Fate and removal of typical pharmaceutical and personal care products in a wastewater treatment plant from Beijing: a mass balance study

The fate and removal of pharmaceuticals and personal care products (PPCPs) in wastewater treatment plants (WWTPs) has received great attention during the last decade. Numerous data concerning concentrations in the water phase can be found in the literature, however corresponding data from sludge as well as associated mass balance calculations are very limited. In the present study, the adsorbed and dissolved concentrations of 9 PPCPs were investigated in each unit of a WWTP in Beijing, China. Based on the calculation of mass balance, the relative mass distribution and removal efficiency of each target compound was obtained at each process. The amount of PPCPs entering into the WWTP ranged from 12 g·d^–1 to 3848 g·d^–1. Five target compounds (caffeine, chloramphenicol, bezafibrate, clofibric acid, and N,N-diethyl-meta-toluamide) were effectively removed, with rates of 57%–100%. Negative removal efficiencies were obtained for sulpiride, metoprolol, nalidixic acid, and carbamazepine, ranging from -19% to -79%. PPCPs mainly existed in dissolved form (≥92%) in both the raw influent and the final effluent. The sludge cake carried a much lower amount of PPCPs (17 g·d^–1) compared with the discharged effluent (402 g·d^–1). In A²/O treatment tanks, the anaerobic and anoxic tanks showed good performance for PPCPs removal, and the amount of adsorbed PPCPs was increased. The results reveal that both the dissolved and the adsorbed phases should be considered when assessing the removal capacity of each A²/O tank.     

Activated carbons and amine-modified materials for carbon dioxide capture — a review

Rapidly increasing concentration of CO₂ in the atmosphere has drawn more and more attention in recent years, and adsorption has been considered as an effective technology for CO₂ capture from the anthropogenic sources. In this paper, the attractive adsorbents including activated carbons and amine-modified materials were mainly reviewed and discussed with particular attention on progress in the adsorbent preparation and CO₂ adsorption capacity. Carbon materials can be prepared from different precursors including fossil fuels, biomass and resins using the carbonization-activation or only activation process, and activated carbons prepared by KOH activation with high CO₂ adsorbed amount were reviewed in the preparation, adsorption capacity as well as the relationship between the pore characteristics and CO₂ adsorption. For the amine-modified materials, the physical impregnation and chemical graft of polyethylenimine (PEI) on the different porous materials were introduced in terms of preparation method and adsorption performance as well as their advantages and disadvantages for CO₂ adsorption. In the last section, the issues and prospect of solid adsorbents for CO₂ adsorption were summarized, and it is expected that this review will be helpful for the fundamental studies and industrial applications of activated carbons and amine-modified adsorbents for CO₂ capture.     

Removal of clofibric acid from aqueous solution by polyethylenimine-modified chitosan beads

Polyethylenimine （PEI）-modified chitosan was prepared and used to remove clofibric acid （CA） from aqueous solution. PEI was chemically grafted on the porous chitosan through a crosslinking reaction, and the effects of PEI concentration and reaction time in the preparation on the adsorption of clofibric acid were optimized. Scanning electron microscopy （SEM） showed that PEI macromolecules were uniformly grafted on the porous chitosan, and the analysis of pore size distribution indicated that more mesopores were formed due to the crosslinking of PEI molecules in the macropores of chitosan. The PEI-modified chitosan had fast adsorption for CA within the initial 5 h, while this adsorbent exhibited an adsorption capacity of 349 mg· g^-1 for CA at pH 5.0 according to the Langmuir fitting, higher than 213 mg· g^-1 on the porous chitosan. The CA adsorption on the PEI- modified chitosan was pH-dependent, and the maximum adsorption was achieved at pH 4.0. Based on the surface charge analysis and comparison of different pharmaceu- ticals adsorption, electrostatic interaction dominated the sorption of CA on the PEI-modified chitosan. The PEI- modified chitosan has a potential application for the removal of some anionic rnicropollutants from water or wastewater.     

Soil characteristics and their potential thresholds associated with <Emphasis Type="Italic">Scirpus mariqueter</Emphasis> distribution on a reclaimed wetland coast

We studied various soil characteristics associated with Scirpus mariqueter growth and spatial heterogeneity in the Shanghai Nanhui Dongtan wetlands. In September and October 2015, 12 soil characteristics (soil organic carbon, total phosphorus, total nitrogen, nitrate, nitrite, ammonia, orthophosphate, pH, moisture content, particle size, salinity, and tidal elevation) were analyzed from 101 soil samples. The key factors affecting S. mariqueter spatial distribution were determined using canonical correspondence analysis and curve-fitting analysis. Results showed that vegetation indices of height, cover, density, and biomass were positively correlated (P?<?0.05) with tidal flat elevation. S. mariqueter was mainly distributed at tidal flat elevations of 2.0–3.4 m. Plant coverage and density were positively correlated (P?<?0.05) with total nitrogen and soil salinity. Based on the curve-fitting and independent samples t-test analyses, thresholds of total nitrogen, conductivity, and tidal flat elevation of soil were 0.5475 g/kg, 0.8368 μS/cm, and 2.75 m, respectively. This study provides critical data for future coastal wetland remediation worldwide.     

道路灰尘铂族元素含量的短期变化过程分析

选择上海市区中山北路(华东师大～武夷路)、长宁路(中山西路～安西路)、杨柳青路(金沙江路～武宁路)等3条道路,对道路灰尘铂族元素(PGEs)含量的短期变化过程进行研究.结果表明,Rh的含量为24.95～36.24ng·g-1(平均值为29.42ng·g-1),Pd的含量为85.34～158.89ng·g-1(平均值为117.88ng·g-1),Pt含量为20.15～48.48ng·g-1(平均值为34.42ng·g-1).其中,道路灰尘Rh、Pd、Pt含量分别是参照点的19.48倍、12.17倍和64.94倍.与国际其他城市相比,Pt含量较低,Pd和Rh含量处于中间水平.总体而言,道路灰尘PGEs含量及负荷随时间变化呈上升趋势,到达上限后,变化则趋于和缓.在车流量恒定的情况下,PGEs浓度及负荷的短期变化主要归因于气象条件的变化.降雨会使PGEs浓度降低,但不同类型降雨会使PGEs负荷发生不同变化,雨量较大,则负荷降低;;雨量较小,负荷反而有升高可能;;连续降雨后,PGEs浓度与负荷达到下限.一定的风力扰动会使PGEs浓度升高,但使PGEs的负荷变化变得较为复杂;;连续干燥无风天气会使上述PGEs浓度及负荷达...     

鞍山地震应急救援体系建设的现状及建议

在总结鞍山地震应急工作经验的基础上,详细分析了鞍山市地震应急救援工作的成绩和不足之处,并对应急救援体系建设提出了几点建议.     

Rapid removal of bisphenol A on highly ordered mesoporous carbon

Bisphenol A (BPA) is of global concern due to its disruption of endocrine systems and ubiquity in the aquatic environment. It is important, therefore, that e orts are made to remove it from the aqueous phase. A novel adsorbent, mesoporous carbon CMK-3, prepared from hexagonal SBA-15 mesoporous silica was studied for BPA removal from aqueous phase, and compared with conventional powdered activated carbon (PAC). Characterization of CMK-3 by transmission electron microscopy (TEM), X-ray di raction, and nitrogen adsorption indicated that prepared CMK-3 had an ordered mesoporous structure with a high specific surface area of 920 m2/g and a pore-size of about 4.9 nm. The adsorption of BPA on CMK-3 followed a pseudo second-order kinetic model. The kinetic constant was 0.00049 g/(mg min), much higher than the adsorption of BPA on PAC. The adsorption isotherm fitted slightly better with the Freundlich model than the Langmuir model, and adsorption capacity decreased as temperature increased from 10 to 40°C. No significant influence of pH on adsorption was observed at pH 3 to 9; however, adsorption capacity decreased dramatically from pH 9 to 13.     

横向流除油器的研制及其在油田含油污水处理中的应用

研制开发出的新型横向流除油器具有独特性能,除油器的聚结区由相互正交的梯形板组所组成,水流在其中沿正弦波路流动;分离区由一系列单元六面体所组成的三维板构成,水流在其中沿水平方向流动,并且流速不断变化。水流在设备内沿水平方向流动,油垂直向上移动,泥垂直向下滑动,处理后水质不会产生二次污染等问题。用该设备处理大庆油田含油污水效果良好,完全可以代替现有工艺中的自然沉降罐和混凝沉降罐。     

Determination of PCBs, PCDDs and PCDFs in insulating oil samples from stored Chinese electrical capacitors by HRGC/HRMS

Homologue and congener profiles of polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in commercial PCBs formulations are key information for the source identification of PCBs contamination as well as for the risk assessment caused by potential exposure. The isotope dilution technology in combination with high resolution gas chromatography-high resolution mass spectrometry (HRGC/HRMS) has made the accurate determination of such profiles possible. So far, various commercial PCB formulations except Chinese products have been successfully determined. Two PCBs containing insulating oil samples from stored Chinese electrical capacitors have been determined with the same methodology for comparability. The total concentration PCBs in two oil samples were 790 000 μg g⁻¹ and 720 000 μg g⁻¹, respectively. TriCBs, TetraCBs, and DiCBs were found to be most abundant. Concentration of dioxins contamination in two samples is 650-670 ngTEQ g⁻¹, of which 69-71 ngTEQ g⁻¹ from PCDD/Fs with the predominant congeners of 1,2,7,8-TeCDF; 2,3,7,8-TeCDF; 2,3,4,7,8-PeCDF and 1,2,3,7,8-PeCDF. The contributions of DL-PCBs in total TEQ in both samples were more than 85%. The dioxin-like toxicity in insulating oils contained in electrical capacitors could be considered receive attention as an important dioxins source if such wastes are not managed in an environmentally sound manner.