铁系统反恐应急预案的编制提供指导性建议。     

Empirical Trials of Plant Field Guides

We designed 3 image‐based field guides to tropical forest plant species in Ghana, Grenada, and Cameroon and tested them with 1095 local residents and 20 botanists in the United Kingdom. We compared users’ identification accuracy with different image formats, including drawings, specimen photos, living plant photos, and paintings. We compared users’ accuracy with the guides to their accuracy with only their prior knowledge of the flora. We asked respondents to score each format for usability, beauty, and how much they would pay for it. Prior knowledge of plant names was generally low (<22%). With a few exceptions, identification accuracy did not differ significantly among image formats. In Cameroon, users identifying sterile Cola species achieved 46–56% accuracy across formats; identification was most accurate with living plant photos. Botanists in the United Kingdom accurately identified 82–93% of the same Cameroonian species; identification was most accurate with specimens. In Grenada, users accurately identified 74–82% of plants; drawings yielded significantly less accurate identifications than paintings and photos of living plants. In Ghana, users accurately identified 85% of plants. Digital color photos of living plants ranked high for beauty, usability, and what users would pay. Black and white drawings ranked low. Our results show the potential and limitations of the use of field guides and nonspecialists to identify plants, for example, in conservation applications. We recommend authors of plant field guides use the cheapest or easiest illustration format because image type had limited bearing on accuracy; match the type of illustration to the most likely use of the guide for slight improvements in accuracy; avoid black and white formats unless the audience is experienced at interpreting illustrations or keeping costs low is imperative; discourage false‐positive identifications, which were common; and encourage users to ask an expert or use a herbarium for groups that are difficult to identify. Pruebas Empíricas de Guías de Campo de Plantas Hawthorne, Cable & Marshall     

Characterizing the Width of Amphibian Movements During Postbreeding Migration

Habitat linkages can help maintain connectivity of animal populations in developed landscapes. However, the lack of empirical data on the width of lateral movements (i.e., the zigzagging of individuals as they move from one point to point another) makes determining the width of such linkages challenging. We used radiotracking data from wood frogs (Lithobates sylvaticus) and spotted salamanders (Ambystoma maculatum) in a managed forest in Maine (U.S.A.) to characterize movement patterns of populations and thus inform planning for the width of wildlife corridors. For each individual, we calculated the polar coordinates of all locations, estimated the vector sum of the polar coordinates, and measured the distance from each location to the vector sum. By fitting a Gaussian distribution over a histogram of these distances, we created a population‐level probability density function and estimated the 50th and 95th percentiles to determine the width of lateral movement as individuals progressed from the pond to upland habitat. For spotted salamanders 50% of lateral movements were ≤13 m wide and 95% of movements were ≤39 m wide. For wood frogs, 50% of lateral movements were ≤17 m wide and 95% of movements were ≤ 51 m wide. For both species, those individuals that traveled the farthest from the pond also displayed the greatest lateral movement. Our results serve as a foundation for spatially explicit conservation planning for pond‐breeding amphibians in areas undergoing development. Our technique can also be applied to movement data from other taxa to aid in designing habitat linkages. Caracterización de la Amplitud de Movimiento de Anfibios durante la Migración Pos‐Reproducción